Updated May-2026 Exam Engine for D-PST-DY-23 Exam Free Demo & 365 Day Updates
Exam Passing Guarantee D-PST-DY-23 Exam with Accurate Quastions!
EMC D-PST-DY-23 Exam consists of 60 multiple-choice questions that cover various topics related to the Dell PowerStore solution. These topics include Dell PowerStore hardware and software installation, storage configuration and management, data protection and recovery, and integration with other systems such as VMware and Microsoft SQL Server. By passing D-PST-DY-23 exam, you can showcase your skills and knowledge in deploying and managing Dell PowerStore storage solutions, which can help you advance your career as an IT professional.
EMC D-PST-DY-23 exam is a challenging exam that requires a deep understanding of Dell PowerStore storage solutions. It is a multiple-choice exam that consists of 60 questions, and candidates are given 90 minutes to complete the exam. To pass the exam, candidates must score at least 63% on the exam. D-PST-DY-23 exam is available in several languages, including English, Japanese, and Chinese, and is offered by Pearson VUE, a leading provider of IT certification exams.
EMC D-PST-DY-23 certification is an industry-recognized certification that demonstrates the candidate's expertise in Dell PowerStore Deploy 2023. Dell PowerStore Deploy 2023 Exam certification is ideal for professionals who want to enhance their career prospects in the field of storage systems. Dell PowerStore Deploy 2023 Exam certification also provides a competitive edge to the candidate in the job market.
NEW QUESTION # 32
Which three file replication operations are available in PowerStore Manager? (Choose three.)
- A. Reverse
- B. Unplanned Failover
- C. Resume
- D. Planned Failover
- E. Resynchronize
Answer: B,D,E
NEW QUESTION # 33
What is a result of removing a remote replication session?
- A. Replica data state is preserved on source system snapshot.
- B. Replica remains on the replication destination.
- C. Remote system relationship is removed.
- D. Replica is deleted from the replication destination.
Answer: B
NEW QUESTION # 34
What describes the remote replication Failover operation?
- A. It is run automatically by the replication source system in the event of a source system outage
- B. It is run from the replication source system by the administrator in the event of an outage on the system
- C. It is run automatically by the replication destination system in the event of a source system outage
- D. It is run from the replication destination system by the administrator in the event of a source system outage
Answer: D
NEW QUESTION # 35
Refer to the Exhibit.
Which port location in the graphic is used for network management connectivity on a PowerStore X?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 36
What is the maximum number of snapshot and replication rules that a protection policy supports?
- A. Up to four replication rules, and no more than one snapshot rule.
- B. Up to four rules, protection types cannot be mixed in the same policy.
- C. Up to four snapshot rules, and no more than one replication rule.
Answer: C
NEW QUESTION # 37
Which network topology is commonly used for connecting PowerStore nodes and switches?
- A. Mesh topology
- B. Ring topology
- C. Bus topology
- D. Star topology
Answer: D
NEW QUESTION # 38
What is a benefit of using thin provisioning for block storage in PowerStore?
- A. Reduced storage capacity waste
- B. Improved host access speeds
- C. Simplified network configurations
- D. Enhanced data encryption
Answer: A
NEW QUESTION # 39
What is the purpose of configuring Ethernet switching for a PowerStore system?
- A. To manage power distribution
- B. To establish network connectivity between storage nodes
- C. To enable Wi-Fi connectivity
- D. To optimize storage capacity
Answer: B
NEW QUESTION # 40 
An administrator is setting up a new ESXi cluster using NVMe over TCP. The administrator is given the following parameters:
Volume Details
Name: nvme-ds-01
Category: Virtualization
Application: Containers/Kubernetes
Volume Performance Policy: High
Size: 2 TB
Host Details
Name: ESXi-01
Initiator Type: NVMe
Host Mappings: NVMe
Use the simulator to add the host and the volume and give the host access to the volume using the above parameters.
When you have finished, continue to the next question.
Answer:
Explanation:
See the steps in Explanation.
Explanation:
1. On the simulator, click on theStoragetab on the left sidebar. Then click on theVolumessubtab. You will see a list of existing volumes on the cluster.
2. To create a new volume, click on theCreatebutton on the top right corner. A dialog box will appear where you can enter the volume details.
3. Enter the name of the volume asnvme-ds-01. Select the category asVirtualizationand the application asContainers/Kubernetes. These are optional fields that help you organize and identify your volumes.
4. Select the volume performance policy asHigh. This will optimize the volume for high performance and low latency. You can also customize the policy by clicking on theAdvancedbutton and adjusting the settings.
5. Enter the size of the volume as2 TB. You can also enable thin provisioning, compression, and deduplication if you want to save space and improve efficiency. Click on theCreatebutton to create the volume.
6. You will see a confirmation message that the volume has been created successfully. Click on theClosebutton to exit the dialog box. You will see the new volume in the list of volumes.
7. To add a new host, click on theHostssubtab on the left sidebar. You will see a list of existing hosts on the cluster.
8. To create a new host, click on theCreatebutton on the top right corner. A dialog box will appear where you can enter the host details.
9. Enter the name of the host asESXi-01. Select the initiator type asNVMe. This will enable the host to use the NVMe over TCP protocol to access the volumes.
10. To add the host mappings, click on theAdd Mappingbutton. A dialog box will appear where you can select the volume and the access type.
11. Select the volumenvme-ds-01from the drop-down menu. Select the access type asNVMe. This will map the volume to the host using the NVMe over TCP protocol. Click on theAddbutton to add the mapping.
12. You will see the mapping in the list of host mappings. You can add more mappings if you want to map more volumes to the host. Click on theCreatebutton to create the host.
13. You will see a confirmation message that the host has been created successfully. Click on theClosebutton to exit the dialog box. You will see the new host in the list of hosts.
14. You have completed the task of adding the host and the volume and giving the host access to the volume using the NVMe over TCP protocol. You can verify the configuration by clicking on the host or the volume and checking the details.
NEW QUESTION # 41
Refer to the Exhibit.
What is the base resource for Thin Clone 3?
- A. Volume 1
- B. Snapshot 3
- C. Snapshot 2
- D. Thin Clone 2
Answer: A
NEW QUESTION # 42
Refer to the Exhibit.
A Network administrator is failing to discover a PowerStore T system using the PowerStore Discovery Utility.
What might be the issue?
- A. Port 54 needs to be enabled
- B. Port 54 has not been set to trunk mode
- C. Discovery network uses only native VLAN
- D. Dedicated port needs to be used for discovery network
Answer: C
NEW QUESTION # 43
What are two supported combinations of source and destination vVol Storage Containers when replicating Resource Groups on PowerStore? (Choose two.)
- A. Cascade replication to three different sites.
- B. Multiple replications in different directions.
- C. One-to-many replication volumes from one source PowerStore to multiple destination PowerStore appliances.
- D. One-to-one replication arouofrom source storage container to destination storage container.
Answer: B,D
Explanation:
PowerStore supports a straightforward one-to-one relationship where a resource group in a source storage container is replicated to a destination storage container. This is the most common and simplest replication setup.
NEW QUESTION # 44
Refer to the Exhibit.
What happens to the parent resource of thin clone 3 if thin clone 2 is deleted?
- A. Snapshot 3 becomes the parent
- B. Thin clone 3 has an empty parent
- C. Thin clone 3 becomes parent
- D. Thin clone 1 becomes parent
Answer: A
NEW QUESTION # 45
A protection policy with snapshot and replication rules is applied to a file system.
What is the result?
- A. Applying the protection policy to the file system fails
- B. Snapshot rules get ignored and only replication rules get applied
- C. Both replication and snapshot rules get applied
- D. Replication rules get ignored and only snapshot rules get applied
Answer: D
NEW QUESTION # 46
What information does a host initiator typically provide to access PowerStore block storage?
- A. World Wide Names (WWNs) or IQNs
- B. Encryption keys
- C. SNMP community strings
- D. IP addresses of backup servers
Answer: A
NEW QUESTION # 47
A PowerStore X system is being implemented using Dell EMC S5248F-ON Ethernet switching as data switches.
What is required when configuring the VLT interconnects on the data switches?
- A. On each switch, select the switch management port MAC as the VLT MAC
- B. Configure the VLT MACs with a matching unique made-up address
- C. Assign the switch default route for the VLT traffic
- D. Set the VLT connection to the switch default VLAN
Answer: B
NEW QUESTION # 48
During the initial system configuration of PowerStore, what is the purpose of discovering storage resources?
- A. To assign IP addresses to nodes
- B. To optimize data deduplication
- C. To establish Fibre Channel connections
- D. To enable power management
Answer: A
NEW QUESTION # 49
Refer to the exhibit.
An administrator is setting up a new ESXi cluster using NVMe over TCP. The administrator is given the following parameters:
Volume Details
Name: nvme-ds-01
Category: Virtualization
Application: Containers/Kubernetes
Volume Performance Policy: High
Size: 2 TB
Host Details
Name: ESXi-01
Initiator Type: NVMe Host Mappings: NVMe
Use the simulator to add the host and the volume and give the host access to the volume using the above parameters.
When you have finished, continue to the next question.
Answer:
Explanation:
See the steps in Explanation.
1. On the simulator, click on theStoragetab on the left sidebar. Then click on theVolumessubtab. You will see a list of existing volumes on the cluster.
2. To create a new volume, click on theCreatebutton on the top right corner. A dialog box will appear where you can enter the volume details.
3. Enter the name of the volume asnvme-ds-01. Select the category asVirtualizationand the application asContainers/Kubernetes. These are optional fields that help you organize and identify your volumes.
4. Select the volume performance policy asHigh. This will optimize the volume for high performance and low latency. You can also customize the policy by clicking on theAdvancedbutton and adjusting the settings.
5. Enter the size of the volume as2 TB. You can also enable thin provisioning, compression, and deduplication if you want to save space and improve efficiency. Click on theCreatebutton to create the volume.
6. You will see a confirmation message that the volume has been created successfully. Click on theClosebutton to exit the dialog box. You will see the new volume in the list of volumes.
7. To add a new host, click on theHostssubtab on the left sidebar. You will see a list of existing hosts on the cluster.
8. To create a new host, click on theCreatebutton on the top right corner. A dialog box will appear where you can enter the host details.
9. Enter the name of the host asESXi-01. Select the initiator type asNVMe. This will enable the host to use the NVMe over TCP protocol to access the volumes.
10. To add the host mappings, click on theAdd Mappingbutton. A dialog box will appear where you can select the volume and the access type.
11. Select the volumenvme-ds-01from the drop-down menu. Select the access type asNVMe. This will map the volume to the host using the NVMe over TCP protocol. Click on theAddbutton to add the mapping.
12. You will see the mapping in the list of host mappings. You can add more mappings if you want to map more volumes to the host. Click on theCreatebutton to create the host.
13. You will see a confirmation message that the host has been created successfully. Click on theClosebutton to exit the dialog box. You will see the new host in the list of hosts.
14. You have completed the task of adding the host and the volume and giving the host access to the volume using the NVMe over TCP protocol. You can verify the configuration by clicking on the host or the volume and checking the details.
NEW QUESTION # 50
SIMULATION
An administrator must configure a new protection policy for an existing VM with the following parameters.
Rule Name: 2x5x14
Days: M-F
Every: 12 Hours
Retention: 14 Days
Access Type: Snapshot
Policy
Name: Bronze
Snap Rule: 2x5x14
Apply the policy to VM1.
When you have finished continue to the next question.
Answer:
Explanation:
See explanation below
Explanation:
NEW QUESTION # 51
Which storage type is typically used for storing user files, documents, and media in PowerStore?
- A. Cloud storage
- B. File storage
- C. Block storage
- D. Object storage
Answer: B
NEW QUESTION # 52
Which two migration tasks are configured during a non-disruptive import in PowerStore? (Choose two.)
- A. Refresh Volumes
- B. Start Copy
- C. Refresh Hosts
- D. Host Cleanup
Answer: A,C
NEW QUESTION # 53
What is the main advantage of block provisioning over file provisioning in storage systems?
- A. More efficient use of storage capacity
- B. Better compatibility with cloud storage
- C. Easier integration with virtualization technologies
- D. Faster data retrieval times
Answer: A
NEW QUESTION # 54
......
Exam Questions for D-PST-DY-23 Updated Versions With Test Engine: https://www.passreview.com/D-PST-DY-23_exam-braindumps.html
Test Engine to Practice Test for D-PST-DY-23 Valid and Updated Dumps: https://drive.google.com/open?id=1iI-vctlEMbBdaeaVDvpTceKnMZFz7JLa