Get 100% Passing Success With True 352-001 Exam! [Feb-2022]
Cisco 352-001 PDF Questions - Exceptional Practice To Cisco Certified Design Expert Qualification Exam
Cisco 352-001 Exam Certification Details:
| Sample Questions | Cisco 352-001 Sample Questions |
| Exam Price | $450 USD |
| Passing Score | Variable (750-850 / 1000 Approx.) |
| Duration | 120 minutes |
| Exam Code | 352-001 CCDE |
| Number of Questions | 90-110 |
| Exam Registration | PEARSON VUE |
| Exam Name | CCDE Design Written Exam |
The CCDE 352-001 exam is a highly coveted validation among network design engineers who want to establish their expertise in network functionalities. This qualifying test unlocks an individual’s mastery in crucial network tasks such as gathering network requirements, developing network designs, creating an implementation guide, and carrying out plans to meet the demands of a business. And if you’re successful with your exam along with its required lab evaluation, the CCDE practical exam v2.0, then you’ll be awarded the renowned Cisco Certified Design Expert (CCDE) certification. But of course, passing 352-001 test is not a piece of cake. So, we will help you accomplish your goals through the list of the relevant books & training courses below:
- CCDE Study Guide by Marwan Al-shawi (Cisco Press)
Considered as the most authoritative resource for the CCDE, this study guide incorporates both concepts and technical features of network design. It is thoroughly written and studied by the CCDE engineers who want to share the key ways to pass the tough CCDE 352-001 exam. The technologies and protocols recorded in the book are based on a variety of business requirements. This means that the content of this manual is not mainly about the fundamental technology but rather on the differences in design options. Thus, it emphasizes the variations in network designs, from its scalability to flexibility and security aspects. By understanding the dissimilarities, it’s much easier to simplify the tasks and pick the right design according to the requirements set by the company. Don’t worry because such a book delivers a lot of scenario-based samples so you can practice crafting designs and making analysis out of a given situation. Some of the related topics mentioned in this material include data centers, converged enterprise networks, service providers, high availability, QoS, multicast, IPv6, and such. In a nutshell, studying the book introduces you to a better command of network designs in various environments.
- CCDE In-Depth by Orhan Ergun (Amazon)
Carve a more effective exam journey with the aid of this high-caliber book. Featuring a rigorous elaboration of the objectives for the qualifying and practice tests, such material provides help in furnishing you with a deeper understanding of network design. It strictly follows a systematic guide so you touch on all the key technologies that are essential in today’s networking field. Some of the content covered here is network design principles, protocols, and practices. And distinctively, it does not just revolve around theoretical stuff. Thus, it highlights the real-world scenarios that network design engineers have to deal with every day. More so, it reveals the ins and outs of network design and how this area is utilized by large companies. Most of the technical tasks in such a guide are shaped into different case studies and review questions. On top of the detailed lessons, it also offers practical insights directly from the author. Through these realistic strategies straight from the expert, you will obtain more reliable techniques that will surely improve your design thinking and skills.
- Art of Network Architecture: Business-Driven Design by Denise Donohue and Russ White (Cisco Press)
As suggested by Cisco experts, this manual is another key item when preparing for the CCDE 352-001 validation. Uniquely, it concentrates on how businesses make use of network architecture and evolving technologies. In particular, it unravels the relationship between business requirements and technical concerns so you can optimize various network interactions in relation to people, time, and flow. Some skills developed here include customizing designs, minimizing network management pain, maximizing mobility, picking the right routing protocols, designing hardening networks, and developing data center control planes. It also gives attention to paradigm design, network topologies, network virtualization, and MPLS-based L3VPN. Moreover, the content of the book can help you in learning more about the intricacies associated with the removal and change of cloud-hosted environment, the risks associated with SDNs, and the importance of network management. All in all, the main areas highlighted in the material are cloud services, user mobility, SDN, and data center environments as these are the four design challenges that are most likely to have an effect on the business.
- Official Training Courses
It should be noted that the CCDE 352-001 exam is dubbed as a prestigious validation in the tech industry. With such standing, it’s considered as a highly challenging test that combines a lot of Cisco certification areas. As a result, it doesn’t rely on one specific course. In fact, its major sections make use of various training resources to explain the topics further. For example, the Layer 2 Control Plane subject endorses both “Implementing Cisco IP Switched Networks (SWITCH) 2.0” and “Training Course: Designing Cisco Network Service Architectures (ARCH) 3.0” courses. On the other hand, the sections in Layer 3 Control Plane about unicast routing protocol operation utilizes the “Implementing Cisco IP Routing (ROUTE) 2.0” and “Training Course: Configuring BGP on Cisco Routers (BGP) 4.0” . For the sub-area focusing on IPv6 concepts and operations, it’s suggested that you study “IPv6 Fundamentals, Design and Deployment (IP6FD) 3.0” . You can find all the recommended materials, including books, on-demand presentations, and courses from the CCDE Written Learning Matrix available on the vendor’s website.
- CCIE and CCDE Evolving Technologies Study Guide by Brad Edgeworth, Ramiro Garza Rios, and Jason Gooley (Cisco Press)
Both the CCIE and CCDE certificates are part of the Cisco expert-level certification program. And with the changes integrated into this program, you can efficiently connect your core knowledge with the evolving technologies in the industry. These relevant advancements are thoroughly covered in this book so you thrive in whatever Cisco expert exam you pursue. Furthermore, such a study guide underlines some progressing technologies, including IoT and its architectural modes, apps, networks, and operational differences. Modern API-based automation and programmability, along with different cloud environments and cloud service models, are also addressed in the content of this manual. There’s also a section that checks on how you use structure fog and centralized compute to capitalize on the efficiency of the processes. And lastly, it helps you connect and get associated with the Cisco DevNet developer community to acquire relevant resources for Cisco network programming.
NEW QUESTION 26
Refer to the exhibit.
A customer currently has a large EIGRP-based network with several remote sites attached.
All remote sites connect to the two corporate data centers, depicted as 10.1.1.0 and
10.1.2.0. The customer has experienced several network-wide failures where neighbors were stuck-in-active and had other network stability issues due to some links flapping.
Which two redesign options increase stability and reduce the load on the remote site routers, still maintaining optimal routing between remote sites and the two data centers?
(Choose two)
- A. Set the data center routers as stub-routers
- B. Perform summarization at the remote sites, selectively leaking routes sent to the data centers
- C. Set the hello interval timer to be larger than the hold interval
- D. Perform summarization at the data centers, selectively leaking routes sent to the remote sites
- E. Increase the hold interval to accommodate lost hello packets on error-prone links
Answer: A,D
NEW QUESTION 27
Refer to the exhibit.
In this network, all routers are configured to run EIGRP on all interfaces. All interface bandwidths are set to 1000, and the delays are configured as shown. In the topology table at Router C, you see only one path towards 10.1.1.0/24. What is the reason that Router C only has one path in its topology table?
- A. Router B is not advertising 10.1.1.0/24 to Router C because Router C is its feasible successor.
- B. Router D is not advertising 10.1.1.0/24 to Router C because Router C is its feasible successor.
- C. Router B is not advertising 10.1.1.0/24 to Router C due to split horizon.
- D. Router D is not advertising 10.1.1.0/24 to Router C due to split horizon.
Answer: D
NEW QUESTION 28
In the network presented in the following exhibit, all routers are configured to run EIGRP on all links. All packets transmitted during convergence are transmitted once (there are no dropped or retransmitted packets). What is the maximum number of queries P4S-R3 might receive for 192.168.1.0/24 if the link between P4S-R1 and P4S-R2 fails?
- A. one query, since the remote routers P4S-R4, P4S-R5, and P4S-R6 are natural stubs in EIGRP
- B. four queries, one each from P4S-R2, P4S-R4, P4S-R5, and P4S-R6
- C. no queries, because there aren't any alternate paths for 192.168.1.0/24
- D. seven queries, one from P4S-R2 and two each from P4S-R4, P4S-R5, and P4S-R6
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
NEW QUESTION 29
You have been hired by Acme Corporation to evaluate their existing network and determine if the current network design is secure enough to prevent man-in-the-middle attacks. When evaluating the network, which switch security option should you investigate to ensure that authorized ARP responses take place according to known IP-to-MAC address mapping?
- A. IP Source Guard
- B. Dynamic ARP Inspections
- C. DHCP snooping
- D. ARP rate limiting
Answer: B
NEW QUESTION 30
Which statement describes the main difference between the Layer 2 loop-free inverted U design and the Layer 2 loop-free U design?
- A. A loop-free U design extends VLANs between access switches, but a loop-free inverted
U design does not. - B. A loop-free U design has all uplinks active, but a loop-free inverted U design does not.
- C. A loop-free inverted U design has all uplinks active, but a loop-free U design does not.
- D. A loop-free U design extends VLANs between distribution switches, but a loop-free inverted U design does not.
Answer: A
NEW QUESTION 31
Refer to the exhibit. In this BGP design, what is the next hop for 10.1.1.0/24 on R8 and R7?
- A. The next hop for 10.1.1.0/24 on R7 is R3 and the next hop for R8 is R4.
- B. The next hop for 10.1.1.0/24 on R7 is R5 and the next hop for R8 is R6.
- C. The next hop for 10.1.1.0/24 on R7 is R6 and the next hop for R8 is R5.
- D. The next hop for 10.1.1.0/24 on R7 is R8 and the next hop for R8 is R7.
Answer: D
NEW QUESTION 32
Refer to the exhibit. Service Provider A has offered to help Service Provider B to provide local connectivity for a customer who has a business operation in North America and recently opened an office in Asia. The service to be offered for the customer is a Layer 3
MPLS VPN. Service Provider A and Service Provider B have never shared any business dealings or interconnected their networks. What is the most secure and easiest way for the two service providers to interconnect?
- A. VPNv4 peering between ASBRs
- B. back-to-back VRF
- C. carrier supporting carrier
- D. eBGP VPNv4 multihop between route reflectors
Answer: B
NEW QUESTION 33
Three routers in a single broadcast domain are connected by means of a standard Ethernet switch. The only Layer 2 protocol running on this link is Spanning Tree Protocol. The only Layer 3 protocol running on this link is EIGRP, which uses a standard configuration. Then, one of the three routers is manually shut down. How will the other two routers discover the loss of this neighbor?
- A. The switch will send a reverse ARP when the router disconnects from the switch.
- B. The switch will bring down the carrier on all ports momentarily to force all the routers connected to the link to relearn their neighbors.
- C. The EIGRP dead timers will expire due to the absence of EIGRP traffic.
- D. The line protocol on the remaining two routers will be brought down as soon as the carrier is lost from the switch.
Answer: C
NEW QUESTION 34
VPLS is implemented in a Layer 2 network with 2000 VLANs. Which must be the primary concern to ensure successful deployment of VPLS?
- A. PE scalability
- B. VLAN scalability
- C. The underlying transport mechanism
- D. Flooding is necessary to propagate MAC address reachability information
Answer: D
Explanation:
Explanation
[ I think B not 100% sure]
NEW QUESTION 35
A service provider wants to use a controller to automate the provisioning of service function chaining. Which two overlay technologies can be used with EVPN MP-BGP to create the service chains in the data center? (Choose 2)
- A. MPLS L2VPN
- B. Provider Backbone Bridging EVPN
- C. VXLAN
- D. 802.1Q
- E. MPLSoGRE
Answer: B,C
NEW QUESTION 36
You are a network designer and are responsible for ensuring that the network you design is secure. How do you plan to prevent infected devices on your network from sourcing random DDoS attacks using forged source addresses?
- A. Unicast RPF strict mode
- B. ACL-based forwarding
- C. ACL filtering by destination
- D. Unicast RPF loose mode
Answer: A
NEW QUESTION 37
An enterprise company is attaching to a new Gigabit Ethernet-based link from the local service provider.
This connection must have a 150 Mbps committed information rate. For the design of this new service, which QoS mechanism must be used to ensure low packet loss within the service provider network?
- A. LLQ
- B. shaping
- C. policing
- D. CBWFQ
Answer: B
NEW QUESTION 38
You are designing a multisite VPN solution for a customer and you are concerned with the additional overhead of point-to-point tunnels and the associated overlay routing with
DMVPN. How does a GDOI-based VPN eliminate the additional tunnel and routing overhead found in DMVPN?
- A. In a GDOI-based VPN, all group members share a common security association.
- B. The GDOI-based VPN requires overlaying a secondary routing infrastructure through the tunnels.
- C. The GDOI-based VPN leverages the routing protocol to find its peer for tunnel setup.
- D. The GDOI-based VPN requires the provisioning of a complex connectivity mesh.
Answer: A
NEW QUESTION 39
Which tunneling mechanism provides confidentiality and tunneling capabilities?
- A. L2TPv3
- B. MPLS L3VPN
- C. IPsec AH
- D. IPsec ESP
Answer: D
Explanation:
Section: (none)
Explanation/Reference:
NEW QUESTION 40
During a DoS attack, which IPv4 addressing and routing scheme could increase the availability of a network service?
- A. unicast
- B. multicast
- C. broadcast
- D. anycast
Answer: D
Explanation:
Section: (none)
Explanation/Reference:
NEW QUESTION 41
You are the lead IP network designer for a new service provider called XYZ, and you are working closely with the CTO to finalize design requirements. The CTO informs you that they want to transport IPv6 prefixes of customers through the XYZ network at this time; however, they need your advice on whether to deploy dual stack or MPLS 6PE/6VPE.
Which two options do you recommend? (Choose two.)
- A. Prepare the dual-stack infrastructure from the beginning, even if BGP prefixes would have to be announced via IPv4 in case you decide to maintain the BGP-free core.
- B. Use MPLS 6PE to simplify the operation and keep a BGP-free core. When the LDPv6 becomes available, change to 4PE or keep the core using both IPv4 and IPv6. The main goal is to keep the core BGP-free and ensure that IPv4, IPv6, VPNv4, and VPNv6 are all label-switched.
- C. Use MPLS 6VPE to simplify the operation and keep a BGP-free core. When the LDPv6 becomes available, change to 4PE or keep the core using both IPv4 and IPv6. The main goal is to keep the core BGP-free and ensure that IPv4, IPv6, VPNv4, and VPNv6 are all label-switched.
- D. Build a dual-stack network. Enable BGP in the core. Redistribute EBGP routes into IGP.
Answer: A,B
NEW QUESTION 42
VARIATION 2
Which interconnectivity method offers the fastest convergence in the event of a unidirectional issue between three Layer 2 switches connected together with trunk links?
- A. Fiber Ethernet connectivity with BFD enabled
- B. Copper Ethernet connectivity with UDLD enabled
- C. Copper Ethernet connectivity with BFD enabled
- D. Fiber Ethernet connectivity with UDLD enabled
Answer: D
NEW QUESTION 43
A large ISP is analyzing the following IGP requirements:
* The network must be resilient against unstable MTU in one side for newly deployed transmission equipment.
* The network must support MPLS traffic engineering solution for future use.
Which IGP must be selected and why?
- A. IS-IS: the adjacency remains up even if MTU changes
- B. IS-IS: in case of MTU changes, your TE tunnels keep the LSP stable
- C. OSPF: in case of MTU changes, your TE tunnels keep the LSP stable
- D. OSPF: the adjacency remains up even if MTU changes
Answer: A
Explanation:
Section: Evolving Technologies
Explanation/Reference:
NEW QUESTION 44
A green data center is being deployed and a design requirement is to be able to readily scale server virtualization. Which IETF standard technology can provide this requirement?
- A. fabric path
- B. data center bridging
- C. unified fabric
- D. Transparent Interconnection of Lots of Links
Answer: D
NEW QUESTION 45
......
352-001 dumps - PassReview - 100% Passing Guarantee: https://www.passreview.com/352-001_exam-braindumps.html