Pass H35-580_V2.0 Exam in First Attempt Guaranteed 100% Cover Real Exam Questions [Jan-2024]
Valid H35-580_V2.0 test answers & Huawei H35-580_V2.0 exam pdf
Huawei H35-580_V2.0 exam consists of multiple-choice questions that cover a wide range of topics related to 5G network development and deployment. H35-580_V2.0 exam is conducted in English and is available globally through the Huawei Authorized Learning Partner (HALP) network. Candidates who pass the exam will receive a Huawei HCIA-5G-RNP&RNO V2.0 certificate, which is recognized by Huawei and the global telecommunications industry.
Huawei H35-580_V2.0 exam is designed for individuals who want to become certified in HCIA-5G-RNP&RNO V2.0. HCIA-5G-RNP&RNO V2.0 certification is ideal for professionals who want to stay up-to-date with the latest technologies and trends in the field of wireless networking.
NEW QUESTION # 28
What are characteristics of eCPRI links?(Select All that Apply)
- A. They require AAU support.
- B. They require dock synchronization.
- C. They are based on the TDM mechanism.
- D. They are based on the IP mechanism.
Answer: A,B,D
Explanation:
Explanation
According to the eCPRI Specification V2, eCPRI links have the following characteristics:
They require clock synchronization: eCPRI links use Ethernet as the transport layer, which does not provide inherent synchronization. Therefore, eCPRI links require external clock synchronization methods, such as IEEE 1588v2 Precision Time Protocol (PTP) or Synchronous Ethernet (SyncE).
They are based on the IP mechanism: eCPRI links use IP as the network layer, which provides routing and addressing functions for eCPRI messages. eCPRI links can use either IPv4 or IPv6 protocols.
They require AAU support: eCPRI links connect between Radio Equipment Control (REC) and Radio Equipment (RE) in a base station. AAU (Active Antenna Unit) is a type of RE that integrates RF and antenna functions in one unit. Therefore, eCPRI links require AAU support to enable flexible functional split options and reduce fronthaul bandwidth requirements.
eCPRI links are not based on the TDM mechanism because they do not use fixed time slots to transmit data.
Instead, they use variable-length packets to transmit data according to different service requirements.
NEW QUESTION # 29
Which of the following AAUs support vertical beamforming?(Select All that Apply)
- A. 4T4R
- B. 8T8R
- C. 64T64R
- D. 32T32R
Answer: C,D
Explanation:
Explanation
According to the 5G Beamforming: An Engineer's Overview, 32T32R and 64T64R AAUs support vertical beamforming. AAU stands for Active Antenna Unit, which is a type of antenna that integrates RF and antenna functions in one unit. Vertical beamforming is a technique that uses multiple antenna elements in a vertical array to form beams in different elevation angles. 32T32R and 64T64R AAUs have enough antenna elements to support vertical beamforming, while 8T8R and 4T4R AAUs do not have enough antenna elements to support vertical beamforming effectively.
NEW QUESTION # 30
In an intra-frequency reselection procedure, which message contains the rangeToBestCell parameter?
- A. SIB1
- B. SIB4
- C. SIB2
- D. SIB3
Answer: C
Explanation:
Explanation
According to the 38.331 RRC, SIB2 is the message that contains the rangeToBestCell parameter, which is used for intra-frequency cell reselection. The rangeToBestCell parameter defines a threshold for cell ranking based on RSRP (Reference Signal Received Power). A UE may only reselect to a cell if its RSRP exceeds that of the serving cell by at least rangeToBestCell dB.
NEW QUESTION # 31
Which of the following statements about the space principles for 5G BBU installation are correct?(Select All that Apply)
- A. If the installation space is insufficient, install 5G boards directly into the existing 4G B8U.
- B. If the remaining space of an existing cabinet is greater than 4 U, the BBU can be installed directly.
- C. If the space is greater than 600 mm, a cabinet can be added to install the BBU.
- D. If the installation space is insufficient, the BBU can be installed on a wall. Ensure that the wall meets the load bearing requirements.
Answer: B,C,D
Explanation:
Explanation
According to the Hardware Description: Bbu5900 V100r013c10, these statements are correct about the space principles for 5G BBU installation:
If the installation space is insufficient, the BBU can be installed on a wall. Ensure that the wall meets the load bearing requirements: The BBU can be installed on a wall using wall-mounted brackets. The wall must be able to bear at least four times the weight of the BBU and must be flat and vertical. The installation height of the BBU must not exceed 2 m.
If the space is greater than 600 mm, a cabinet can be added to install the BBU: The BBU can be installed in a cabinet that meets the requirements of Huawei base stations. The cabinet must have a width of 19 inches and a depth of at least 600 mm. The cabinet must also provide sufficient ventilation, grounding, and lightning protection for the BBU.
If the remaining space of an existing cabinet is greater than 4 U, the BBU can be installed directly: The BBU can be installed in an existing cabinet that has enough space for it. The BBU has a height of 2 U, so it requires at least 4 U of space in a cabinet. The existing cabinet must also meet the requirements of Huawei base stations.
The other statement is incorrect about the space principles for 5G BBU installation:
If the installation space is insufficient, install 5G boards directly into the existing 4G B8U: This statement is not supported by Huawei base stations. The 5G boards cannot be installed directly into the existing 4G B8U because they have different slot distributions and board types. The 5G boards can only be installed in a BBU5900 subrack that supports both LTE and NR modes.
NEW QUESTION # 32
In cases where the same devices are used, which of the following link budget parameters may differ depending on use in either densely populated urban areas or rural areas?(Select All that Apply)
- A. Penetration loss
- B. Shadow fading margin
- C. Antenna gain
- D. Area coverage rate
Answer: A,B,D
Explanation:
Explanation
The link budget parameters that may differ depending on use in either densely populated urban areas or rural areas are area coverage rate, shadow fading margin, and penetration loss. The area coverage rate is the percentage of area within a cell that can receive a signal above a certain threshold. In densely populated urban areas, the area coverage rate may be lower than in rural areas due to more interference and obstacles 13. The shadow fading margin is an additional margin added to the link budget to account for the variation of signal strength due to obstacles in the propagation path. In densely populated urban areas, there may be more buildings and structures that cause shadow fading than in rural areas, so a larger shadow fading margin may be needed 14. The penetration loss is the loss of signal strength when it passes through walls or windows into buildings. In densely populated urban areas, there may be more indoor users than in rural areas, so a larger penetration loss may be considered 15. The antenna gain is not a parameter that depends on use in either densely populated urban areas or rural areas. It is a parameter that depends on the antenna design and configuration, which are usually fixed for a given system 16.
NEW QUESTION # 33
The PCFICH and PHICH channels have been deleted from the physical layer in 5G compared with LTE.
- A. True
- B. False
Answer: A
Explanation:
Explanation
According to the 5G NR Protocol Structure Changes - An Overview, the PCFICH and PHICH channels have been deleted from the physical layer in 5G compared with LTE, because they are no longer needed due to the flexible frame structure and numerology of 5G NR.
NEW QUESTION # 34
In which of the following areas is overlapping coverage unlikely to occur?
- A. Inside a tunnel
- B. Around areas with water
- C. High-rise buildings
- D. Crossroads in dense urban areas
Answer: B
Explanation:
Explanation
According to the HCIA-5G - Huawei Enterprise Support Community, overlapping coverage is likely to occur in areas such as inside a tunnel, crossroads in dense urban areas, and high-rise buildings, which correspond to options A, B, and C. These areas have complex propagation environments and multiple paths for signals to reach the UE. Around areas with water, overlapping coverage is unlikely to occur because water can reflect signals and reduce interference from other cells, which corresponds to option D.
NEW QUESTION # 35
Which of the following problems may cause SCTP link disconnection over the N2 interface?(Select All that Apply)
- A. PLMN configurations are incorrect.
- B. The SCTP port configuration is incorrect.
- C. Physical ports are faulty.
- D. Routes are not configured.
Answer: A,B,C,D
Explanation:
Explanation
According to the Troubleshooting Guide for Huawei 5G Base Stations, the possible causes of SCTP link disconnection over the N2 interface are as follows:
Routes are not configured: If the routes between the base station and the core network are not configured correctly, the SCTP link cannot be established or may be disconnected.
PLMN configurations are incorrect: If the PLMN configurations on the base station and the core network do not match, the SCTP link cannot be established or may be disconnected.
Physical ports are faulty: If the physical ports on the base station or the core network are faulty, such as damaged cables, loose connectors, or port errors, the SCTP link cannot be established or may be disconnected.
The SCTP port configuration is incorrect: If the SCTP port configuration on the base station or the core network is incorrect, such as using a reserved port number or a conflicting port number, the SCTP link cannot be established or may be disconnected.
NEW QUESTION # 36
If AFGIobal is 15 kHz, FREF-Offs is 3000 MHz, and NREF-Offs is 600000, which of the following is the NR Absolute Radio Frequency Channel Number (NR-ARFCN) corresponding to 3300 MHz?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Explanation
According to the NR-ARFCN (NR absolute radio frequency channel number), the NR-ARFCN value consists of two components: the band indicator and the channel number. The band indicator represents the frequency band on which the carrier frequency lies, while the channel number represents the specific carrier frequency within that band. The NR-ARFCN value is calculated by the following formula:
NR-ARFCN = FREF-Offs + NREF-Offs + FGlobal * (Fcarrier - FREF-Offs) / AFGIobal where FREF-Offs is the reference frequency offset, NREF-Offs is the reference NR-ARFCN offset, FGlobal is the global frequency raster, Fcarrier is the carrier frequency, and AFGIobal is the absolute frequency granularity.
Given that AFGIobal is 15 kHz, FREF-Offs is 3000 MHz, and NREF-Offs is 600000, we can plug in these values and Fcarrier = 3300 MHz into the formula and get:
NR-ARFCN = 3000 + 600000 + 5 * (3300 - 3000) / 0.015 NR-ARFCN = 633000
Therefore, the correct answer is A.
NEW QUESTION # 37
5G can meet service requirements in scenarios with a mobility speed of up to 500 km/h.
- A. True
- B. False
Answer: A
Explanation:
Explanation
According to the Huawei Career Certification Learning, 5G can meet service requirements in scenarios with a mobility speed of up to 500 km/h, which is much higher than the 4G limit of 350 km/h.
NEW QUESTION # 38
Which of the following channels/signals is used by the UE to measure and obtain the CQI?
- A. PDSCH
- B. OSSB
- C. PDCCH
- D. CSI-RS
Answer: D
Explanation:
Explanation
According to the 5G NR Downlink CSI Reporting, CSI-RS is the channel/signal that is used by the UE to measure and obtain the CQI. CSI-RS stands for Channel State Information Reference Signal, which is a downlink reference signal transmitted by the gNodeB to enable the UE to estimate the channel quality and feedback the CQI to the gNodeB. The CQI is an indicator of how good or bad the channel quality is, and it can be used by the gNodeB to adjust the modulation and coding scheme for data transmission.
NEW QUESTION # 39
In NSA networking, which of the following methods can be used to support X2 interconnection between an eNodeB and a gNodeB?(Select All that Apply)
- A. IPRAN interconnection between subracks
- B. Interconnection via backplane in a subrack
- C. Interconnection through CI interfaces on the UMPT boards in different subracks
- D. Interconnection through HEI interfaces on the UBBP boards in different subracks
Answer: A,C
Explanation:
Explanation
According to the 5G EN-DC Architecture and Interfaces, there are two methods that can be used to support X2 interconnection between an eNodeB and a gNodeB in NSA networking:
Interconnection through CI interfaces on the UMPT boards in different subracks: The UMPT is a universal main processing and transmission unit that provides main processing and transmission functions for a subrack. The UMPT has two CI interfaces that can be used for X2 interconnection with other base stations. The CI interfaces support CPRI, OBSAI, and eCPRI protocols and can use optical fibers or electrical cables for transmission. The CI interfaces can be configured as master or slave interfaces depending on the network topology.
IPRAN interconnection between subracks: IPRAN is an IP-based radio access network that uses IP transport technologies to carry base station traffic over Ethernet or MPLS networks. IPRAN can support X2 interconnection betweendifferent base stations by using IP routers or switches. IPRAN can provide flexible networking, high bandwidth, low latency, and high reliability for X2 interconnection.
The other two methods are not valid for X2 interconnection between an eNodeB and a gNodeB:
Interconnection via backplane in a subrack: This method is only applicable for X2 interconnection between two eNodeBs or two gNodeBs that are installed in the same subrack. The backplane is the internal bus that connects different boards within a subrack. The backplane supports CPRI, OBSAI, and eCPRI protocols and can provide high-speed data transmission between boards.
Interconnection through HEI interfaces on the UBBP boards in different subracks: This method is not supported by Huawei base stations. The HEI interface is a high-speed Ethernet interface that is used for data transmission between base stations and core networks or transport networks. The HEI interface supports S1, Xn, F1, E1, and N2 protocols and can use optical fibers or electrical cables for transmission. The HEI interface cannot be used for X2 interconnection between base stations.
Therefore, the correct answer is A and D.
NEW QUESTION # 40
Which of the following is not a typical application scenario of massive MIMO?
- A. Densely populated urban areas
- B. Suburban areas with light traffic
- C. High-rise buildings
- D. Large venues
Answer: B
Explanation:
Explanation
Massive MIMO is a technology that uses a large number of antennas at the base station to serve multiple users simultaneously, thereby increasing the spectral efficiency and capacity of the wireless system 1. Massive MIMO is especially suitable for application scenarios where there is high user density and high traffic demand, such as large venues, high-rise buildings, and densely populated urban areas 2. Suburban areas with light traffic do not have such high requirements for spectral efficiency and capacity, and therefore are not a typical application scenario of massive MIMO.
NEW QUESTION # 41
Which of the following factors does not need to be considered during PUSCH power calculation?
- A. SCS configuration for the PUSCH
- B. Number of PUSCH RBs
- C. MCS index of the PUSCH
- D. Number of PUSCH symbols in the time domain
Answer: C
Explanation:
Explanation
According to the 5G NR Uplink Power Control Procedure, MCS index of the PUSCH is not a factor that needs to be considered during PUSCH power calculation. The MCS index determines the modulation and coding scheme of the PUSCH, but it does not affect the transmit power. The other factors, such as number of PUSCH RBs, SCS configuration for the PUSCH, and number of PUSCH symbols in the time domain, are all involved in the PUSCH power calculation formula.
NEW QUESTION # 42
Handover execution failures can use the counters to collect failure reasons in SA networking.
- A. True
- B. False
Answer: A
Explanation:
Explanation
According to the HCIA-5G V2.0 Exam Outline, handover execution failures can use the counters to collect failure reasons in SA networking, which corresponds to option A. The counters include
N.HO.Exec.Fail.RadioResFail, N.HO.Exec.Fail.TAExceed, N.HO.Exec.Fail.NoRespFromUE, and
N.HO.Exec.Fail.Other.
NEW QUESTION # 43
In SA networking, which of the following is the first step for a UE to perform a cell search?
- A. Synchronize frames and obtain PCI group number.
- B. Synchronize half-frames and obtain the ID within a PCI group.
- C. Obtain other cell information.
- D. Obtain the cell signal quality.
Answer: A
Explanation:
Explanation
According to the 5G SA Cell Search & Network Entry Matrix, the first step for a UE to perform a cell search in SA networking is to synchronize frames and obtain PCI group number. This step involves the following sub-steps:
The UE scans the available frequency range to detect the presence of Synchronization Signal Blocks (SSBs) from different base stations. SSBs are periodic signals that contain essential synchronization and system information for cell search and initial access.
The UE selects an SSB with the strongest signal strength and decodes its Primary Synchronization Signal (PSS) and Secondary Synchronization Signal (SSS). The PSS and SSS are part of the SSB and provide coarse timing synchronization and cell identity information.
The UE uses the PSS and SSS information to synchronize its internal clock with that of the base station and obtain the Physical Cell Identity (PCI) group number. The PCI group number is a 9-bit value that identifies a group of 8 cells that share the same PSS and SSS sequences. The PCI group number ranges from 0 to 1007.
The other steps for a UE to perform a cell search in SA networking are:
Synchronize half-frames and obtain the ID within a PCI group: The UE further synchronizes its timing with the base station by decoding its Narrowband Synchronization Signal (NSSS), which is also part of the SSB. The NSSS provides more precise timing information and the ID within a PCI group, which is a
3-bit value that identifies a specific cell within a PCI group. The ID within a PCI group ranges from 0 to
7. By combining the PCI group number and the ID within a PCI group, the UE can obtain the full PCI, which is a 10-bit value that uniquely identifies a cell.
Obtain other cell information: The UE decodes other signals and channels in the SSB to acquire other cell information, such as system bandwidth, subcarrier spacing, frame structure, etc. These signals and channels include Demodulation Reference Signals (DMRS), Master Information Block (MIB), System Information Block (SIB), etc.
Obtain the cell signal quality: The UE measures the cell signal quality based on various indicators, such as Reference Signal Received Power (RSRP), Reference Signal Received Quality (RSRQ), Signal-to-Interference-plus-Noise Ratio (SINR), etc. These indicators reflect the strength, quality, and interference level of the received signal.
NEW QUESTION # 44
Which of the following statements about link budget parameters is incorrect?
- A. The higher the edge service rate, the lower the required SINR demodulation threshold.
- B. The shadow fading margin is related to the edge coverage rate.
- C. The interference margin is relatively small on high frequency bands.
- D. The antenna gain of the 64T64R A All is approximately 24 dBi.
Answer: A
Explanation:
Explanation
A link budget is an accounting of all the power gains and losses that a communication signal experiences in a telecommunication system 8. A link budget can be used to determine the received signal-to-interference-plus-noise ratio (SINR), which is a measure of the quality of the signal at the receiver.
The SINR demodulation threshold is the minimum SINR required to demodulate the signal successfully. The SINR demodulation threshold depends on the modulation and coding scheme (MCS) used by the transmitter, which in turn depends on the service rate or data rate required by the application 9. Generally, the higher the service rate, the higher the MCS level, and therefore the higher the SINR demodulation threshold. Thus, statement A is incorrect. The other statements are correct. The interference margin is relatively small on high frequency bands because there are fewer co-channel interferers due to smaller cell sizes 10. The shadow fading margin is related to the edge coverage rate because it accounts for the variation of signal strength due to obstacles in the propagation path 11. The antenna gain of the 64T64R AAU is approximately 24 dBi according to Huawei's product specifications 12.
NEW QUESTION # 45
Which of the following channels/signals require demodulation reference signals (DMRSs)?(Select All that Apply)
- A. DPDCCH
- B. DCSI-RS
- C. DPBCH
- D. DPOSCH
Answer: A,C,D
Explanation:
Explanation
According to the 5G NR Physical Layer Specifications, demodulation reference signals (DMRSs) are required for the following channels/signals in the downlink and uplink:
Downlink Physical Broadcast Channel (DPBCH)
Downlink Physical Downlink Control Channel (DPDCCH)
Downlink Physical Shared Channel (DPOSCH)
Uplink Physical Random Access Channel (PRACH)
Uplink Physical Uplink Control Channel (PUCCH)
Uplink Physical Uplink Shared Channel (PUSCH)
NEW QUESTION # 46
How many RBs are included when a bandwidth of 100 MHz and a subcarrier spacing of 60 kHz are used in a
5G cell?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
Explanation
To find the number of RBs in a 5G cell, we need to know the bandwidth and the subcarrier spacing of the cell.
The bandwidth is the total frequency range allocated for the cell, while the subcarrier spacing is the frequency separation between adjacent subcarriers in the cell. A RB is a group of 12 consecutive subcarriers in the frequency domain 12. Therefore, the number of RBs in a 5G cell can be calculated by dividing the bandwidth by the product of the subcarrier spacing and 12.
Given that the bandwidth is 100 MHz and the subcarrier spacing is 60 kHz, we can use the following formula to find the number of RBs:
Number of RBs = Bandwidth / (Subcarrier spacing * 12) Number of RBs = 100 MHz / (60 kHz * 12) Number of RBs = 100000 kHz / 720 kHz Number of RBs = 138.888...
However, since the number of RBs must be an integer, we need to round it down to the nearest multiple of
3 3. This is because the NR standard defines different frequency ranges for different subcarrier spacings, and each frequency range has a minimum and maximum number of RBs that are multiples of 3 4. For example, for subcarrier spacing of 60 kHz, the frequency range is from 24250.08 MHz to 52600.08 MHz, and the minimum and maximum number of RBs are 66 and 273, respectively.
Therefore, the closest multiple of 3 to 138.888... is 135. However, this number is not valid because it is lower than the minimum number of RBs for subcarrier spacing of 60 kHz. The next valid multiple of 3 is 273, which is also the maximum number of RBs for subcarrier spacing of 60 kHz. Therefore, the correct answer is C. 273.
NEW QUESTION # 47
Which of the following boards in a base station support CPU usage measurement?(Select All that Apply)
- A. DUB8P
- B. DUPEU
- C. DFAN
- D. DUMPT
Answer: A,B,D
Explanation:
Explanation
According to the Career Certification - Huawei Enterprise, DUB8P, DUPEU, and DUMPT are boards in a base station that support CPU usage measurement, which correspond to options B, C, and D. DFAN is a fan board that does not support CPU usage measurement, which corresponds to option A.
NEW QUESTION # 48
Which of the following common messages need to be scheduled?(Select All that Apply)
- A. SIB
- B. RA Response
- C. MIB
- D. Paging
Answer: A,C,D
Explanation:
Explanation
According to the 5G NR Physical Layer Specifications, Paging, SIB, and MIB are common messages that need to be scheduled. Paging is a message that is used to notify a UE of incoming data or system information when it is in idle mode or connected mode inactive state. SIB stands for System Information Block, which is a message that contains various system parameters and configuration information for UEs. MIB stands for Master Information Block, which is a message that contains essential system information such as system frame number and subcarrier spacing. These common messages need to be scheduled because they are transmitted periodically and have fixed time-frequency resources.
NEW QUESTION # 49
Which of the following channels is used to send uplink power control commands?
- A. POSCH
- B. PUCCH
- C. PUSCH
- D. PDCCH
Answer: D
Explanation:
Explanation
According to the Uplink Power Control, PDCCH is the channel that is used to send uplink power control commands, also known as TPC commands. These commands indicate how much power should be increased or decreased by the UE for PUSCH or PUCCH transmissions.
NEW QUESTION # 50
Which of the following boards support CPU usage query?(Select All that Apply)
- A. UMPT
- B. FAN
- C. UPEU
- D. UBBP
Answer: A,C,D
Explanation:
Explanation
According to the Huawei 5G Base Station Product Description, the following boards support CPU usage query:
UPEU (Universal Power and Environment Interface Unit): It provides power supply and environment monitoring functions for other boards in a subrack. It supports CPU usage query through commands or web pages.
UMPT (Universal Main Processing and Transmission Unit): It provides main processing and transmission functions for a subrack. It supports CPU usage query through commands or web pages.
UBBP (Universal Baseband Processing Unit): It provides baseband processing functions for a subrack.
It supports CPU usage query through commands or web pages.
The FAN (Fan Unit) does not support CPU usage query because it does not have a CPU.
NEW QUESTION # 51
Which of the following protocols/data belong to Layer 3 of the Uu interface?(Select All that Apply)
- A. RRC protocol
- B. IP data
- C. MAC protocol
- D. RLC protocol
Answer: A
Explanation:
Explanation
According to the LTE user plane protocol stack, the Layer 3 of the Uu interface consists of the RRC protocol and the IP data. The RRC protocol is responsible for radio resource management, access control, handover and mobility, and encryption and integrity protection. The IP data is the payload of the user plane that is transmitted over the PDCP layer.
NEW QUESTION # 52
In order to achieve ideal coverage, what is the clearance requirement around an antenna?
- A. 5000-10000m
- B. 5-10m
- C. 50-100m
- D. 1-5m
Answer: B
Explanation:
Explanation
In order to achieve ideal coverage, there should be a clearance zone around an antenna of at least d, where d is the Fraunhofer or Rayleigh distance at which the near/far-field transition zone exists 17. This distance depends on the largest dimension of the antenna, D, and the operating wavelength, \uF06C. Ideally, D should be at least a half of a wavelength, which gives a minimum clearance zone of a half-wavelength. For example, at 2.4 GHz, the wavelength is about 0.125 m, so the minimum clearance zone is about 0.0625 m. However, in practical situations, this clearance zone is often compromised and the effects must be determined through simulation or empirical measurement 18. A general guideline is to have a clearance zone of 5-10 m around an antenna to avoid significant degradation of performance 19. Therefore, the best answer is C.
NEW QUESTION # 53
......
Huawei H35-580_V2.0 (HCIA-5G-RNP&RNO V2.0) Certification Exam is a challenging exam that requires candidates to have a deep understanding of 5G technology and its applications. Candidates who pass the exam are recognized as certified 5G Radio Network Planning and Optimization professionals, which opens up numerous career opportunities in the field of telecommunications. HCIA-5G-RNP&RNO V2.0 certification is recognized globally and is highly valued by employers in the telecommunications industry.
H35-580_V2.0 Exam Questions – Valid H35-580_V2.0 Dumps Pdf: https://www.passreview.com/H35-580_V2.0_exam-braindumps.html
Verified H35-580_V2.0 dumps Q&As - Pass Guarantee: https://drive.google.com/open?id=1r6KLmLk92UhrvVEr4weH-xDZ1Ku0svBN