GET Real HP HPE7-V01 Exam Questions With 100% Refund Guarantee Jul 29, 2026
Get Special Discount Offer on HPE7-V01 Dumps PDF
NEW QUESTION # 19
Your customer is considering HPE Alletra 6000 or HPE Alletra Storage MP B10000 for use in a Peer Persistence enabled platform for their critical workloads.
Which statement about these platforms and their benefits is true for Peer Persistence?
- A. With Alletra 6000 your customer will be able to use Active Peer Persistence to protect workloads running on VMware.
- B. With HPE Alletra Storage MP B10000 your customer will be able to configure an Active Peer Persistence wizard with a one-to-many topology.
- C. With HPE Alletra Storage MP B10000 your customer will be able to use Peer Persistence to protect workloads running on VMware.
- D. With Alletra 6000 your customer will be able to configure an Active Peer Persistence wizard with a one- to-many topology.
Answer: C
Explanation:
The correct answer is B because HPE Alletra Storage MP B10000 supports VMware-oriented high- availability designs using Peer Persistence / Active Peer Persistence patterns. HPE documentation provides VMware ESXi host connectivity guidance for Alletra Storage MP B10000 and also describes VMware Metro Storage Cluster configurations with Active Peer Persistence. That is the correct platform positioning for protecting VMware workloads that require storage-level availability across sites. Option A is incorrect because Alletra 6000 Peer Persistence is based on NimbleOS synchronous replication behavior and is not positioned as an "Active Peer Persistence wizard with one-to-many topology." Option C is also incorrect because Active Peer Persistence is a high-availability replication design, not a one-to-many replication topology. One-to-many replication is a different replication pattern and should not be conflated with Peer Persistence. Option D is incorrect because "Active Peer Persistence" is associated with Alletra Storage MP B10000 / Primera / Alletra 9000-class architecture rather than Alletra 6000's classic Peer Persistence model. Reference/topics: HPE Alletra Storage MP B10000, VMware ESXi integration, Active Peer Persistence, storage HA design.
NEW QUESTION # 20
Your customer is planning a Scality RING solution. Approximately 750 TB of data must be stored on the SDS. The customer prefers SSD or NVMe drives.
What is true regarding this solution?
- A. The minimum capacity for ordering Scality RING perpetual licenses is 1000TB.
- B. HPE servers, for example, such as Alletra Storage Server 4120, can be used for Scality RING deployments.
- C. Scality licenses cannot be purchased from HPE.
- D. Scality RING Single Site Hardware Lifetime licenses are provided at a lower cost compared to perpetual licenses.
Answer: B
Explanation:
The correct answer is A because Scality RING is positioned by HPE as a scale-out object and file storage solution built on qualified HPE server platforms, including HPE Alletra Storage Server models.
For a customer planning approximately 750 TB of usable software-defined storage, the design focus is the validated HPE server configuration, drive type, usable-capacity target, and Scality license sizing.
HPE documentation describes the Scality RING solution as consisting of HPE server systems, Scality license and maintenance, and installation services, with licensing based on unique usable data capacity.
The minimum RING configuration is not 1000 TB; HPE references a lower starting usable-capacity threshold, so option B is incorrect. Option D is also incorrect because Scality solutions and licenses are explicitly available through HPE solution packaging. Option C is not the best design statement for this customer use case because the key technical validation is platform support and capacity alignment, not a generic claim about lower-cost licensing. This maps directly to the course topic covering scale-out unstructured data platforms, including Scality, Qumulo, Cohesity, and related HPE storage-server designs.
NEW QUESTION # 21
You are planning a data center networking solution for your customer.
The plan includes:
* A VXLAN/EVPN solution
* Aruba CX8325H as TOR switches
* Aruba CX8320 as core switches
How should you configure the ports from the TOR switches to the core switches?
- A. The ports should be configured as LAG member layer 2 ports to both core switches.
- B. The ports should be configured as LAG member routed ports to both core switches.
- C. The ports should be configured as standalone routed ports to each core switch.
- D. The ports should be configured as standalone layer 2 ports to each core switch.
Answer: C
Explanation:
The correct answer is A because VXLAN/EVPN data-center fabrics are normally built on a routed Layer 3 underlay. In this design, each top-of-rack switch forms independent routed links toward the core or spine layer, and equal-cost multipath routing is used to provide scale-out bandwidth and resilience. The VXLAN/EVPN overlay then provides Layer 2 and Layer 3 tenant connectivity above that routed underlay. Option B is incorrect because LAG member Layer 2 ports represent a traditional Layer 2 aggregation design, not the preferred underlay model for EVPN/VXLAN. Option C is also incorrect because standalone Layer 2 links would create an underlay that lacks the routed ECMP characteristics expected in this fabric architecture. Option D is not the best answer because LAG is not required between TOR and core switches in an EVPN routed fabric; independent routed links provide better fabric behavior and failure isolation. The course includes Aruba networking and advanced virtualization/data-center design topics, and this question tests the candidate's ability to select the correct port model for an HPE Aruba EVPN/VXLAN solution.
NEW QUESTION # 22
Your customer wants to simplify storage management for their VMware-based environment by configuring HPE Storage Integration Pack for VMware vCenter Server. They want to use HPE OneView for VMware vCenter Server for ESXi deployment.
Currently, they have 30 HPE ProLiant DL360 Gen11 deployed with ESXi 8.x and they plan to add 30 additional systems with exactly the same setup. Storage capacity is provided by HPE Alletra Storage MP B10000.
Which statement about the configuration and customer requirements is true?
- A. HPE OneView for VMware vCenter Server supports the Proactive HA feature, which will define the response in case of host health degradation to improve workload availability.
- B. Using HPE Storage Integration Pack for VMware vCenter Server for VVol creation is only supported if the ESXi systems have vSphere Enterprise Plus subscriptions.
- C. HPE Storage Integration Pack for VMware vCenter Server and HPE OneView for VMware vCenter Server only support the HPE Synergy platform managed using HPE Composer2.
- D. Your customer must purchase the appropriate number of licenses for HPE Storage Integration Pack for VMware vCenter Server and HPE OneView for VMware vCenter Server.
Answer: A
Explanation:
The correct answer is D. HPE OneView for VMware vCenter integrates HPE infrastructure health, lifecycle, and management information into the VMware operational plane. A major value point is support for VMware Proactive HA integration, where hardware health signals from HPE infrastructure can be passed into vCenter so the cluster can react before a hard failure affects virtual machines. HPE documentation specifically includes VMware Proactive HA support for HPE OneView for VMware vCenter. Option A is incorrect because the VMware integration is not limited only to HPE Synergy managed by Composer2; it is also relevant to supported HPE ProLiant and other HPE- managed infrastructure. Option B is wrong because the VMware integration tools are not licensed in the simplified per-component way stated. Option C is also too restrictive because VVol and storage integration behavior depends on the array, vSphere support matrix, and storage provider capability, not a blanket rule requiring Enterprise Plus for the integration itself. The correct design focus is operational availability: Proactive HA improves workload placement and response when HPE hardware health degrades. Reference/topics: HPE OneView for VMware vCenter, Proactive HA, VMware integration, HPE infrastructure monitoring.
NEW QUESTION # 23
Your customer plans to deploy multiple virtual machines running database workloads. They plan to re-use and extend an existing Synergy, 3PAR, and VMware infrastructure.
What is true regarding a possible upgrade?
- A. HPE 3PAR cannot be used with VMware infrastructure running on Synergy.
- B. HPE OneView for Ansible Orchestrator can be used to deploy the operating system to new ESXi hosts.
- C. HPE OneView for VMware vCenter can be used to deploy additional ESXi hosts.
- D. HPE OneView can be used for rapid VM deployment.
Answer: C
Explanation:
The correct answer is A because HPE OneView for VMware vCenter provides VMware administrators with integrated HPE infrastructure management from within vCenter and supports deployment workflows for ESXi hosts on supported HPE platforms such as HPE Synergy and HPE ProLiant. In this scenario, the customer already has a Synergy, 3PAR, and VMware environment and wants to extend it for additional virtual machines running database workloads. Adding ESXi hosts through the HPE OneView for VMware vCenter integration is a valid upgrade path because it aligns server provisioning and VMware lifecycle operations with the existing management model. Option B is incorrect because it confuses infrastructure automation with the specific HPE OneView for VMware vCenter ESXi deployment function. Option C is false because HPE 3PAR has long been supported in VMware environments and can be part of Synergy-based infrastructure. Option D is imprecise: HPE OneView composes and manages infrastructure; it is not primarily a rapid VM deployment tool. The course covers database workload architectures, Synergy, HPE storage, VMware integration, and the use of HPE tools for validated traditional solution design.
NEW QUESTION # 24
Your customer has a combination of HPE and non-HPE equipment.
What is the correct functionality available in Aruba Fabric Composer for this customer's environment?
- A. Management and monitoring of HPE Alletra Storage MP B10000 arrays.
- B. Acceleration of spine-leaf fabric provisioning on ArubaOS-CX switches.
- C. Configuration of SAN zoning on ArubaOS-CX 8400 switches.
- D. Management and monitoring of HPE Synergy Virtual Connect.
Answer: B
Explanation:
The correct answer is D because Aruba Fabric Composer is designed for data-center fabric automation, especially ArubaOS-CX based spine-leaf and EVPN-VXLAN environments. It discovers data-center infrastructure and automates the provisioning and ongoing configuration of both spine-and- leaf fabrics and Layer 2 two-tier topologies. That makes it directly relevant to customers with mixed HPE and non-HPE environments where repeatable fabric deployment, validation, and operational consistency are required. Option A is incorrect because HPE Alletra Storage MP B10000 management belongs to HPE storage management tools such as Data Services Cloud Console and array-specific integrations, not Aruba Fabric Composer. Option B is incorrect because HPE Synergy Virtual Connect is managed through HPE OneView / Synergy Composer, not Aruba Fabric Composer. Option C is also not the best answer because SAN zoning is normally performed through Fibre Channel SAN fabric tools or storage-networking workflows, not through Aruba Fabric Composer as a generic function of ArubaOS-CX 8400. The exam logic is clear: Fabric Composer's value is accelerating, standardizing, and validating data-center network-fabric provisioning. Reference/topics: Aruba Fabric Composer, data-center fabric automation, ArubaOS-CX, spine-leaf provisioning.
NEW QUESTION # 25
Your customer wants to implement a disaster recovery solution for their virtualization workload. They also want to implement a protection method that will protect the workload in case of a site failure.
Their existing environment includes the following configurations:
* All ESXi systems are located in the same datacenter
* Virtual machines are protected by an HA cluster
* Some of the VMs are protected with Fault Tolerance
* HPE Synergy 480 Gen11 is the compute platform
* HPE Alletra Storage MP B10000 array for storage
* Orchestrated failover for all VMs using VMware tools
The customer plans to replicate the same setup at the second site. The total number of virtual machines that must be protected is 200. Your customer also expects an RPO of 0.
Which component or configuration is a necessary part of a solution that will meet all customer requirements?
- A. HPE Synergy frames from the secondary site added to the logical enclosure configured in the primary site.
- B. Synchronous replication configured between sites to replicate the volumes used to build the datastores.
- C. Storage policy-based management (SPBM) must be configured for a group of the virtual machines.
- D. Asynchronous replication configured between sites used to replicate the volumes used to build the datastores.
Answer: B
Explanation:
The correct answer is C. RPO 0 is the decisive requirement. A zero recovery point objective means the customer cannot lose acknowledged writes if a site fails. That requirement cannot be satisfied by asynchronous replication because asynchronous copy always introduces replication lag. The storage volumes backing the VMware datastores must be synchronously replicated between the two sites so that committed data exists at both locations before the write is considered protected. HPE Alletra Storage MP B10000 is designed for mission-critical block workloads and supports high-availability replication models, including synchronous Remote Copy / Peer Persistence designs for VMware environments. HPE documentation for Active Peer Persistence describes synchronous Remote Copy as the mechanism used for high-availability protection across arrays. Option A is incorrect because stretching or joining HPE Synergy frames across sites is not the mechanism that provides RPO 0.
Option B can help with VMware policy-driven placement, but SPBM alone does not replicate data.
Option D fails the RPO requirement. Reference/topics: DR architecture, RPO 0, synchronous replication, B10000 Remote Copy, VMware datastore protection.
NEW QUESTION # 26
One of your customers is planning to refresh their current campus wired and wireless networking equipment.
They are currently moving to a pay-per-use model for their whole IT solution.
They are wondering if there is a possibility to get new networking equipment in this model without capital expenses. They are also interested in moving LAN management to an external service provider. You are presenting HPE GreenLake for Aruba Networking.
Which statement is true for this customer situation?
- A. HPE GreenLake for Aruba Networking is the central monitoring cloud software for Aruba equipment only.
- B. HPE GreenLake for Aruba Networking offers HPE experts support for third-party wireless devices.
- C. HPE GreenLake for Aruba Networking only offers Aruba software licenses in a subscription-based format.
- D. Aruba networks can be managed by Aruba experts with 24/7 hardware monitoring.
Answer: D
Explanation:
The correct answer is A because the customer is asking for a network refresh without traditional capital purchase and also wants externalized operational management. HPE GreenLake for Networking is positioned as a Network-as-a-Service model that allows customers to consume HPE Aruba Networking capabilities in a cloud-like operating model rather than buying every component upfront. HPE's GreenLake for Networking QuickSpecs describe it as a comprehensive NaaS offering for consuming HPE Aruba Networking Edge Services Platform capabilities in a cloud-like way. HPE Managed Services can also provide remote monitoring, management, and optimization of supported infrastructure, which aligns with the customer's desire to move LAN management to an external provider. Option B is too narrow because the offer is not merely a software-license subscription. Option C confuses HPE GreenLake for Networking with Aruba Central-style cloud management. Option D is incorrect because the service is built around HPE Aruba Networking solutions, not generic expert support for arbitrary third-party wireless platforms. Reference/topics: HPE GreenLake for Networking, NaaS positioning, HPE Managed Services, business-outcome mapping.
NEW QUESTION # 27
Your customer plans to replace a legacy HPE BladeSystem solution with the HPE Synergy platform.
The customer requirements include:
* 30 compute nodes to support their virtualization workloads
* Redundancy within the management subsystem
* An in-frame storage solution to support vSAN
* A guidance/automation technology with HPE Aruba to virtualize WWNs
* Simplified management with a single logical enclosure
You are reviewing the following proposal:
* 3 x HPE Synergy 12000 frames
* 2 x HPE Virtual Connect SE 100Gb F32 Modules for Synergy
* 4 x HPE Synergy 50Gb Interconnect Link Modules
* 3 x HPE D3940 Storage Modules with maximum number of drives
* 6 x HPE Composer2 + 30 x HPE OneView Advanced licenses
* 30 x SY 480 Gen11 compute modules, each with 2 CPUs and appropriate mezzanine cards Which statement about the proposal is true to help meet the customer requirements?
- A. 3 x HPE Composer 2 modules can be removed from the proposal, as you need one HPE Composer2 module per HPE Synergy frame for enhanced availability.
- B. Each frame should be equipped with two HPE 12Gb SAS switches to provide connectivity between compute nodes and D3940 Storage Module.
- C. HPE 32Gb Fibre Channel switches should be added to the proposal to enable WWN virtualization and profile mobility.
- D. Additional HPE OneView Advanced licenses should be added for the HPE Virtual Connect modules and HPE D3940 Storage Modules.
Answer: B
Explanation:
The correct answer is C because HPE Synergy D3940 is an in-frame direct-attached storage module, and compute modules access it through HPE Synergy 12Gb SAS Connection Modules. For a redundant in-frame storage design, each Synergy frame that contains a D3940 storage module should include two SAS connection modules to provide redundant paths between the compute modules and the storage module. This is especially important for virtualization and software-defined storage designs such as vSAN, where storage path availability is a core design requirement. Option A is incorrect because HPE OneView Advanced licensing is associated with managed server infrastructure licensing, not separate additional licenses for every Virtual Connect or D3940 module. Option B is not required for this in- frame DAS design; Fibre Channel switches are used for SAN connectivity, not for D3940 SAS connectivity. Option D misstates Composer design: Composer redundancy is planned at the management-appliance level, not as a simple one-per-frame removal rule. This aligns with the course's Synergy, composable infrastructure, virtualization, and storage-networking design objectives.
NEW QUESTION # 28
You presented a solution to your customer that will replace their legacy HPE BladeSystem.
The new solution is based on the HPE Synergy platform and consists of the following components:
* 5 HPE Synergy 12000 frames
* 2 HPE Virtual Connect SE 100Gb F32 Modules for Synergy
* 8 HPE Synergy 25/50Gb Interconnect Link Modules
* 60 HPE Synergy 480 Gen11
Which statement about the business and financial benefit of the new solution for the customer is true?
- A. Compared to the legacy HPE BladeSystem, the HPE Synergy platform supports more interconnect modules, which provides better flexibility and expansion possibilities.
- B. Compared to the legacy HPE BladeSystem, the HPE Synergy platform supports more expansion slots in the form of mezzanine cards.
- C. HPE Virtual Connect SE 100Gb F32 Module for Synergy can support FC traffic once an upgrade license for each module is added in HPE OneView.
- D. HPE Synergy 480 Gen11 compute modules have an extension that will allow the customer to install 4 GPUs in half-height format compute nodes.
Answer: A
Explanation:
The correct answer is D. The business value of the proposed HPE Synergy design is the more flexible, scalable composable-fabric architecture compared with traditional blade designs. HPE Synergy uses a primary/satellite networking architecture with Virtual Connect and Interconnect Link Modules, allowing network connectivity to scale across multiple frames while reducing upstream cabling, top-of- rack dependency, and aggregation-port consumption. HPE describes the Virtual Connect SE 100Gb F32 design as using a disaggregated, rack-scale primary/satellite architecture to consolidate data center network connections, reduce hardware, and scale network bandwidth across multiple HPE Synergy frames. That is the financial point: the customer gains higher fabric flexibility and expansion capability without replicating a full set of expensive intelligent fabric modules in every frame. Option A is not the relevant benefit and overstates the GPU expansion concept. Option B is technically true about FC capability, but it does not describe the primary business and financial value of the proposed multi- frame architecture. Option C is a narrower compute-module feature and is not the strongest financial argument. Reference/topics: HPE Synergy business value, Virtual Connect primary/satellite fabric, network consolidation, financial-impact presentation.
NEW QUESTION # 29
Your customer wants to implement an HPE SimpliVity stretched cluster spanning two sites to improve availability.
You are reviewing an HPE SimpliVity proposal that consists of the following components:
* 12 HPE SimpliVity 380 Gen11 nodes, 8 for the primary site and 4 for the remote site, all of which have
2 CPUs, 16 cores each
* 12 HPE OneView Advanced licenses
* 2 HPE Alletra Storage MP B10000, 1 for the primary site and 1 for the remote site
* 384 core VMware vSphere Standard subscriptions
* Two pairs of ArubaOS-CX 8325 switches
Which statement about this proposal is true?
- A. In order to enable DRS functionality, vSphere Standard subscriptions should be replaced with vSphere Foundation subscriptions.
- B. Additional VMware subscriptions should be added, as the HPE SimpliVity 380 Gen11 core count is higher than needed.
- C. A Remote Copy license should be activated on all HPE Alletra arrays to enable remote HPE SimpliVity backups.
- D. Aruba OS-CX 8325 should be enhanced with a Pensando license so HPE SimpliVity traffic can be secured.
Answer: A
Explanation:
The correct answer is B. The proposal includes VMware vSphere Standard subscriptions, but the requirement context is a stretched, availability-focused HPE SimpliVity design. Distributed Resource Scheduler is an advanced VMware function used for automated VM placement and load balancing across hosts. VMware's product-line comparison shows Distributed Resource Scheduler under Enterprise Plus and vSphere Foundation feature sets, while vSphere Standard does not provide that capability. Therefore, if the customer requires DRS functionality, vSphere Standard must be replaced with an edition that includes DRS, such as vSphere Foundation. Option A is incorrect because the listed core count is aligned with 12 nodes x 2 CPUs x 16 cores, which totals 384 cores; the issue is not missing core quantity. Option C is incorrect because HPE Alletra Remote Copy licensing is unrelated to enabling HPE SimpliVity backup behavior. Option D is not required to make a SimpliVity stretched cluster valid; Pensando is a distributed services/security acceleration technology, not a prerequisite for SimpliVity stretched-cluster traffic. Reference/topics: proposal validation, VMware subscription selection, SimpliVity stretched cluster design, licensing alignment.
NEW QUESTION # 30
Your customer has a combination of HPE and non-HPE equipment.
Which is the correct functionality available in Aruba Fabric Composer for this customer's environment?
- A. VLAN visibility of VMware on non-HPE servers.
- B. Management of Pensando cards in the servers.
- C. Management and monitoring of HPE Alletra Storage MP B10000 arrays.
- D. Configuration of SAN zoning on ArubaOS-CX 8400 switches.
Answer: A
NEW QUESTION # 31
Your customer is in the early stages of an AI project. They are requesting a POC demonstrating how they can utilize on-prem data with a limited amount of rack space, in an air-cooled environment.
Performance with the AI use case of Retrieval-Augmented Generation (RAG) will be the primary factor in their decision making.
Which HPE Compute offering would be suitable in this scenario?
- A. HPE ProLiant Compute DL320 Gen11 with NVIDIA L4 GPUs.
- B. HPE ProLiant Compute DL384 Gen12 with NVIDIA GH200 NVL2.
- C. HPE Cray XD670 with NVIDIA H200 Tensor Core GPUs.
- D. HPE ProLiant Compute DL380a Gen12 with NVIDIA H200 NVL GPUs.
Answer: B
Explanation:
The correct answer is B. The customer is not asking for the lowest-cost AI inference server; the scenario explicitly states that RAG performance is the primary decision factor, while also requiring limited rack space and air cooling. HPE ProLiant Compute DL384 Gen12 with NVIDIA GH200 NVL2 is the strongest fit because it is designed for high-performance enterprise AI and provides coherent CPU
/GPU memory architecture with very high memory bandwidth, which is especially valuable for RAG and larger language-model workflows. HPE product information describes the DL384 Gen12 as a 2U air-cooled 19-inch rack server with NVIDIA GH200 NVL2, and HPE states that the platform provides outstanding coherent memory and memory bandwidth to run larger models faster and more cost- effectively. Option A is powerful, but the DL380a Gen12 is a larger GPU platform and is less optimized for the "limited rack space" RAG-specific requirement than the DL384. Option C is compact but lower- performance, making it weaker when performance is the primary factor. Option D is excessive for an early-stage on-prem POC. Reference/topics: AI workload sizing, RAG architecture, DL384 Gen12, GH200 NVL2, air-cooled AI infrastructure.
NEW QUESTION # 32
Your customer's environment includes HPE Private Cloud Business Edition with deployed HPE SimpliVity
380 Gen11 nodes.
They have asked you to upgrade the vSphere, OmniStack, and firmware components of the environment in a fully controlled operation.
Which tool should you use?
- A. HPE SimpliVity Upgrade Manager application
- B. HPE OVC/HPC plugin and vCenter Update Manager
- C. HPE GreenLake / DSCC / PCBE site upgrade
- D. HPE OCA/HPC plugin and vCenter Update Manager
Answer: C
Explanation:
The correct answer is A. In an HPE Private Cloud Business Edition environment, the proper operational model is to use the HPE GreenLake / Data Services Cloud Console workflow for system- level lifecycle activities rather than treating the environment as a standalone SimpliVity-only deployment. HPE documentation for Private Cloud Business Edition identifies Data Services Cloud Console as the interface used to set up, upgrade, and manage PCBE environments, and the "Updating system software" workflow is specifically tied to PCBE administration through DSCC. The customer's requirement is broader than a single OmniStack upgrade: it includes vSphere, OmniStack, and firmware in a controlled operation. That makes a PCBE site-upgrade workflow the best match. Option B is associated with traditional SimpliVity software and firmware upgrade processes, but it is not the most complete answer for a PCBE-managed environment. Options C and D mix plugin/update- manager concepts and do not represent the correct PCBE lifecycle mechanism. Reference/topics: PCBE lifecycle operations, DSCC, SimpliVity upgrade planning, HPE GreenLake operational management.
NEW QUESTION # 33
Which statement about HPE SimpliVity is true?
- A. HPE SimpliVity 380 Gen11 cluster with compute nodes requires the same CPU in all nodes.
- B. A single Intel-based HPE SimpliVity node can support up to 8 non-HPE SimpliVity servers.
- C. Mixing AMD and Intel chassis in the same federation is fully supported.
- D. A single AMD-based HPE SimpliVity node can support up to 4 non-HPE SimpliVity servers.
Answer: B
Explanation:
The correct answer is D. In HPE SimpliVity designs, non-HPE SimpliVity compute nodes can be added to consume the storage and data services provided by SimpliVity nodes, but the supported ratio depends on the validated SimpliVity platform and processor family. For Intel-based HPE SimpliVity nodes, the supported design rule in this context allows up to eight non-HPE SimpliVity servers per SimpliVity node. Option A is incorrect because compute-node designs do not require identical CPUs across every server in the way stated; compatibility and supportability are governed by the validated platform, hypervisor, cluster, and SimpliVity federation rules. Option B is too broad and unsafe:
mixing processor families and chassis types inside the same federation is controlled by strict HPE support matrices and is not "fully supported" as a general rule. Option C gives the wrong AMD-based ratio for the scenario. HPE SimpliVity 380 Gen11 is documented as an Intel Xeon-based platform and is positioned for hyperconverged infrastructure with VM-centric management, data efficiency, backup, and disaster recovery. Reference/topics: SimpliVity sizing rules, compute-node attachment, federation design, HCI platform validation.
NEW QUESTION # 34
Your customer is considering HPE Nimble or HPE Primera for use as a Peer Persistence enabled platform for their critical workloads.
Which statement about these platforms and their benefits is true for Peer Persistence?
- A. With Nimble, your customer will be able to access the protected volume via the target storage array.
- B. With Primera, your customer will be able to deploy Quorum Witness via OVA image.
- C. With Nimble, your customer will be able to deploy Witness/Quorum via OVA image.
- D. With Nimble, your customer will be able to combine an Active Peer Persistence variant with a 1-1 topology.
Answer: B
Explanation:
The correct answer is D. HPE Primera Peer Persistence and Active Peer Persistence designs use HPE Quorum Witness to support automatic failover decisions between arrays. The Quorum Witness is deployed as a virtual appliance, typically from an OVA image, and is placed in a third failure domain so that it can arbitrate between the two storage systems during communication or site-failure scenarios.
HPE identifies Quorum Witness as a necessary component for automatic failover between arrays in Peer Persistence and Active Peer Persistence configurations. Option A is incorrect because Nimble
/Alletra 6000 Peer Persistence does not make the protected volume independently active through the target array in the same active-active manner. Option B is incorrect because "Active Peer Persistence" is associated with Primera/Alletra 9000/B10000-class designs, not classic Nimble terminology. Option C mixes terms: Nimble uses a Witness service for ASO behavior, but "Quorum Witness via OVA" is the precise Primera-style statement. Reference/topics: Peer Persistence, Active Peer Persistence, HPE Primera, Quorum Witness, failure-domain arbitration.
NEW QUESTION # 35
Your customer requires a data protection solution that will support their workloads running on an HPE Alletra MP B10000 storage array.
Your customer requirements include:
* Protecting VMware vSphere workloads
* Covering different hypervisors
* Pay-per-use model
* Near synchronous and block-level replication
Select the most appropriate solution.
- A. HPE StoreOnce 3660
- B. HPE Data Ops Manager
- C. HPE Zerto
- D. HPE Alletra Storage Server 4120
Answer: C
Explanation:
The correct answer is A. HPE Zerto is the appropriate solution because the requirements describe application and VM-level cyber resilience/disaster recovery, not array management or backup-target hardware. Zerto protects virtualized workloads using near-synchronous, block-level replication and journal-based recovery, which supports very low RPOs and granular recovery points. HPE's Zerto product material describes near-synchronous replication with recovery points measured in seconds, and HPE GreenLake for Disaster Recovery uses Zerto continuous data protection in a cloud-service model. Option B is incorrect because HPE Data Ops Manager manages HPE block storage operations and data services; it is not the DR engine for cross-hypervisor workload replication. Option C is a storage-server platform and does not provide the requested VM-level replication service. Option D, HPE StoreOnce, is a backup appliance target; it is valuable for backup retention and deduplication but does not provide near-synchronous, block-level VM replication across hypervisors. Reference/topics:
HPE Zerto, HPE GreenLake for Disaster Recovery, VMware workload protection, pay-per-use data protection, block-level replication.
NEW QUESTION # 36
Which statement about the security of HPE solutions is correct?
- A. Aruba CX 6300 Switch Series has Pensando ASIC integrated, which provides security services like firewall, micro-segmentation, and telemetry.
- B. Aruba switches have the Pensando ASIC integrated, which provides security services like firewall, micro-segmentation, and telemetry.
- C. HPE Superdome Flex supports Pensando Distributed Services Cards with additional licenses per HPE Superdome Flex chassis.
- D. HPE Apollo Gen10 or later systems and ProLiant Gen10 or later systems support Pensando Distributed Services Cards.
Answer: D
Explanation:
The correct answer is C because Pensando Distributed Services Platform / Distributed Services Cards are positioned for supported HPE server platforms such as HPE ProLiant, Edgeline, and Apollo systems. The purpose is to provide distributed infrastructure services, including telemetry, policy enforcement, segmentation, and security functions close to the workload rather than forcing all traffic through centralized appliances. Option A is too broad because not all Aruba switches have Pensando silicon integrated. The switch family associated with embedded Pensando data-processing capabilities is specifically the Aruba CX 10000 class, not Aruba switching in general. Option B is incorrect because the Aruba CX 6300 is an access/switching platform, not a Pensando-integrated distributed services switch. Option D is also not a valid general positioning statement for Superdome Flex in this context; the standard HPE security positioning for Pensando DSC is not based on adding per-chassis Superdome Flex licenses. The architecture principle is that HPE can extend security and telemetry into the server edge through Pensando DSC where supported by the platform. Reference/topics: HPE security offerings, Pensando Distributed Services Platform, ProLiant/Apollo security acceleration, hybrid-infrastructure micro-segmentation.
NEW QUESTION # 37
You are designing an HPE solution for SAP HANA. You are considering an as-a-service approach as one of the variants to be proposed to the customer.
What is true regarding HPE GreenLake for SAP HANA?
- A. HPE GreenLake for SAP HANA offers billing based on GB of RAM used by SAP HANA.
- B. HPE GreenLake for SAP HANA requires an onsite HPE Alletra Storage MP X10000.
- C. HPE GreenLake for SAP HANA offers billing based on the amount of users using SAP HANA.
- D. HPE GreenLake for SAP HANA can be used for SAP HANA instances running in the public cloud.
Answer: A
Explanation:
The correct answer is B. HPE GreenLake for SAP HANA is positioned as an on-premises, consumption- based infrastructure model for SAP HANA rather than a public-cloud runtime service or a user-count licensing model. The key sizing and financial driver is the SAP HANA memory footprint because SAP HANA is an in-memory database platform. HPE describes the GreenLake SAP HANA model as a complete pay-per-use infrastructure solution with an on-premises appliance, operating system, and services, and states that the simplified monthly invoice is based on the total gigabytes of RAM used by the SAP HANA system. Option A is incorrect because the service is not defined by a mandatory HPE Alletra Storage MP X10000 array requirement. Option C is incorrect because this offer is specifically built to deliver cloud-like consumption while keeping SAP HANA infrastructure under customer control, typically on-premises. Option D is incorrect because SAP HANA infrastructure consumption is not metered by end-user count. Reference/topics: HPE GreenLake consumption model, SAP HANA workload sizing, as-a-service positioning, financial-impact presentation.
NEW QUESTION # 38
You presented a solution to your customer that will replace their legacy HPE BladeSystem.
The new solution is based on the HPE Synergy platform and consists of the following components:
* 5 HPE Synergy 12000 frames
* 2 HPE Virtual Connect SE 100Gb F32 Module for Synergy
* 8 HPE Synergy 50Gb Interconnect Link Module
* 60 HPE Synergy 480 Gen11
Which statement describes the business and financial benefits for this new solution on the customer?
- A. Compared to the legacy HPE BladeSystem, the HPE Synergy platform supports more expansion slots in the form of mezzanine cards.
- B. HPE Synergy supports master/satellite approach that requires less HPE Virtual Connect modules, and so will be more economical.
- C. Compared to the legacy HPE BladeSystem, the HPE Synergy platform supports more interconnect modules which provides better scalability and expansion possibilities.
- D. HPE Synergy needs more HPE Virtual Connect modules because of the increased bandwidth for Gen11 compute nodes.
Answer: B
Explanation:
The correct answer is A because HPE Synergy can use a master/satellite interconnect design in which a smaller number of Virtual Connect modules provide the primary network intelligence, while satellite interconnect link modules extend connectivity across additional frames. This reduces the number of full Virtual Connect modules required in a multi-frame configuration, lowering hardware cost while still supporting scalable connectivity for the compute estate. In this proposal, the presence of two Virtual Connect SE 100Gb F32 modules and multiple 50Gb interconnect link modules reflects that design model. Option B describes scalability in general terms, but it does not directly identify the business and financial benefit. Option C is not the primary value proposition and does not explain the economics of the proposed topology. Option D is the opposite of the intended Synergy value: the architecture is designed to reduce, not increase, the number of expensive fabric modules in larger configurations. The course expects candidates to connect technical architecture choices to business outcomes, especially when presenting the financial impact of replacing legacy BladeSystem infrastructure with composable HPE Synergy infrastructure.
NEW QUESTION # 39
......
PDF Download HP Test To Gain Brilliante Result!: https://www.passreview.com/HPE7-V01_exam-braindumps.html