New 2022 Latest Questions 300-615 Dumps - Use Updated Cisco Exam
Latest 300-615 Exam Dumps Cisco Exam from Training Expert PassReview
Career Opportunities
Passing the Cisco 300-615 exam on the first try will help you get the specialist- and professional-level certificates as well as demonstrate to the current or future employer that you are a specialist in the data center solutions field and worthy of the desired position. Thus, the roles that you can choose from include a Data Center Engineering Telecom Manager, a Data Center Systems Administrator, an Infrastructure Manager, a Data Center Technician, and a Data Center VMware Engineer. If you are thinking about what income to expect, you can imagine a range of $39,000-145,000 per year, depending on your title.
NEW QUESTION 87
Refer to the exhibit.
An engineer troubleshoots the HSRP configuration and notes that the remote end uses HSRP version 1. The engineer sets the local HSRP to version 1, but the problem continues. Which action resolves the issue?
- A. Set the local group number as 300 in the remote data center configuration
- B. Run version 1 and version 2 HSRP on VLAN300 in the local data center.
- C. Reduce the priority of the local HSRP to below 100 to force the local HSRP to standby and then change the version to version 1.
- D. Change the local group number to 255 or less and request that the remote data center matches the group member in its configuration.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/xe-16/fhp-xe-16-book/fhp-hsrp-v2.pdf
NEW QUESTION 88
Refer to the exhibit.
The initiator that has FC ID 0x970102 fails to communicate with the target that has FC ID 0x970200. What action resolves the issue?
- A. Reset the port for FC ID 0x970209 and FC ID 0x9700c2 to log in to the fabric.
- B. Reset the port for FC ID 0x970102 and FC ID 0x970200 to log in to the fabric.
- C. Reactivate the zoneset.
- D. Reconfigure the initiator and the target to be in the same zones.
Answer: D
NEW QUESTION 89
Refer to the exhibit.
The HSRP configuration in the exhibit fails to function. Which action resolves this issue?
- A. Configure the same HSRP group on both devices.
- B. Enable IP redirects.
- C. Set the MTU to 1500 bytes.
- D. Configure HSRP version 2.
Answer: D
NEW QUESTION 90
Drag and drop the actions from the left onto the faults that they resolve on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION 91
Drag and drop the commands from the left onto the correct categories on the right.
Answer:
Explanation:
NEW QUESTION 92
Refer to the exhibit.
The connection between a Cisco Nexus 5548UP switch and a Cisco MDS switch fails to initialize. What is the cause of the issue?
- A. The SFP is unsupported.
- B. Trunk mode must be activated.
- C. The interface is in an incorrect mode.
- D. VSAN 1 is suspended.
Answer: D
NEW QUESTION 93
Refer to the exhibit.
The job fails to run. Which action resolves the issue?
- A. Add a start time to the script
- B. Configure an NTP server
- C. Enable the feature required
- D. Renew the feature license
Answer: A
NEW QUESTION 94
Refer to the exhibit.
An attempt to bind the Ethernet interface to vFC fails. Which action resolves the issue?
- A. Add the FCoE VLAN to the allowed VLAN list.
- B. Configure the FCoE VLAN that corresponds to the vFC VSAN as a private VLAN.
- C. Configure the interface as a trunk port.
- D. Configure the interface to use the native VLAN of the trunk port.
Answer: C
NEW QUESTION 95
Drag each item listed on the left to its proper category on the right Not all items will fit the categories.
Answer:
Explanation:
NEW QUESTION 96
Refer to the exhibit.
The EEM script is applied in the default VDC to collect the outputs during high CPU utilization on the Cisco Nexus 7000 Series Switch for all VDCs. Which configuration set must be added to the script to fix the issue?
- A. switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli config t switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
- B. switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli enable switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
- C. switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli enable switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
- D. switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli config t switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
Answer: C
Explanation:
Explanation
Need exact snap shot to confirm the following.
The selection of is due to
* SNMP command has the key word "oid".
* The command "switchto vdc Core" show run in "enable" mode, not "config t" mode.
NEW QUESTION 97
The external routes fail to propagate to leaf switches in Cisco ACI fabric. Which two actions resolve the issue?
(Choose two.)
- A. Assign an MP-BGP AS number to the fabric.
- B. Associate the correct contract to the L3Out.
- C. Enable the VTEP pool in the fabric.
- D. Configure an MP-BGP area.
- E. Specify the spine nodes as route reflectors.
Answer: A,E
Explanation:
Section: Network
NEW QUESTION 98
Refer to the exhibit.
A network engineer is implementing a pair of Cisco Nexus 9000 Series Switches. During the OSPF configuration, the engineer discovers unstable routing in the network. The investigation shows flapping routes after the new switches were introduced. Which set of actions resolves the issue?
- A. Configure a new IP address on the Loopback interface for the OSPF process. Clear the OSPF process
- B. Configure a new IP address on the Ethernet interface toward the OSPF neighbor. Clear the OSPF process.
- C. Configure a new OSPF priority on the Ethernet interface toward the OSPF neighbor. Clear the OSPF neighbor.
- D. Configure a new IP address on the Ethernet interface toward the OSPF neighbor. Clear the OSPF neighbor.
Answer: D
NEW QUESTION 99
Refer to the exhibit.
An engineer deploys SAN environment with two interconnected Cisco MDS 9000 Series switches. When the engineer attempts a zone merge, it fails with the error that is presented in the exhibit. Which action resolves the issue?
- A. Import or export a zone set between the switches to synchronize the switches.
- B. Set the distribute policy of the zone to full.
- C. Change the name of one of the zones to match the other zone set.
- D. Ensure that the zone members have different names.
Answer: A
Explanation:
Explanation
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/troubleshooting/guide/ts_guide.pd
NEW QUESTION 100 
Refer to the exhibit. An engineer discovered a VFC interface in a down state on a Cisco Nexus Switch. Which action resolves the problem?
- A. Change the cable between the switch and the server
- B. Reset the Cisco Nexus port toward the file server
- C. Modify the fip keepalive message time to 30 seconds
- D. Update the CNA firmware and driver versions
Answer: C
NEW QUESTION 101
The script fails to convert a JSON variable into a Python dictionary. Which action resolves the issue?
- A. Invoke a function yaml.loads(json._output ,decoder_"json")
- B. Define a json_output as a YAML object, yaml json_output
- C. Use a json.dumps(json_output) function
- D. Fix the JSON syntax by modifying "attribures" to "attribures":
Answer: C
NEW QUESTION 102
Refer to the exhibit.
vPC between switch1 and switch2 is not working. Which two actions are needed to fix the problem? (Choose two.)
- A. Configure one of the switches as primary for the vPC.
- B. Match vPC domain ID between the two devices.
- C. Configure vPC peer link and vPC peer keepalive correctly.
- D. Activate VLANs on the vPC.
- E. Configure IP address on the interface.
Answer: B,D
NEW QUESTION 103
Refer to the exhibit.
The EEM script fails to send an SNMP trap when a user attempts to enter configuration mode. Which configuration is missing from the script?
- A. event statement
- B. event-default action statement
- C. IP address of the SNMP server
- D. policy-default action statement
Answer: C
NEW QUESTION 104
Refer to the exhibit.
A network engineer is implementing a pair of Cisco Nexus 9000 Series Switches. During the OSPF configuration, the engineer discovers unstable routing in the network. The investigation shows flapping routes after the new switches were introduced. Which set of actions resolves the issue?
- A. Configure a new IP address on the Loopback interface for the OSPF process. Clear the OSPF process
- B. Configure a new IP address on the Ethernet interface toward the OSPF neighbor. Clear the OSPF process.
- C. Configure a new OSPF priority on the Ethernet interface toward the OSPF neighbor. Clear the OSPF neighbor.
- D. Configure a new IP address on the Ethernet interface toward the OSPF neighbor. Clear the OSPF neighbor.
Answer: D
NEW QUESTION 105 
Refer to the exhibit. An upgrade operation fails with an error displayed. Which action resolves the issue?
- A. Allocate extra space on a flash drive to extract a kickstart image.
- B. Use a different kickstart image.
- C. Use a different system image.
- D. Allocate extra space on a flash drive to extract a system image.
Answer: C
Explanation:
Section: Management and Operations
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_1_4_a/ troubleshooting/configuration/guide/n1000v_trouble/n1000v_trouble_5upgrade.html
NEW QUESTION 106
Refer to the exhibit A network administrator must provide Bash shell access to the support team for all of the Cisco Nexus 9000 Series Switches. The newly created user that is named "bashusers" fails to access the Bash shell. Which action resolves the issue?
- A. Associate bashusers with the Cisco NX-OS network-operator role and activate the bash-shell feature.
- B. Associate bashusers with the Cisco NX-OS dev-ops role and activate the bash-shell feature.
- C. Associate bashusers with the Cisco NX-OS network-admin role and activate the guestshell feature.
- D. Associate bashusers with the Cisco NX-OS vdc-admin role and activate the nxapi feature.
Answer: B
NEW QUESTION 107
Refer to the exhibit.
An upgrade operation fails with an error displayed. Which action resolve the issue?
- A. Use a different system image
- B. Use a different kickstart image
- C. Allocate extra space on a flash drive to extract a kickstart image
- D. Allocate extra space on a flash drive to extract a system image
Answer: A
Explanation:
Kickstart image verification succeeded. System image has failed.
NEW QUESTION 108 
Refer to the exhibit. An engineer is troubleshooting why user1, user2, and user3 from group STORAGE- ADMINISTRATOR in Microsoft Active Directory cannot log in to the Cisco MDS SSH CLI. Which action resolves the issue?
- A. Integrate Cisco MDS with Microsoft Active Directory.
- B. Configure SSH logins on Cisco MDS switch.
- C. Configure the role name to match the group name on Microsoft Active Directory.
- D. Include specific users into MDS role configuration.
Answer: C
Explanation:
Section: Storage Network
Explanation
NEW QUESTION 109
Refer to the exhibit.
A network engineer has connected the Nexus switch management port to the Internet using DHCP to allow the Guest shell running on the switch to download Python packages. The engineer can ping google.com successfully from the Nexus switch, but the Guest shell failed to download any Python packages. Which action resolves the problem?
- A. Connect Guest shell to data plane interfaces to be able to connect to the networks outside the Cisco Nexus switch.
- B. Manually configure NTP in the Guest shell.
- C. Update the Python packages on the Cisco Nexus switch directly.
- D. Manually configure DNS in the Guest shell, even if it is claimed on the Cisco Nexus switch through DHCP.
Answer: D
NEW QUESTION 110
Refer to the exhibit.
A network engineer configures OSPF protocol between two Cisco Nexus 7000 Series Switches. The OSPF neighbors fail to synchronize OSPF databases. Which action resolves the issue?
- A. Match the OSPF area between the two devices.
- B. Set the same MTU values on both sides of the link.
- C. Configure the IP addresses of the interface in the same subnet.
- D. Change the OSPF area type to 2 on n7k-1.
Answer: B
NEW QUESTION 111
Refer to the exhibit.
An engineer discovers that if the vPC peer link goes down, half of the devices in VLAN 20 experience connectivity issues with the external networks Which action resolves the issue?
- A. Configure a dedicated Layer 3 link between vPC peers
- B. Add the non-vPC SVIs in the dual-active exclude VLAN list
- C. Allow non-vPC VLANs on a second trunk between the two vPC peers
- D. Exclude the non-vPC VLANs from vPC peer link
Answer: B
NEW QUESTION 112
......
Updated Test Engine to Practice 300-615 Dumps & Practice Exam: https://www.passreview.com/300-615_exam-braindumps.html
Pass Cisco 300-615 PDF Dumps Recently Updated 150 Questions: https://drive.google.com/open?id=1ziXExoB1pVk5oRnbfFcTZ0zm6HDChlIY