Oracle 1z0-1066-23 Test Engine Practice Test Questions, Exam Dumps
100% Free 1z0-1066-23 Daily Practice Exam With 111 Questions
NEW QUESTION # 33
You have created several infotiles based on the client requirements. You now want to group them together for display. How do you accomplish this?
- A. First build them into a planning group in Manage Planning Groups. Then open the planning group on the plan by going to Open (choose area) > Choose planning group.
- B. First build them into a planning measure in Manage Planning Measures. Then open the planning measure on the plan by going to Open (choose area) > Choose planning measure.
- C. First build them into an info set in Manage Infosets. Then open the info set on the plan by going to Open (choose area) > Choose info set.
- D. No need to group them. Open them directly on the plan going to Open (choose area) > Choose Infotile.
- E. First build them into a tile set in Manage Table, Graphs, and Analysis Sets. Then open the tile set on the plan by going to Open (choose area) > Choose tile set.
Answer: E
NEW QUESTION # 34
During the FIFO pegging process, what is the correct order in which the supplies are sorted?
- A. Peg unreserved demands first and then demands with reservations
- B. Pegging process does not respect reservation, and demands are sorted based on due dates
- C. Pegging process sorts demands by due dates followed by reservation status
- D. Peg demands with reservations first and then peg demands that do not have reservations
- E. Pegging process does not respect reservation, and demands are sorted based on demand and supply types
Answer: D
NEW QUESTION # 35
Which disaggregation methods are used for each of these measures: adjusted shipments forecast, target service level, and shipments forecast?
- A. Adjusted shipments forecast uses measure, target service level uses same value, and shipments forecast doesn't have any disaggregation method.
- B. Adjusted shipments forecast uses measure, target service level uses equal, and shipments forecast doesn't have any disaggregation method.
- C. Adjusted shipments forecast uses equal, target service level uses same value, and shipments forecast uses measure.
- D. Adjusted shipments forecast uses measure, target service level uses same value, and shipments forecast uses self.
- E. Adjusted shipments forecast uses proportional, target service level uses same value, and shipments forecast uses measure.
Answer: D
NEW QUESTION # 36
Which two statements regarding the Decomposition scheduled process are incorrect? (Choose two.)
- A. It received supplier commits.
- B. It creates or updates an order forecast, used by Supply Chain Collaboration to publish to suppliers.
- C. It does not recognize forecast exceptions.
- D. It reads published planning data from interface tables.
Answer: A,C
NEW QUESTION # 37
Your client uses product categories and global sourcing rules for supply planning. However, their newest product doesn't follow these rules. For a specific item in the category, it needs to be sourced from a different supplier globally.
How should they set this up for the easiest maintenance, going forward?
- A. Create a new local sourcing rule for the item; assign it to the assignment set at the item level; leave the category as is for the remainder of the products.
- B. Create a new global sourcing rule for the item; assign it to the assignment set at the item level; leave the category as is for the remainder of the products.
- C. Create a new global sourcing rule for the item; assign it to the assignment set at the item-organization level; alter the category to be category-organization for the remainder of the products.
- D. Create a new global sourcing rule for the item; remove the category level assignments and create new item level assignments for all items in the category pointing each to the correct global sourcing rule.
- E. Create a new global sourcing rule for the item; assign it to the assignment set at the item-organization level; leave the category as is for the remainder of the products.
Answer: B
NEW QUESTION # 38
You are a demand planner and you want to generate forecast for all laptop and desktop products in the US business unit. You are using standard enterprise and product hierarchy. You have created a demand plan and now you must define plan scope.
Identify three valid steps. (Choose three.)
- A. For plan organizations, select hierarchy as enterprise, level as business unit, and US and level member.
- B. For plan parameters, select forecasting calendar as Gregorian and time level as month.
- C. For plan parameters, select forecasting calendar as Gregorian and time level as week.
- D. For plan organizations, select hierarchy as enterprise, level as country, and US as level member.
- E. For forecasting items, select hierarchy as product, level as category level 1, and laptop and desktop categories as level members.
- F. For forecasting items, select hierarchy as product, level as product, and all laptop and desktop products as level members.
Answer: C,D,E
Explanation:
NEW QUESTION # 39
In order for Supply and Demand Plans to run successfully, which three Configure Planning Analytic tasks must be completed? (Choose three.)
- A. Set up Measure Catalogs
- B. Run the Configure Dimension Catalog process
- C. Set up Default Catalogs
- D. Set up Levels and Attributes
- E. Set up Hierarchy Attributes
- F. Set up Dimension Catalogs
Answer: A,D,F
NEW QUESTION # 40
In which situation would Bills of Distribution be more effective than Sourcing Rules?
- A. When all organizations transfer 50% of the material from Organization B, and 50% from Organization C
- B. When Organization A, Organization B, and Organization C transfer from Organization C
- C. When all organizations are buying from a single outside supplier
- D. When Organization A, Organization B, and Organization C make their own products
- E. When Organization A buys from a Supplier; Organization B transfers from Organization A, and Organization C transfers from Organization B
Answer: E
NEW QUESTION # 41
Which KPIs are available to measure forecasting accuracy and specify how these measures aggregated from item-organization level to higher levels.
- A. MAPE, MAD, and Bias are used to measure forecast accuracy. MAD and Bias are aggregated using sum. MAPE is aggregated using weighted average.
- B. MAPE, MAD, and Bias are used to measure forecast accuracy. MAPE and Bias are aggregated using weighted average. MAD is aggregated using sum.
- C. MAPE, MFE, and Bias are used to measure forecast accuracy. MAPE and Bias are aggregated using weighted average. MFE is aggregated using sum.
- D. MAPE, MFE, and Bias are used to measure forecast accuracy. MAPE and MFE are aggregated using weighted average. Bias is aggregated using sum.
Answer: A
NEW QUESTION # 42
You are defining material planners for your organization. However, when you go to Manage Material Planners, your organization does not appear in the list of values. Why?
- A. The organization is an Item Organization.
- B. The organization must be enabled in Manage Planning Profile Options.
- C. The organization must be enabled in Manage Planning Parameters.
- D. You do not have data access to the organization.
- E. The organization was not enabled for collection under Manage Planning Source Systems.
Answer: E
NEW QUESTION # 43
Your client wants to exclude all of the inventory from the 'Reject' subinventory from only one of their supply plans. What action must be taken to meet this requirement?
- A. Manage Plans > Search and select supply plans > 'Organizations and Schedules' tab > 'Organizations' > 'Subinventory Netting' > Deselect 'Reject' subinventory for each organization
- B. It is not possible to exclude one subinventory from a particular supply plan.
- C. Manage Plans > Search and select supply plans > 'Organizations and Schedules' tab > 'Supply Schedules' > 'Subinventory Netting' > Deselect 'Reject' subinventory for each organization
- D. Manage Subinventories > Choose a material status in which 'Nettable' is unchecked
- E. Manage Subinventories > Search and select subinventory > Deselect 'Nettable'
Answer: A
NEW QUESTION # 44
You are in Implementation project and your customer is a global company with a complex supply chain network. Planners work across different geographies and different line of products. Each planner works with their own set of data and analysis and dashboards.
How do you configure the application so each planner can have their own custom dashboard view-able only to themselves?
- A. You cannot create custom dashboards by user.
- B. Create public page layouts that are tailored to specific business needs.
- C. Enable layout security checkbox in the Administer Planning Security.
- D. Create private page layouts that are tailored to specific business needs.
Answer: D
NEW QUESTION # 45
The structure of the Plan Summary Layout is a predefined __________.
- A. Material Plan view
- B. Set of Infotiles
- C. Supply Demand Workbench
- D. Group of Reports
- E. Set of Exceptions
Answer: B
NEW QUESTION # 46
Your client wants their supply plans to have a customized group of exceptions. What two steps must you complete in order to make sure only these exceptions are included when running all of your client's supply plans? (Choose two.)
- A. Manage Plans > Select each supply plan > Edit each supply plan > Manually add each exception specified by client
- B. Configure Exception Sets > Create exception set > Add exceptions specified by client
- C. Configure Exceptions > Expand Supply Planning Exceptions > Highlight lines with exceptions specified by client > Click 'Add to Exception Set'
- D. Manage Plans > Select each supply plan > Edit each supply plan > Add your exception set to Plan Options for each supply plan
- E. Select 'Add to Supply Plan' button > Select which supply plans you want to have this group of exceptions
Answer: B,D
NEW QUESTION # 47
Cost accounting captures costed transactions that are picked up by the cost processor. Which is not picked up by the cost processor?
- A. supplier invoices interfaced from Cloud Payables
- B. invoices and revenue interfaced from Cloud Receivables
- C. shipping, receiving, and inventory transactions from manufacturing
- D. period close adjusting journal entries for Payroll
Answer: B
NEW QUESTION # 48
A customer would like to account for the production loss in the supply planning process using the item shrinkage rate planning specification.
Which statement reflects the system behavior to meet this requirement?
- A. Planning process reduces the demand based on shrinkage factor and keeps the supply quantity as is.
- B. Planning calculation creates scrap demand to compensate for loss and maintains supply.
- C. Planning calculation does not support shrinkage functionality.
- D. Planning calculates no additional demand but creates the additional required supply based on shrinkage factor.
Answer: B
NEW QUESTION # 49
What is one method of associating a Safety Stock Quantity value to an item?
- A. Enter your value in the Safety Stock Quantity column in the Items page.
- B. Upload the value using File Based Data Import (FBDI)
- C. Run the Safety Stock Quantity Update Process.
- D. Enter your value in the Safety Stock Quantity Override column in the Items page.
Answer: A
NEW QUESTION # 50
......
Oracle 1z0-1066-23 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
Use Valid New 1z0-1066-23 Test Notes & 1z0-1066-23 Valid Exam Guide: https://www.passreview.com/1z0-1066-23_exam-braindumps.html
1z0-1066-23 exam torrent Oracle study guide: https://drive.google.com/open?id=1ZbUu_BiIgLUn2OeyQ3obCCFUYiqlt2PP