PDF Download Free of 350-601 Valid Practice Test Questions
350-601 Test Engine files, 350-601 Dumps PDF
Cisco 350-601 is a new exam that's directly geared towards the following certifications: CCIE Data Center, CCNP Data Center, and Cisco Certified Specialist – Data Center Core. In essence, this test is usually known as Implementing Cisco Data Center Core Technologies (DCCOR) and validates one's knowledge of the most basic and common areas in the field.
Career Opportunities
Excelling in the Cisco 350-601 exam will help you qualify for different technical roles, and some of them are discussed below:
- Network operations engineer
Network operations engineers, on the other hand, are tasked with performing a scheduled review of system firmware, iOS, and application software. These individuals manage networks, servers, and other relevant equipment to streamline business processes. In many organizations, they work closely with other support staff to identify and document measurement requirements, troubleshoot different solutions, and provide administrative support in case of incident management or reporting. A typical network operation engineer in the modern IT industry earns up to $93k in the USA, according to PayScale.
- Senior data center engineer
Senior data center engineers are responsible for installing, testing, and maintaining a wide variety of IT communication infrastructure within data centers. These individuals spearhead engineering tasks, design project documentation, and give valuable technical advice to help manage different issues within data center infrastructures. According to ZipRecruiter, a vast majority of senior data center engineers earn an average of $115k annually.
- Data center network engineer
A data center network engineer is a competent IT professional with a crucial role in managing the everyday operations of Network Operations Centers (NOC). These individuals interconnect network-centered and physical devices with the required equipment to successfully erect data center facilities. While their job majorly involves streamlining digital connections within the nodes of data center infrastructure, they still have a crucial role in installing or maintaining applications, network servers, and clients using a unified map. This ensures seamless running and monitoring of several data centers under the same environment. At the moment, most of the data center network engineers are earning a mean annual salary of $94k, as stated on ZipRecruiter.
NEW QUESTION 116
Refer to the exhibit. An engineer needs to implement streaming telemetry on a cisco MDS 9000 series switch. The requirement is for the show command data to be collected every 30 seconds and sent to receivers. Which command must be added to the configuration meet this requirement?
- A. Sensor-grp 200 sample-period 30000
- B. Sensor-grp 200 sample-period 30
- C. Snsr-grp 200 sample-interval 30
- D. Snsr-grp 200 sample-interval 30000
Answer: D
NEW QUESTION 117
Refer to the exhibit.
Refer to the exhibit The communication between the web server and the application server experiences poor performance The network engineer must collect the traffic between the two servers, including the payload for more investigation The collected data must be sent from the remote site to the headquarters. Which action accomplishes this goal?
- A. Configure an ERSPAN session between N5K-1 and N5K-2.
- B. Configure NetFlow on N5K-1 to send the data to the monitor server
- C. Configure a SPAN session between N5K-1 and N5K-2
- D. Configure SNMP on N5K-1 to send the data to the monitor server
Answer: A
NEW QUESTION 118
Refer to the exhibit.
The STP priority of N7K-1 and N7K-2 are the lowest in the network. Which statement describes STP on the vPC?
- A. N7K-2 appears as the STP root.
- B. N7K-1 and N7K-2 appear as a single STP root.
- C. N7K-1 preempts N7K-2 as the STP root.
- D. N7K-1 appears as the STP root.
Answer: B
NEW QUESTION 119
An engineer must recover configuration on a Cisco MDS 9000 Series switch from a previous version that was backed up to bootflash and then verify the restoration.
Drag and drop the commands on the left to the correct order on the right.
Answer:
Explanation:
Explanation
Graphical user interface, text, application, email Description automatically generated
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/nx-os/configuration/guides/fund/ fund_nx-os_5-x/b_Cisco_MDS_9000_Series_NX-OS_Fundamentals_Configuration_Guide_Release_5-x/ b_Cisco_MDS_9000_Series_NX-OS_Fundamentals_Configuration_Guide_Release_5-x_chapter_01000.html
NEW QUESTION 120
APIC EPG Resolution Immediacy is set to "Immediate" Which statement is true about the Deployment Immediacy for VMM domains associated to EPGs?
- A. If "immediate" is selected the policy is programmed in the hardware as soon as the leaf is booted.
- B. If "On demand" is selected, the policy is programmed in the hardware only when the APIC detects a VM created in the EPG.
- C. The "Immediate" and "On demand" options require a port group to be created on the VDS.
- D. If "On demand" is selected the policy is programmed in the hardware only when the first packet is received through the data path.
Answer: D
Explanation:
Explanation
"Deployment Immediacy On demand - Specifies that the policy is programmed in the hardware policy CAM only when the first packet is received through the data path."
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/b_ACI-Fundamenta
NEW QUESTION 121
An engineer implements an ACI fabric and must implement microsegmentation of endpoints within the same IP subnet using a network-based attribute. The attribute mapping must allow IP subnet independence. Which attribute must be selected?
- A. Custom
- B. IP
- C. Tag
- D. MAC address
Answer: D
Explanation:
If you want to use a network-based attribute and classify IP addresses in the same subnet, you must use the MAC-based network attribute. IP-based microsegmented EPGs do not support classification for IP addresses in the same subnet. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/3-x/virtualization/b_ACI_Virtualization_Guide_3_1_1/b_ACI_Virtualization_Guide_3_1_1_chapter_0100.html
NEW QUESTION 122
Refer to the exhibit.
All switches are configured with the default OSPF priority. Which configuration should be applied to ensure that the SW2 Cisco Nexus switch controls the LSA floods and advertises the network to the remaining nodes in the OSPFv2 area?
- A. SW2# configure terminal SW2 (config)# router ospf 1 SW2 (config-router)# router-id 10.10.10.22
- B. SW2# configure terminal SW2 (config)# interface ethernet 1/1 SW2 (config-if)# ip ospf priority 0
- C. SW2# configure terminal SW2 (config)# interface ethernet 1/1 SW2 (config-if)# ip ospf priority 1
- D. SW2# configure terminal SW2 (config)# interface ethernet 1/1 SW2 (config-if)# ip ospf priority 255
Answer: D
Explanation:
Priority in OSPF is mainly used to influence/determine a designated router/backup designated router for a network. By default, the priority is 1 on all routers. A router with a high priority will always win the DR/BDR election process.
NEW QUESTION 123 
Refer to the exhibit. A network engineer is configuring the Smart Call Home feature on a Cisco Nexus Series Switch. An email must be generated that contains the last 100 lines of the log every time a new piece of hardware is inserted into the chassis. Which command must be added to the configuration to receive the email?
- A. alert-group Operations user-def-cmd show logging last 100
- B. alert-group Linecard-Hardware user-def-cmd show logging last 100
- C. destination-profile Operations alert-group Inventory
- D. destination-profile Operations message-level 2
Answer: B
NEW QUESTION 124
Due to a domain name change at a customer site, a Cisco UCS cluster must be renamed. An engineer must recommend a solution to ensure that the Cisco UCS Manager is available over HTTPS. Which action accomplishes this goal?
- A. Reinstall the cluster to generate the default key ring certificate
- B. Generate a new default key ring certificate from the Cisco UCS Manager
- C. Reboot the SSO component of the Cisco UCS Manager
- D. Regenerate the default key ring certificate manually
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Managem
NEW QUESTION 125
A Cisco MDS 9000 Series Switch is configured for SAN Analytics and SAN Telemetry Streaming. An engineer must enable analytics for NVMe on interfaces in the range of fc1/1-12. Due to a large amount of traffic generated in the SAN environment, the data must be collected at regular intervals of 60 seconds from ports fc 1-12 and then for ports fc13-24 for the next 60 seconds. Ports in the range fc4/13-14 were already enabled for analytics. Which set of commands must be used to meet these requirements?
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: A
NEW QUESTION 126
Which method must a network engineer use to upgrade the BIOS firmware or a Cisco UCS standalone C- Series rack-mount server?
- A. Use the U-ACPI Interface.
- B. Use the Cisco host firmware policy.
- C. Use the Cisco host upgrade utility.
- D. Use the Cisco hardware upgrade utility.
Answer: C
NEW QUESTION 127
DRAG DROP
Drag and drop the storage technologies from the left onto the correct descriptions on the right.
Select and Place:
Answer:
Explanation:
Section: Security
NEW QUESTION 128
An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Series switch. Drag and drop the configuration steps from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION 129
Which server policy is used to install new Cisco IMC software on a server?
- A. hypervisor firmware policy
- B. BIOS software policy
- C. host firmware policy
- D. Cisco IMC software policy
Answer: C
NEW QUESTION 130
An engineer implements SPAN configuration on an Nexus 5000 series switch. Which two commands are necessary to complete the SPAN session configuration? (Choose two)
- A. Configure switchport speed 4000 under interface fc2/2.
- B. Configure the switchport monitor under interface fc2/2
- C. Configure session type fc under monitor session 1.
- D. Configure the switchport mode SD under interface fc2/2.
- E. Configure the switchport mode SD under interface tc2/1.
Answer: A,B
NEW QUESTION 131
Refer to the exhibit.
In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:
* R1 must be the active RP.
* R2 must be the backup RP that is used only if R1 is not reachable
Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.
Answer:
Explanation:
Explanation
10.10.32.121/29 ,
10.10.32.122,
point-to-point ,
sparse-mode
NEW QUESTION 132
An engineer is implementing Cisco Intersight in a secure environment. The environment must use LDAP directory service and ensure information integrity and confidentiality. Which two steps must be taken to implement the solution? (Choose two.)
- A. Enable Encryption for LDAP
- B. Enable Certificate Signing Request in Cisco Intersight.
- C. Add a trusted OAuth token to Cisco Intersight
- D. Add a trusted root LDAP certificate to Cisco Intersight
- E. Add a self-signed LDAP certificate to Cisco Intersight.
Answer: A,D
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/Intersight/
b_Cisco_Intersight_Appliance_Getting_Started_Guide/
b_Cisco_Intersight_Appliance_Install_and_Upgrade_Guide_chapter_0110.html
NEW QUESTION 133
Refer to the exhibit.
Refer to the exhibit. Which action completes the vPC domain implementation?
- A. Allow VLANs on the vPC peer link member interfaces.
- B. Add the vPC member ports to the vPC channel group.
- C. Include the VRF management on the vPC domain.
- D. Configure the system MAC on the vPC domain.
Answer: B
NEW QUESTION 134
An engineer is asked to modify an overridden policy by changing the number of FCNS database entries to
1500 and then generate a message.
What Configuration will accomplish this task?
- A. event manager applet fcns_policy
event fcns entries max-per-switch 1500
action 1.0 syslog priority warnings msg FCNS DB entries have reached the EEM limit action 2.0 policy-default - B. event manager applet fcns_policy
action 1.0 syslog priority warnings msg FCNS DB entries have reached the EEM limit action 2.0 event-default - C. event manager applet fcns_policy override fcns_entries_max_per_switch event fcns entries max-per-switch 1500 action 1.0 syslog priority warnings msg FCNS DB entries have reached the EEM limit
- D. event manager applet fcns_policy override fcns_entries_max_per_switch action 1.0 syslog priority errors "CNS DB entries have reached the EEM limit" action 2.0 policy-default
Answer: C
NEW QUESTION 135 
Refer to the exhibit. What is the result of executing this python code?
- A. It sends a Cisco device backup to a remote destination.
- B. It sends the switch configuration to Cisco TAC.
- C. It schedules a backup on a Cisco switch using EEM.
- D. It backs up Cisco switches to Cisco Prime infrastructure.
Answer: A
NEW QUESTION 136
......
Pass Your CCNP Data Center 350-601 Exam on Oct 06, 2022 with 395 Questions: https://www.passreview.com/350-601_exam-braindumps.html
Latest Cisco 350-601 PDF and Dumps (2022) Free Exam Questions Answers: https://drive.google.com/open?id=1bFvW8q20SbrdpBzMNuvTcDVyWWtYAlzz