Latest Fortinet NSE7_LED-7.0 Practice Test Questions, Fortinet NSE 7 - LAN Edge 7.0 Exam Dumps [Q14-Q39]

Latest Fortinet NSE7_LED-7.0 Practice Test Questions, Fortinet NSE 7 - LAN Edge 7.0 Exam Dumps

Nov-2024 Pass Fortinet NSE7_LED-7.0 Exam in First Attempt Easily

Fortinet NSE7_LED-7.0 (Fortinet NSE 7 - LAN Edge 7.0) Exam is a certification exam that validates the skills and knowledge of network security professionals in designing, configuring, and managing Fortinet solutions for LAN Edge environments. NSE7_LED-7.0 exam covers topics such as advanced FortiGate features, FortiManager and FortiAnalyzer, FortiSwitch, FortiAP, and FortiNAC. It is a comprehensive exam that provides a thorough understanding of Fortinet's LAN Edge products and their application in real-world scenarios.

NEW QUESTION # 14
Refer to the exhibit.

Examine the RADIUS server configuration shown in the exhibit
An administrator has configured a RADIUS server on FortiGate that points to FortiAuthenticator FortiAuthenticator is acting as an authentication proxy and is configured to relay all authentication requests to a remote Windows AD server using LDAP While testing the configuration the administrator noticed that the diagnosetest authserver command worked with PAP, however authentication requests failed when using MSCHAP2 Which two solutions can the administrator implement to get MSCHAP2 authentication to work'' (Choose two.)

A. On FortiGate configure the NAS IP setting on the RADIUS
server
B. On FortiGate update the Secret setting on the RADIUS server
C. On FortiAuthenticator change the back-end authentication server from LDAP to RADIUS
D. On FortiAuthenticator enable Windows Active Directory Domain Authentication to add FortiAuthenticator to the Windows domain

Answer: C,D

Explanation:
Explanation
According to the exhibit, the RADIUS server configuration on FortiGate points to FortiAuthenticator, which is acting as an authentication proxy and is configured to relay all authentication requests to a remote Windows AD server using LDAP. However, LDAP does not support MSCHAP2 authentication, which is required for RADIUS. Therefore, option A is true because on FortiAuthenticator, enabling Windows Active Directory Domain Authentication will add FortiAuthenticator to the Windows domain and allow it to use MSCHAP2 authentication with the AD server. Option C is also true because on FortiAuthenticator, changing the back-end authentication server from LDAP to RADIUS will allow it to use MSCHAP2 authentication with the AD server. Option B is false because on FortiGate, configuring the NAS IP setting on the RADIUS server will not affect the MSCHAP2 authentication, but rather the source IP address of the RADIUS packets. Option D is false because on FortiGate, updating the Secret setting on the RADIUS server will not affect the MSCHAP2 authentication, but rather the shared secret between FortiGate and FortiAuthenticator.

NEW QUESTION # 15
Refer to the exhibit. Examine the sections of the configuration shown in the output.
What action will FortiGate take when verifying the student certificate through OCSP?

A. Not verify the OCSP server certificate
B. Reject the student certificate if the OCSP server replies that the student certificate status is unknown
C. Consider the student certificate status as valid if the OCSP server is unreachable
D. Use the OCSP URL included in the student certificate to verify the student certificate

Answer: B

Explanation:

NEW QUESTION # 16
Refer to the exhibit.

Examine the FortiManager information shown in the exhibit
Which two statements about the FortiManager status are true'' (Choose two)

A. FortiSwitch is not authorized
B. FortiSwitch manager is working in per-device management mode
C. FortiSwitch is authorized and offline
D. FortiSwitch manager is working in central management mode

Answer: C,D

Explanation:
Explanation
According to the FortiManager Administration Guide, "Central management mode allows you to manage all FortiSwitch devices from a single interface on the FortiManager device." Therefore, option C is true because the exhibit shows that the FortiSwitch manager is enabled and the FortiSwitch device is managed by the FortiManager device. Option D is also true because the exhibit shows that the FortiSwitch device status is offline, which means that it is not reachable by the FortiManager device, but it is authorized, which means that it has been added to the FortiManager device. Option A is false because per-device management mode allows you to manage each FortiSwitch device individually from its own web-based manager or CLI, which is not the case in the exhibit. Option B is false because the FortiSwitch device is authorized, as explained above.

NEW QUESTION # 17
Refer to the exhibit.

Examine the LDAP server configuration shown in the exhibit Note that the Username setting has been expanded to display Its full content On the Windows AD server 10.0.1.10, the administrator used dsquery. which returned the following output:

According to the output which FortiGate LDAP setting is configured incorrectly''

A. Bind Type
B. Distinguished Name
C. Username
D. Common Name Identifier

Answer: B

Explanation:
Explanation
According to the exhibits, the LDAP server configuration on FortiGate has the Distinguished Name set to
"dc=training,dc=lab". However, according to the output of the dsquery command on the Windows AD server, the Distinguished Name of the domain should be "dc=trainingAD,dc=training,dc=lab". Therefore, option C is true because the Distinguished Name on FortiGate is configured incorrectly and does not match the actual Distinguished Name of the domain. Option A is false because the Common Name Identifier on FortiGate is configured correctly as "cn". Option B is false because the Bind Type on FortiGate is configured correctly as
"Regular". Option D is false because the Username on FortiGate is configured correctly as
"cn=admin,cn=users,dc=trainingAD,dc=training,dc=lab".

NEW QUESTION # 18
Refer to the exhibit. A device connected to port2 on FortiSwitch cannot access the network. The port is assigned a security policy to enforce 802.1X authentication. While troubleshooting the issue, the administrator obtains the debug output shown in the exhibit.
Which two scenarios are likely to cause this issue? (Choose two.)

A. The device is not configured for 802.1X authentication.
B. The device has been quarantined for 3600 seconds.
C. The device has been assigned the guest VLAN.
D. The device does not support 802.1X authentication.

Answer: A,D

Explanation:
According to the exhibit, the debug output shows that the device connected to port2 on FortiSwitch is sending an EAPOL-Start message, which is the first step of the 802.1X authentication process. However, the output also shows that the device is not sending any EAP- Response messages, which are required to complete the authentication process. Therefore, option A is true because the device is not configured for 802.1X authentication, which means that it does not have the correct credentials or settings to authenticate with the RADIUS server.
Option D is also true because the device does not support 802.1X authentication, which means that it does not have the capability or software to perform 802.1X authentication.

NEW QUESTION # 19
Refer to the exhibit. Examine the FortiManager configuration and FortiGate CLI output shown in the exhibit.
An administrator is testing the NAC feature. The test device is connected to a managed FortiSwitch device (S224EPTF19005867) on port2.
After applying the NAC policy on port2 and generating traffic on the test device, the test device is not matching the NAC policy; therefore, the test device remains in the onboarding VLAN.
Based on the information shown in the exhibit, which two scenarios are likely to cause this issue?
(Choose two.)

A. The device operating system detected by FortiGate is not Linux
B. The MAC address configured on the NAC policy is incorrect
C. Management communication between FortiGate and FortiSwitch is down
D. Device detection is not enabled on VLAN 4089

Answer: A,B

Explanation:
https://docs.fortinet.com/document/fortiswitch/7.4.2/fortilink-guide/173271/fortiswitch-network- access-control

NEW QUESTION # 20
You are investigating a report of poor wireless performance in a network that you manage. The issue is related to an AP interface in the 5 GHz range You are monitoring the channel utilization over time.
What is the recommended maximum utilization value that an interface should not exceed?

A. 65%
B. 95%
C. 85%
D. 75%

Answer: A

Explanation:
Explanation
According to the FortiAP Configuration Guide, "Channel utilization measures how busy a channel is over a given period of time. It includes both Wi-Fi and non-Wi-Fi interference sources. A high channel utilization indicates a congested channel and can result in poor wireless performance. The recommended maximum utilization value that an interface should not exceed is 65%." Therefore, option D is true because it gives the recommended maximum utilization value for an interface in the 5 GHz range. Options A, B, and C are false because they give higher utilization values that can cause poor wireless performance.
https://docs.fortinet.com/document/fortiap/7.0.0/configuration-guide/734537/wireless-radio-settings#channel-uti

NEW QUESTION # 21
Refer to the exhibit.

Examine the FortiSwitch security policy shown in the exhibit
If the security profile shown in the exhibit is assigned to all ports on a FortiSwitch device for 802 1X authentication which statement about the switch is correct?

A. FortiSwitch will try to authenticate non-802 1X devices using the device MAC address as the username and password
B. FortiSwitch cannot authenticate multiple devices connected to the same port
C. All EAP messages will be terminated on FortiSwitch
D. FortiSwitch will assign non-802 1X devices to the onboarding VLAN

Answer: D

Explanation:
Explanation
According to the FortiSwitch Administration Guide, "If a device does not support 802.1X authentication, you can configure the switch to assign the device to an onboarding VLAN. The onboarding VLAN is a separate VLAN that you can use to provide limited network access to non-802.1X devices." Therefore, option C is true because it describes the behavior of FortiSwitch when the security profile shown in the exhibit is assigned to all ports. Option A is false because FortiSwitch can authenticate multiple devices connected to the same port using MAC-based or MAB-EAP modes. Option B is false because FortiSwitch will not try to authenticate non-802.1X devices using the device MAC address as the username and password, but rather use MAC authentication bypass (MAB) or EAP pass-through modes. Option D is false because all EAP messages will be terminated on FortiGate, not FortiSwitch, when using 802.1X authentication.

NEW QUESTION # 22
You are configuring a FortiGate wireless network to support automated wireless client quarantine using IOC. Which two configurations must you put in place for a wireless client to be quarantined successfully? (Choose two)

A. Configure the FortiGate device in the Security Fabric with a FortiAnalyzer device
B. Configure the wireless network to be in tunnel mode
C. Configure a firewall policy to allow communication
D. Configure the wireless network to be in bridge mode

Answer: A,B

NEW QUESTION # 23
Refer to the exhibit.

Examine the network diagram and packet capture shown in the exhibit
The packet capture was taken between FortiGate and FortiAuthenticator and shows a RADIUS Access-Request packet sent by FortiSwitch to FortiAuthenticator through FortiGate Why does the User-Name attribute in the RADIUS Access-Request packet contain the client MAC address?

A. FortiSwitch is sending a RADIUS accounting message to FortiAuthenticator
B. The client is performing AD machine authentication
C. FortiSwitch is authenticating the client using MAC authentication bypass
D. The client is performing user authentication

Answer: C

Explanation:
Explanation
According to the exhibit, the User-Name attribute in the RADIUS Access-Request packet contains the client MAC address of 00:0c:29:6a:2b:3d. This indicates that FortiSwitch is authenticating the client using MAC authentication bypass (MAB), which is a method of authenticating devices that do not support 802.1X by using their MAC address as the username and password. Therefore, option B is true because it explains why the User-Name attribute contains the client MAC address. Option A is false because AD machine authentication uses a computer account name and password, not a MAC address. Option C is false because user authentication uses a user name and password, not a MAC address. Option D is false because FortiSwitch is sending a RADIUS Access-Request message to FortiAuthenticator, not a RADIUS accounting message.

NEW QUESTION # 24
Which EAP method requires the use of a digital certificate on both the server end and the client end?

A. EAP-TLS
B. EAP-TTLS
C. EAP-GTC
D. PEAP

Answer: A

Explanation:
Explanation
According to the FortiGate Administration Guide, "EAP-TLS is the most secure EAP method. It requires a digital certificate on both the server end and the client end. The server and client authenticate each other using their certificates." Therefore, option D is true because it describes the EAP method that requires the use of a digital certificate on both the server end and the client end. Option A is false because EAP-TTLS only requires a digital certificate on the server end, not the client end. Option B is false because PEAP also only requires a digital certificate on the server end, not the client end. Option C is false because EAP-GTC does not require a digital certificate on either the server end or the client end.

NEW QUESTION # 25
A wireless network in a school provides guest access using a captive portal to allow unregistered users to self-register and access the network. The administrator is requested to update the existing configuration to provide captive portal authentication through a secure connection (HTTPS).
Which two changes must the administrator make to enforce HTTPS authentication? (Choose two)

A. Create a new SSID with the HTTPS captive portal URL
B. Disable HTTP administrative access on the guest SSID to enforce HTTPS connection
C. Enable HTTP redirect in the user authentication settings
D. Update the captive portal URL to use HTTPS on FortiGate and FortiAuthenticator

Answer: C,D

Explanation:
To enable HTTPS authentication, you must enable HTTP redirect in the user authentication settings. This redirects HTTP requests to HTTPS. You must also update the captive portal URL to use HTTPS on both FortiGate and FortiAuthenticator.

NEW QUESTION # 26
Refer to the exhibits.

Examine the firewall policy configuration and SSID settings. An administrator has configured a guest wireless network on FortiGate using the external captive portal. The administrator has verified that the external captive portal URL is correct. However wireless users are not able to see the captive portal login page. Given the configuration shown in the exhibit and the SSID settings, which configuration change should the administrator make to fix the problem?

A. Disable the user group from the SSID configuration.
B. Include the wireless client subnet range in the Exempt Source section.
C. Apply a guest.portal user group in the firewall policy with the ID 11.
D. Enable the captive-portal-exempt option in the firewall policy with the ID 11.

Answer: D

Explanation:
If using external captive portal configure policy and exempt web traffic to external captive portal.

NEW QUESTION # 27
An administrator is testing the connectivity for a new VLAN The devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate Quarantine is disabled on FortiGate While testing the administrator noticed that devices can ping FortiGate and FortiGate can ping the devices The administrator also noticed that inter-VLAN communication works However intra-VLAN communication does not work Which scenario is likely to cause this issue?

A. Access VLAN is enabled on the VLAN
B. The native VLAN configured on the ports is incorrect
C. The FortiGate ARP table is missing entries
D. The FortiSwitch MAC address table is missing entries

Answer: D

Explanation:
Explanation
According to the scenario, the devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate. Quarantine is disabled on FortiGate, which means that the devices are not blocked by any security policy. The devices can ping FortiGate and FortiGate can ping the devices, which means that the IP connectivity is working. Inter-VLAN communication works, which means that the routing between VLANs is working. However, intra-VLAN communication does not work, which means that the switching within the VLAN is not working. Therefore, option C is true because the FortiSwitch MAC address table is missing entries, which means that the FortiSwitch does not know how to forward frames to the destination MAC addresses within the VLAN. Option A is false because access VLAN is enabled on the VLAN, which means that the VLAN ID is added to the frames on ingress and removed on egress. This does not affect intra-VLAN communication. Option B is false because the native VLAN configured on the ports is incorrect, which means that the frames on the native VLAN are not tagged with a VLAN ID. This does not affect intra-VLAN communication. Option D is false because the FortiGate ARP table is missing entries, which means that FortiGate does not know how to map IP addresses to MAC addresses. This does not affect intra-VLAN communication.

NEW QUESTION # 28
Refer to the exhibit

A device connected to port2 on FortiSwitch cannot access the network The port is assigned a security policy to enforce 802 1X authentication While troubleshooting the issue, the administrator obtains the debug output shown in the exhibit Which two scenarios are likely to cause this issue? (Choose two.)

A. The device is not configured for 802 IX authentication.
B. The device has been assigned the guest VLAN
C. The device has been quarantined for 3600 seconds.
D. The device does not support 802 1X authentication

Answer: A,D

Explanation:
Explanation
According to the exhibit, the debug output shows that the device connected to port2 on FortiSwitch is sending an EAPOL-Start message, which is the first step of the 802.1X authentication process. However, the output also shows that the device is not sending any EAP-Response messages, which are required to complete the authentication process. Therefore, option A is true because the device is not configured for 802.1X authentication, which means that it does not have the correct credentials or settings to authenticate with the RADIUS server. Option D is also true because the device does not support 802.1X authentication, which means that it does not have the capability or software to perform 802.1X authentication. Option B is false because the device has not been quarantined for 3600 seconds, but rather has a session timeout of 3600 seconds, which is the default value for 802.1X sessions. Option C is false because the device has not been assigned the guest VLAN, but rather has been assigned the default VLAN, which is VLAN 1.

NEW QUESTION # 29
An administrator is testing the connectivity for a new VLAN The devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate Quarantine is disabled on FortiGate While testing the administrator noticed that devices can ping FortiGate and FortiGate can ping the devices The administrator also noticed that inter-VLAN communication works However intra-VLAN communication does not work Which scenario is likely to cause this issue?

A. Access VLAN is enabled on the VLAN
B. The native VLAN configured on the ports is incorrect
C. The FortiGate ARP table is missing entries
D. The FortiSwitch MAC address table is missing entries

Answer: D

NEW QUESTION # 30
When you configure a FortiAP wireless interface for auto TX power control which statement describes how it configures its transmission power"?

A. Every 30 seconds FortiGate measures the signal strength of adjacent AP interfaces It will adjust its own AP power to match the adjacent AP signal strength
B. Every 30 seconds the AP will measure the signal strength of the AP using the client The AP will adjust its signal strength up or down until the AP signal is detected at -70 dBm
C. Every 30 seconds FortiGate measures the signal strength of the weakest associated client The AP will then configure its radio power to match the detected signal strength of the client
D. Every 30 seconds FortiGate measures the signal strength of adjacent FortiAP interfaces It will adjust the adjacent AP power to be detectable at -70 dBm

Answer: B

Explanation:
Explanation
According to the FortiAP Configuration Guide1, "Auto TX power control allows the AP to adjust its transmit power based on the signal strength of the client. The AP will measure the signal strength of the client every 30 seconds and adjust its transmit power up or down until the client signal is detected at -70 dBm." Therefore, option A is true because it describes how the FortiAP wireless interface configures its transmission power when auto TX power control is enabled. Option B is false because FortiGate does not measure the signal strength of adjacent AP interfaces, but rather the FortiAP does. Option C is false because FortiGate does not adjust the adjacent AP power, but rather the FortiAP adjusts its own power. Option D is false becauseFortiGate does not measure the signal strength of the weakest associated client, but rather the FortiAP does.

NEW QUESTION # 31
Which two statements about the guest portal on FortiAuthenticator are true? (Choose two.)

A. Administrators can use one or more incoming parameters to configure a mapping rule for the guest portal
B. Administrators must approve all guest accounts before they can be used
C. Each remote user on FortiAuthenticator can sponsor up to 10 guest accounts
D. The guest portal provides pre and post-log in services

Answer: A,D

Explanation:
The guest portal on FortiAuthenticator can offer services both before and after a guest logs in, such as displaying terms of use before login and providing access to network resources after successful authentication.
Administrators have the ability to configure mapping rules for the guest portal using various incoming parameters. This allows for flexible and dynamic handling of guest account creation and access permissions based on different criteria.

NEW QUESTION # 32
You are investigating a report of poor wireless performance in a network that you manage. The issue is related to an AP interface in the 5 GHz range. You are monitoring the channel utilization over time.
What is the recommended maximum utilization value that an interface should not exceed?

A. 65%
B. 95%
C. 85%
D. 75%

Answer: D

Explanation:

NEW QUESTION # 33
Which two statements about FortiSwitch manager are true? (Choose two)

A. Any switch discovered or authorized on FortiGate must be added manually on FortiSwitch manager
B. If the administrator makes any changes on FortiSwitch manager they must also install those changes on FortiGate so that those changes are applied on the managed switches
C. FortiManager obtains the FortiSwitch status information by querying the FortiGate REST API every three minutes
D. Per-device management is the default management mode on FortiManager

Answer: B,C

Explanation:
According to the FortiManager Administration Guide, "FortiManager obtains the FortiSwitch status information by querying the FortiGate REST API every three minutes." Therefore, option B is true because it describes how FortiManager gets the information about the managed switches.
According to the same guide2, "If you make any changes in this module, you must install them on your managed device so that they are applied on your managed switches." Therefore, option C is true because it describes what the administrator must do after making any changes on FortiSwitch manager. Option A is false because central management is the default management mode on FortiManager, not per-device management. Option D is false because any switch discovered or authorized on FortiGate will be automatically added on FortiSwitch manager, not manually.

NEW QUESTION # 34
Refer to the exhibit. Examine the LDAP server configuration shown in the exhibit. Note that the Username setting has been expanded to display its full content.
On the Windows AD server 10.0.1.10, the administrator used dsquery, which returned the following output:
>dsquery user -samid student
"CN=student,CN=Users,DC=trainingAD,DC=training,DC=lab"
According to the output, which FortiGate LDAP setting is configured incorrectly?

A. Bind Type
B. Distinguished Name
C. Username
D. Common Name Identifier

Answer: B

Explanation:
According to the exhibits, the LDAP server configuration on FortiGate has the Distinguished Name set to "dc=training,dc=lab". However, according to the output of the dsquery command on the Windows AD server, the Distinguished Name of the domain should be
"dc=trainingAD,dc=training,dc=lab".

NEW QUESTION # 35
Which two statements about MAC address quarantine by redirect mode are true? (Choose two)

A. It is the default mode for MAC address quarantine
B. The device MACaddress is added to the Quarantined Devices firewall address group
C. The quarantined device is kept in the current VLAN
D. The quarantined device is moved to the quarantine VLAN

Answer: B,C

Explanation:
Explanation
According to the FortiGate Administration Guide, "MAC address quarantine by redirect mode allows you to quarantine devices by adding their MAC addresses to a firewall address group called Quarantined Devices.
The quarantined devices are kept in their current VLANs, but their traffic is redirected to a quarantine portal." Therefore, options B and D are true because they describe the statements about MAC address quarantine by redirect mode. Option A is false because the quarantined device is not moved to the quarantine VLAN, but rather kept in the current VLAN. Option C is false because redirect mode is not the default mode for MAC address quarantine, but rather an alternative mode that can be enabled by setting mac-quarantine-mode to redirect.
https://docs.fortinet.com/document/fortiap/7.0.0/configuration-guide/734537/radius-authenticated-dynamic-vlan-: https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/734537/mac-address-quarantine

NEW QUESTION # 36
Where can FortiGate learn the FortiManager IP address or FQDN for zero-touch provisioning'?

A. From a DHCP server using options 240 and 241
B. From a TFTP server
C. From a DNS server using A or AAAA records
D. From an LDAP server using a simple bind operation

Answer: C

Explanation:
Explanation
According to the FortiGate Administration Guide, "FortiGate can learn the FortiManager IP address or FQDN for zero-touch provisioning from a DNS server using A or AAAA records. The DNS server must be configured to resolve the hostname fortimanager.fortinet.com to the IP address or FQDN of the FortiManager device." Therefore, option D is true because it describes the method for FortiGate to learn the FortiManager IP address or FQDN for zero-touch provisioning. Option A is false because LDAP is not used for zero-touch provisioning. Option B is false because TFTP is not used for zero-touch provisioning. Option C is false because DHCP options 240 and 241 are not used for zero-touch provisioning.

NEW QUESTION # 37
Refer to the exhibits

The exhibits show the wireless network (VAP) SSID profiles defined on FortiManager and an AP profile assigned to a group of APs that are supported by FortiGate None of the APs are broadcasting the SSlDs defined by the AP profile Which changes do you need to make to enable the SSIDs to broadcast?

A. Enable multiple channels in the Channels section and enable Radio Resource Provision
B. In the SSIDs section enable Tunnel
C. Enable one channel in the Channels section
D. In the SSIDs section enable Manual and assign the networks manually

Answer: C

Explanation:
Explanation
According to the FortiManager Administration Guide1, "To enable the SSID, you must select at least one channel for the radio. If no channels are selected, the SSID will not be enabled." Therefore, enabling one channel in the Channels section will allow the SSIDs to broadcast.

NEW QUESTION # 38
Refer to the exhibit. Examine the FortiGate user group configuration and the Windows AD LDAP group membership information shown in the exhibit.
FortiGate is configured to authenticate SSL VPN users against Windows AD using LDAP. The administrator configured the SSL VPN user group for SSL VPN users. However the administrator noticed that both the student and j.smith users can connect to SSL VPN.
Which change can the administrator make on FortiGate to restrict the SSL VPN service to the student user only?

A. In the SSL VPN user group configuration, set Group Name to
CN=SSLVPN,CN=Users,DC=trainingAD,DC=training,DC=lab.
B. In the SSL VPN user group configuration, change Name to
CN=SSLVPN,CN=Users,DC=trainingAD,DC=training,DC=lab.
C. In the SSL VPN user group configuration, set Group Name to CN=Domain Users,CN=Users,DC=trainingAD,DC=training,DC=lab.
D. In the SSL VPN user group configuration, change Type to Fortinet Single Sign-On (FSSO).

Answer: A

Explanation:
The Group Name is the name of the LDAP group that you want to use for authentication. The name must match exactly the name of the LDAP group on the LDAP server.

NEW QUESTION # 39
......

Passing the NSE7_LED-7.0 exam requires a deep understanding of Fortinet solutions and network security concepts. Candidates must be able to analyze network traffic and identify security threats, as well as configure and manage Fortinet solutions to mitigate these threats. Successful candidates will have the skills and knowledge to design and implement LAN edge security solutions that meet the requirements of modern businesses.

Free NSE7_LED-7.0 Exam Files Downloaded Instantly 100% Dumps & Practice Exam: https://www.passreview.com/NSE7_LED-7.0_exam-braindumps.html

Updated Verified NSE7_LED-7.0 dumps Q&As - 100% Pass Guaranteed: https://drive.google.com/open?id=1SH-ULtqEwJ0rzsYbYpvnEaXwKLtsSv-v

Latest Fortinet NSE7_LED-7.0 Practice Test Questions, Fortinet NSE 7 - LAN Edge 7.0 Exam Dumps [Q14-Q39]

Related Articles