Most UptoDate Huawei H35-561-ENU Exam Dumps PDF 2022 [Q30-Q52]

Share

Most UptoDate Huawei H35-561-ENU Exam Dumps PDF 2022

100% Free HCNP-LTE RNP & RNO H35-561-ENU Dumps PDF Demo Cert Guide Cover

NEW QUESTION 30
Which of the following events can trigger a heterogeneous system mobility process? (Multiple Choice)

  • A. A4
  • B. A5
  • C. B2
  • D. B1

Answer: C,D

 

NEW QUESTION 31
Which system carries the cell reselection control parameters of the 2G network in the LTE system?

  • A. SIB7
  • B. SIB5
  • C. SIB8
  • D. SIB6

Answer: A

 

NEW QUESTION 32
How many LTE physical cell identifiers (PCI) are there?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

 

NEW QUESTION 33
Management Logfile in the "Combine" function, more Logfile file can be merged into a Logfile file.

  • A. True
  • B. False

Answer: A

 

NEW QUESTION 34
If the cell selection minimum set access level set by the base station side is -120dBm, the minimum access level value is offset to 0dB, the maximum allowable transmit power of the UE is 24dBm, and the maximum transmit power of the terminal is 23dBm, regardless of RSRQ, then the terminal signal the strength should be greater than -115dBm to camp on the cell.

  • A. False
  • B. True

Answer: A

 

NEW QUESTION 35
Measuring GAP is the time period of measuring the UE leave the current frequency point to other frequency points.

  • A. True
  • B. False

Answer: A

 

NEW QUESTION 36
Regarding the peak rate and antenna settings of the LTE system, which of the following is correct?

  • A. The uplink peak rate indicator needs to be met when the UE is configured with 1 receiving antennas.
  • B. The downlink peak rate indicator needs to be met when the base station is configured with 2 receiving antennas.
  • C. The downlink peak rate indicator needs to be met when the UE is configured with 2 receiving antennas.
  • D. The uplink peak rate indicator needs to be met when the base station is configured with 1 receiving antennas.

Answer: A

 

NEW QUESTION 37
PDCCH/ePDCCH is used to transmit DCI (Downlink Control Information). Which of the following information does the DCI include?

  • A. Uplink authorization
  • B. Power Control Command
  • C. Scheduling strategy
  • D. Downlink authorization

Answer: A,B,C,D

 

NEW QUESTION 38
What technologies are included in Massive MIMO? (Multiple choice)

  • A. MU-BF
  • B. Uplink receive diversity
  • C. 3D-BF
  • D. Uplink MU-MIMO

Answer: A,B,C,D

 

NEW QUESTION 39
Which of the following command can query the model and supported band of RRU?

  • A. DSP BRD
  • B. DSP RRU
  • C. DSP BRDMFRINFO
  • D. LST RRU

Answer: C

 

NEW QUESTION 40
Which of the following is the RLC layer for data processing in the LTE system protocol?

  • A. Compressed encryption
  • B. Mapping
  • C. Modulation
  • D. Segmentation

Answer: D

 

NEW QUESTION 41
Regarding the peak rate and antenna settings of the LTE system, which of the following is correct?

  • A. The uplink peak rate indicator needs to be met when the UE is configured with 1 receiving antennas.
  • B. The downlink peak rate indicator needs to be met when the base station is configured with 2 receiving antennas.
  • C. The downlink peak rate indicator needs to be met when the UE is configured with 2 receiving antennas.
  • D. The uplink peak rate indicator needs to be met when the base station is configured with 1 receiving antennas.

Answer: A

 

NEW QUESTION 42
In the LTE system, which is the advantage of applying 64QAM compared to 16QAM?

  • A. Simpler implementation
  • B. Improved anti-noise, anti-fading ability
  • C. Improved spectrum utilization
  • D. Reduce the system error rate

Answer: C

 

NEW QUESTION 43
In the LTE system, which of the following options are DCI coding processes? (Multiple Choice)

  • A. Code block cascading
  • B. Rate matching
  • C. Channel coding
  • D. Information unit multiplexing
  • E. CRC addition

Answer: B,C,D,E

 

NEW QUESTION 44
What are the differences between FDD-LTE and TDD-LTE? (Multiple Choice)

  • A. Voice solution
  • B. Random access preamble format
  • C. Reference signal
  • D. Sub-frame uplink and downlink configuration

Answer: B,C,D

 

NEW QUESTION 45
What are the advantages of narrowband Internet of Things over other technologies? (Multiple Choice)

  • A. Low power consumption
  • B. Coverage enhancement
  • C. Low cost
  • D. Large connection

Answer: A,B,C,D

 

NEW QUESTION 46
Which information has been re-acquired after the service request is successful?

  • A. Reconstructed SGs
  • B. Reconstructed S1-C
  • C. Authentication code
  • D. Updated TAL

Answer: D

 

NEW QUESTION 47
In the LTE system, which of the following criteria is used for cell selection?

  • A. Srxlev> 0, and Squal> 0
  • B. Srxley >0
  • C. Srxlev >0 or Squal >0
  • D. Squal >0

Answer: A

 

NEW QUESTION 48
Regarding the scheduler, what are the correct descriptions of the following?

  • A. The semi-static scheduling resource configured by the PDCCH is required to be dynamically scheduled to ensure the quality of the service before the resource is released.
  • B. The uplink can support TTIBLUNDLING, and several bound TTIs are processed as the same resource to obtain the uplink HARQ combining gain.
  • C. The semi-static scheduling is mainly used for VoIP services. Considering that VoIP services have high delay requirements, although they belong to data scheduling, they have higher priority than broadcast and paging.
  • D. Different types of traffic carried bases on PDSCH, scheduling mode can be devided into the semi-static and dynamic scheduling on PDSCH.

Answer: A

 

NEW QUESTION 49
How long is the TTI of the MIB (master information block)?

  • A. 40ms
  • B. 80ms
  • C. 10ms
  • D. 1ms

Answer: A

 

NEW QUESTION 50
Which is the wrong descriptions of LTE signal quality?

  • A. The MCS value is assigned by the MME and indicates the quality of the Uu interface.
  • B. The higher the CQI value, the better the signal quality.
  • C. The higher the average value of CQI, the better the signal quality
  • D. UE can report the quality of each PRB alone

Answer: A,B,D

 

NEW QUESTION 51
The UE is in the out-of-step state. If there is downlink data service, how is the UE 's random access procedure handled?

  • A. Randomly select the contention sequence through the UE PDCP layer
  • B. Notifying the UE through the RRC reconfiguration message
  • C. Notifying the UE through the PDCCH Order
  • D. Randomly select the contention sequence through the UE MAC layer

Answer: B

 

NEW QUESTION 52
......

Updated Huawei H35-561-ENU Dumps – PDF & Online Engine: https://www.passreview.com/H35-561-ENU_exam-braindumps.html