[2022] HPE6-A66 Dumps are Available for Instant Access
Valid HPE6-A66 Dumps for Helping Passing HPE6-A66 Exam!
How much Aruba Certified Design Associate Exam costs
- Examination Name: Aruba Certified Design Associate Exam
- Length of Exam: 90 min
- Passing Score: 67% or higher
- Examination Fees: $180 USD
Understanding functional and technical aspects of Produce a detailed design specification document
The following will be asked from you in the HP HPE6-A66 exam dumps pdf:
- Given the customer requirementsfor a simple site environment determine the component details and document the high-level design
- Given a customer scenario for a simple campus environment, choose the appropriate componentsthat should be included in the BOM
- Given the customer'srequirements, explain and justify the recommended solution.
- Given a customer scenario of a simple site environment, design and document the logical and physical network solutions
- Given the customer scenario and service level agreements, document the licensing and maintenance requirements
Sample Questions
NewRocket requires a network connection between the main corporate building and a very small building on a campus. This connectivity needs to provide at least 700 Mbps throughput using a wireless solution. An AP will be placed inside each building's lobby near the entrance glass doorway that interconnects the two buildings. The distance between these two doors is approximately 30 feet (10 meters). The connection to the closest wiring closet in each respective building is approximately 280 feet (86 meters) for each AP. The customer needs a solution that will:
- Provide meshing on a dedicated 5 Ghz radio to interconnect the two buildings with an appropriate integrated antennas
- Provide a dedicated 5 Ghz radio for lobby connectivity
Which solution would best meet NewRocket's requirements?
- Aruba AP 535 with Cat 7 cabling
- Aruba AP 374 with MMF cabling
- Aruba AP 500 with MMF cabling
- The Aruba AP 387 with Cat 7 cabling
A network architect is analyzing the current wireless coverage in a new design. Standing 10 feet (approximately 3 meters) away from the AP, the architect tests the wireless signal from the AP. The architect then moves 20 feet (approximately 6 meters) away from the AP and repeats the test. Given that the architect detects no external interference with the signal, by how much would you expect the signal to degrade between the two tests?
- By a factor of 1
- By a factor of 8
- By a factor of 4
- By a factor of 2
A wiring closet with a POE+ switch is 300 feet (100 meters) away from an AP on a building floor. The AP's smart-rate port is connected to a smart-rate port on the switch, which is also capable of 10 Gbps. The cable type is Cat6a STP. What is the maximum speed that the customercan expect from the connected AP?
- 5 Gbps
- 10 Gbps
- 1 Gbps
- 2.5 Gbps
How would a network administrator view the price list of the equipment in one wiring closet?
- Create a Design Group in the Site; set the filter in the Layers to Design Group
- Create a Design Group in the site; set the filter in the BOM to the Design Group
- Create a Workspace in the site; set filter in the BOM to the Workspace
- Create a Wiring Closet in the site; set the filter in the Design Group to Wiring Closet
When a WLAN has to support nomadic devices, a network architect must primarily plan for which component in their design?
- Type of users
- Mobility requirements and usage
- Number of users per location
- Density of users
Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)
- Determining the RF channel bandwidth consumed per Barcode scanner
- Encountering RF interference by devices
- Roaming between APs
- Providing consistent performance on all available channels
- Implementing adequate security measures to ensure PCI compliance
A network architect is creating a new wireless solution for a customer. Wireless coverage is required throughout all four floors of two buildings on the same campus. Dynamic RF capabilities, including AirMatch, are required. Seamless roaming is required within and between the two buildings. Each floor will have approximately 20 APs and 6 external APs are required for connectivity between the two buildings.
Given this information, which Aruba solution would be the most cost-effective while still meeting the customer's requirements?
- A standalone 7008 controller per floor
- Two 7030 mobility controllers in a cluster
- An IAP cluster per floor
- Two 7205 mobility controllers in a cluster
Which must you perform in IRIS to assign a device to a Design Group?
- Drag and drop the device into the Site
- Right-click the device and select Set Layer Membership
- Right-click the device and select Set Design Group
- Drag and drop the device into the Design Group
A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards.
What type of survey should the network architect perform?
- Virtual
- Spectrum clearing
- Passive
- Active
NEW QUESTION 13
A network architect is doing a site survey for a new wireless design One concern the company has with the old wireless network is coverage. In some cases, APs would lose power and some employees in the network would lose wireless connectivity. The new design needs to prevent this issue from occurring. During the site survey, what are best practices to be followed in regards to the dBm signal level and the power of the AP to ensure adequate wireless coverage and minimal overlap of AP signals for the new design?
- A. AP power at 75% and a measurement of -90 dBM on the measuring device
- B. AP power at 75% and a measurement of -80 dBM on the measuring device
- C. AP power at 50% and a measurement of -65 dBM on the measuring device
- D. AP power at 100% and a measurement of -65 dBM on the measuring device
Answer: D
NEW QUESTION 14
A company has two buildings on a campus, where each building has three floors, which two wiring closets per floor Assume that there will be 24 APs connected via POE+ to each wiring closet, along with 128 wired user connections. Which backplane stacking solution will provide the necessary Ethernet port capacity for all devices on Building 1 Floor 2 and is fully meshed?
- A. Two 381 OM 24-port POE+ switches and three 381OM 48-port switches per wiring closet
- B. Two 2930F 24-port POE+ switches and three 2930F 48-port switches per wiring closet
- C. One 2930M 24-port POE+ switch and two 2930M 48-port switches per wiring closet
- D. One 381 OM 24-port POE+ switches and two 2930M 48-port switches per wiring closet
Answer: C
NEW QUESTION 15
Which must you perform in IRIS to assign a device to a Design Group?
- A. Right-click the device and select Set Layer Membership
- B. Drag and drop the device into the Design Group
- C. Right-click the device and select Set Design Group
- D. Drag and drop the device into the Site
Answer: B
NEW QUESTION 16
A company has two buildings on a campus that are approximately 700 feet (214 meters) apart with a clear line of site. No fiber exists between the buildings; however, there is a need for connecting the networks in the buildings together. The connection between the two buildings will need to support peak rates over 1 Gbps.
Which solution should the company choose that will meet their requirements as well as being cost-effective?
- A. Two outdoor AP 367s
- B. Two outdoor AP 387s
- C. Two outdoor AP 510s
- D. Multi-mode fiber between campus switches
Answer: A
NEW QUESTION 17
Which feature does the Aruba AP 387 support?
- A. Indoor usage
- B. 802.11 ax
- C. 60GHZRF
- D. included external directional antennas
Answer: C
NEW QUESTION 18
A network architect plans to use two ArubaOS 5406 switches in a wiring closet configured in a VSF domain The VSF link requires a 40 GDps connection Which SFP+ transceiver solutions would meet this requirement?
- A. SmartRate
- B. QSFP+ LC
- C. SFP
- D. QSFP28
Answer: A
NEW QUESTION 19
What is the main key for a network design to ensure users have a good experience running their applications'?
- A. Provide appropriate AP density.
- B. Determine the number of users per location.
- C. Provision adequate bandwidth.
- D. Implement appropriate security controls
Answer: A
NEW QUESTION 20
A company has hired a network architect to replace an existing legacy wireless and wired network The building is one-story and contains four wiring closets Based on the information the network architect gathered from the company, one 48-port POE+ switch and three 48-port non-POE+ switches will be placed in each wiring closet. One stacking domain should be created for each wiring closet that supports 40 Gbps uplinks.
Which stacking solution should the architect implement for the floor that meets the requirements and is the most cost-effective'?
- A. Distributed trunking
- B. VSF
- C. Backplane stacking
- D. VSX
Answer: D
NEW QUESTION 21
NewRocket requires a wireless capacity design 30 Aruba 510 APs will be connected to each wiring closet using SmartRate connections. Wireless coverage needs to be provided even if a POE+ switch loses power Because of security concerns, wired video cameras were recently installed throughout the facility. There are 12 of these per floor. 6 per wiring closet. The cameras are 802.11n WiFi capable and have power injectors from which to draw power.
Based on the POE+ needs of the mentioned devices, which solution would meet the POE+ requirements while still providing a redundant and cost-effective Wi-Fi solution for the devices that require POE+ for Building 1, Floor 2?
- A. One 2930M 48-port POE+ switch
- B. Two 2930M 24-port POE+ switches
- C. Two 2930F 24-port POE+ switches
- D. One 3810M 40G 8 HPE Smart Rate switch
Answer: A
NEW QUESTION 22
A network architect is creating a new wired design for a warehouse building. As a best practice, what length should the architect allow for the service loop in the wiring closets in this environment?
- A. 15-30 feet (5-10 m)
- B. 3 feet (1 m)
- C. 30-60 feet (10-20 m)
- D. 3-10 feet (1-3 m)
Answer: B
NEW QUESTION 23
A network architect is given the task to design a new network solution for NewStellar Company, Inc. NewSteiiar has a main corporate campus in a business park with two adjacent buildings. The network architect has given one floor to analyze, Building 1 Floor 2, shown in the attached exhibit.
Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. Each floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet {870 square meters).
Because of security concerns, video cameras will be installed throughout the facility. There are 16 of these per floor, 8 per wiring closet. The cameras are non-WiFi capable and require POE 802.3af-capable switch ports from which to draw power.
A wireless capacity design is required. Assuming that wireless coverage is required across the Building 1, Floor 2, including the central area, and that half the required APs will connect to each wiring closet, approximately how many POE+ ports will be required per wiring closet for all devices that have POE or POE+ needs?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 24
A company has a warehouse that requires ruggedized APs to provide wireless access The APs need to support these characteristics:
* 2 or more spatial streams
* 802.11 ac and 802.11 n support
Cat 7 Ethernet cabling will be used to connect the APs to POE+ capable switches Link aggregation should be employed between the APs and the Ethernet switches. Which would be the most cost-effective solution that would meet the company's requirements?
- A. AP 375 with external omnidirectional antennas
- B. AP 318 with external omnidirectional antennas
- C. AP 365 with integrated omnidirectional antennas
- D. AP 510 with external omnidirectional antennas and plastic AP cover
Answer: B
NEW QUESTION 25
Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)
- A. roaming between APs
- B. implementing adequate security measures to ensure PCI compliance
- C. determining the RF channel bandwidth consumed per Barcode scanner
- D. encountering RF interference by devices
- E. providing consistent performance on all available channels
Answer: B,E
NEW QUESTION 26
A customer has a need to track traffic patterns and anomalies on a pair of ArubaOS-CX 8400 series switches. Which technology will the customer need to deploy for these switches?
- A. Network Analysis Engine
- B. NetEdit
- C. 2 CiearPass
- D. Mobility First
Answer: B
NEW QUESTION 27
A customer requires a campus core virtualization solution that supports a dual control and management planes, as well as active-active forwarding paths. Which solution would meet the customer's requirements?
- A. Mesh stacking
- B. VSF
- C. Backplane stacking
- D. VSX
Answer: C
NEW QUESTION 28
A network architect plans to implement channel bonding in a new wireless design that involves dense deployment of APs. Which channel width would be optimal for this design?
- A. 10MHZ
- B. 40 MHZ
- C. 20 MHz
- D. 60 MHZ
Answer: D
NEW QUESTION 29
A network designer is documenting the number of physical sites for a customer that is within the scope of a redesign project. When determining the network purpose at each site, on what should the designer focus at each site? (Select two.)
- A. types of users and their devices
- B. ceiling height
- C. number of buildings
- D. square footage
- E. number of users
Answer: B,D
NEW QUESTION 30
NewStellar has a main corporate campus in a business park with two adjacent buildings that are 150 feet apart (46 meters). This is an open campus with no obstructions between the two buildings Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters) The network architect has given one floor to analyze. Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply, and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters).
The company has determined that Wi-Fi coverage will not include the central area of each floor, which includes the washrooms, stairs, elevators and supply and network cabinets. Based on a capacity design, approximately how many APs should a network architect add to each floor to plan the design in VisuaiRF?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 31
......
Updated HPE6-A66 Dumps Questions For HP Exam: https://www.passreview.com/HPE6-A66_exam-braindumps.html
UPDATED HP HPE6-A66 Exam Questions & Answer: https://drive.google.com/open?id=1eTU3nWdEc98peqbr_doigZ_bZzbYt3SE