[Oct-2021] Study resources for the Valid HPE6-A80 Braindumps!
Updated HPE6-A80 Tests Engine pdf - All Free Dumps Guaranteed!
NEW QUESTION 30
What is one piece of additional information architects should obtain from the customer before they design the wireless solution?
- A. the distance between the locations where cameras will be installed and the wiring closet on each floor
- B. the average number of users per loT device
- C. the authentication and encryption capabilities for loT devices and security cameras
- D. the power requirements for the wireless loT devices and security cameras
Answer: A
NEW QUESTION 31
A customer has multiple medium and large branch sites, eacri of which requires between S ana 16 APs and supports between 200 and 600 wireless clients, Every branch site has an Internet connection, which it uses to reach the central data center. The customer would prefer the WAN links to be optimized in the solution.
Different use cases require SSID's for tunneled traffic from remote sites to central location, traffic that must remain local on the remote site, and traffic which would need to egress out from remote site Internet connection.
Which branch office solution best meets the customer needs?
- A. IAPs with branch office controllers
- B. lAPs with Aruba central
- C. RAPs and branch office controllers
- D. CAPS and branch office controllers
Answer: B
NEW QUESTION 32
Refer to the exhibit.
This warehouse has the dimensions shown in the exhibit. The warehouse is 20 feet (6 m) high up to a steel railing on the celling. The shelves are about 16 feet (5m) high, and they hold large containers filled with fluid and metal equipment.
The customer needs consistent wireless coverage throughout the warehouse, mostly to support the tablets that employees use to run Inventory tracking and other applications. The warehouse staff works in shifts of 20.
The architect has selected AP-515S. About how many APs should the architect propose?
- A. about 13-16
- B. about 6-8
- C. about 23-32
- D. about 6-4
Answer: B
NEW QUESTION 33
What is one customer requirement that can drive the need for a relatively dense AP deployment. In which ire coverage areas of at least three AP radios overlap?
- A. location tracking of wireless loT devices
- B. support for beacon management
- C. AP operation as hybrid AMs for IDS/WIPS
- D. the deployment of dual SGHz radio APs
Answer: B
NEW QUESTION 34
Match each hospital room with a potential issue for the AP design (Each match will be used once. )
Answer:
Explanation:
NEW QUESTION 35
Refer to the exhibit.
The exhibit shows the topology for a new Aruba solution. The MCs are in a ctuster and support all of the wireless traffic in the network The core switches route all traffic and support all VLANS. The access fayer switches do NOT use tunneiednode. or dynamic segmentation.
The customer has indicated that it has these VLANS for user devices.
* VLAN 11 for Floori employee wired devices
* VLAN 12 for Floor 2 employee wired devices
* VLAN 13 tor Floor 3 employee wired devices
* VLAN 14 for Floor 4 employee wired devices
* VLAN 15 for Floor 5 employee wired devices
* VLAN 101 for all employee wireless devices
* VLAN 102 for all guest wireless devices
In which locations should the architect plan the VLANs?
- A. VLANs 11-15 on one MC. VLANs 101 and 102 on the other MC. (Other VLANs will be used on the access layer switches.)
- B. VLANs 11-15. 101. and 102 on both MCs. (Other VLANs will be used on the access layer switches.)
- C. VLANS 11-15 on the access layer switches on the corresponding floor; VLANS 101 and 102 on both MCS.
- D. VLANs 11-15 on the access layer switches on the corresponding floor; VLAN 101 on one MC and VLAN 102 on me other MC
Answer: D
NEW QUESTION 36
Refer to the exhibit.
A company needs a new wireless solution for its multi-site network. All branch sites must connect to the main site through secure tunnels over the Internet. The customer requires full redundancy for the Mobility Controllers (MC). Including stateful faiEoverand seamless roaming for the main site.
The architect plans to propose:
- 500 RAPS
- 100 APs at the main campus
- two 7205 MCs
- two 7210 MCS
- one MM appliance
The exhibit snows the existing wired network at the main site, which has a single building with two large floors.
Following the best-practices on design, performance and security, where should the architect plan to connect the MCs?
{Potential locations are numbered in the exhibit.)
- A. one 7205 MC at 3 and one at 4; two 7210 MCs at 1
- B. all of the MCs at 2
- C. two 7205 MCs at 2; two 7210 MCs at 1
- D. two 7205 MCS at 1; two 7210 MCS at 2
Answer: B
NEW QUESTION 37
Refer to the exhibit.
A customer has the wined infrastructure shown in the exhibit. The customer is in the process of expanding their wireless services They will now add a new wireless solution, with mobility controllers (MCs) connected as shown. The new wireless solution will support a total of 450 APs and about 26,000 wireless devices. It must provide seamless roaming across the entire campus.
After the new deployment, both wired and wireless devices experience IP connectivity issues.
Which change to the existing infrastructure should the architect recommend to support all of the customer requirements?
- A. The wired VLANS should be combined into a single VLAN and n6 subnet
- B. The core and aggregation switches should disable Virtual Switching Framework (VSF).
- C. The MCs should be moved to the aggregation layer, and more MCs added
- D. The core switches should be replaced with switches that have larger ARP tables.
Answer: B
NEW QUESTION 38
A customer has a large network, which includes a main site and many branch sites. The network has a total of about 10.000 wireless devices at the main site and 15,000 wireless devices total at branches.
To fulfill the requirements for a wireless network upgrade, the architect plans to propose;
* 2 7205 MCs at the main site
* 2 7210 MCs at the main site
* 10 7030 MCs at branch sites
* 200 RAPs at branch sites
* 500 CAPS at the main site
* 300 CAPS at branch sites
What is the most cost-effective Mobility Master solution that meets the requirements'?
- A. MM-HW-1K appliance
- B. MM-HW-5K appliance + MM-HW-5k appliance
- C. MM-HW-1OK appliance
- D. MM-HW-5K appliance
Answer: B
NEW QUESTION 39
A company has several remote sues that operate more or less autonomously. Each site has ns own local services and Internet connection However the company does have a main office with a few centralized resources that the company would like to make available to remote office employees over the Internet connection. Sites range in size and require between 10 and 20 APs.
The customer requires the most cost-effective solution that meets the requirements.
Which solution should the architect recommend for each remote site?
- A. an IAP cluster with an IPsec tunnel to a main office MC
- B. Campus APs (CAPS) with CPSec control channels to a main office MC
- C. Remote APs (RAPs) with IPsec tunnels to a main office MC
- D. Campus APs (CAPs) with a local MC that has an SD-WAN license
Answer: D
NEW QUESTION 40
Refer to the exhibit.
The exhibit shows the current AP deployment In a warehouse that stores frozen food goods:
* APs are mounted on the ceiling, which is 15 feet (4.6 m) high.
* Shelves are 12 feet (3.7 m) high and are typically fully stocked.
This customer indicates that their current wireless performance is inadequate.
What should the network architect include in the new solution to resolve this issue?
- A. APs deployed with directional antennas and a hybrid wall-mount, ceiling-mount design
- B. APs deployed on the ceiling in each aisle, due to the high absorption between aisles
- C. APs deployed with directional antennas on the ceiling, due to the high 15-foot callings
- D. APS deployed on the ceiling in the same current locations, out with dual 5GHz radios
Answer: B
NEW QUESTION 41
Refer to the exhibit.
The network architect has created the 60M shown in the exhibit tor a complete new wired ana wireless solution for a customer. This solution the customer wants to discover and manage every component or the network in Airwave, including twins, MCS, APS, and switches.
How many AirWave licenses dees the architect need to add?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 42
A customer requires new MCs for a large multi-site network with about 600 AP-535S ana 30,000 wireless clients. The customer requires redundancy for the MCs, with each MC being able to handle the full toad in a failover situation The network should be able to sustain the loss of a controller with stateful failover within seconds. It should be able to undergo software upgrades without downtime.
The architect has recommended two 7240XM MCs. The customer points out that 7220 MCs can support their requirements and wonders why the architect recommended me 7240XMS.
What should the architect explain?
- A. The 7240XM MCs are required to support the large number of wireless clients in this network
- B. The 7240XM MCs have better redundant power supplies and fan tray component capabilities than 7220 MCs.
- C. The 724QXM MCs can support full CPSec tunnels with this number of APs. while the 7220 MCs cannot.
- D. The 7240XM MCS provide a higher number of concurrent GRE tunnels to support 600APs with MCS in L2 clustering.
Answer: A
NEW QUESTION 43
An indoor sports stadium has 5.000 seats in two rings:
* The stadium has a ceiling height of 72 feet (22 m).
* There is a catwalk around the perimeter of me stadium that is 54 feet (13 m) from me floor.
* There are two scoreboards at either end of the stadium
* The construction of the stadium is concrete and steel.
The customer has indicated a preference for overhead coverage, and the wireless network should support 3500 concurrent clients. The architect plans to install the APs on the catwalk to service sections of the floor below Which type or antennas are recommended for the APS that provide the overhead coverage?
- A. downtilt
- B. vagi
- C. high gain directional
- D. high gain omnidirectional
Answer: C
NEW QUESTION 44
For which scenario do Aruba CX 6300M Series switches meet the needs for an upgrade of the wired access layer while the Aruba CX 630QF Series switches do not?
- A. The Aruba CX6300M supports 10GBase-T connectivity with AP-515.
- B. The Aruba CX 630DM support up to 75W PoE+ per port
- C. The customer wants to utilize the Aruba AP-515 support for 002 3bz connectivity.
- D. The customer wants to utilize LACP on AP515 in VSF switch configuration.
Answer: B
NEW QUESTION 45
A customer has an existing Aruba wireless solution at their campus. This solution is shown in the exhibit.
The customer now wants to enhance seamless roaming and failover across the solution. The customer wants the least expensive solution that still meets the needs.
Which figure shows the correct changes to the solution to meet the new needs?
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: C
NEW QUESTION 46
Refer to the exhibit.
A customer has these availability requirements;
* loss of one controller with stateful failover and without impact on wireless client connectivity
* loss of one core switch without loss of connectivity for any endpoints or APs in the building
* loss of any one switch-lo-switch or MC-to-switch link without loss of connectivity for any endpoints or APS in the building and with minimal impact on infrastructure functionality
* loss of any one access switch with minimal impact to wireless client connectivity The exhibit shows the current plan for the topology.
Which change should the architect make to the plan to provide better support for the customers availability requirements?
- A. Change the 40GbE DAC on the 8400 switch to a stacking cable with stacking module.
- B. Use two 40GBE DACs between the core V3X switches for their switch links.
- C. Add VLANs 11 and 15 to the MC connections to ensure both MCS can manage any of the APS.
- D. Add 120 additional AP licenses, so that each MC can support ail the APs, even if the other MC fails.
Answer: D
NEW QUESTION 47
Refer to the exhibit.
A customer needs a wired upgrade for a building on its main campus. The exhibit shows the switches that the architect has selected for each closet and me existing cabling. The customer is not open to changing the cabling.
The customer requires link redundancy for the uplinks from each closet and for the links from the building to the core. In non link failure situations, the uplinks from each closet must support at least 20Gbps, and the building as a whole must have at least 20 Gbps to the core in non link failure situations Which two options Tor connecting the closets to the network core are valid? (select two.)
- A. Connect me Floor 2 switch stack to Floor 1 with two fiber connections, DO me same for Floor 3. connect the Floor 1 switch stack to the network cone with two fiber connections.
- B. Add two aggregation switches in the Floor 1closet. Connect the switch stack for each closet to the aggregation switches on two fiber links each and the aggregation switches to the core on two fiber links.
- C. Connect the switch stack on each floor directly to the network cone on two "fiber connections per floor. Achieve this by patching the inter-floor fiber through to the inter-building fiber.
- D. Combine the nine switches on the three floors into a single switch stack with the MM QM3 fiber cables in a ring topology. Connect two Floor 1 members to the network core with one fiber connection each.
- E. Combine the nine switches on all three floors into a single switch slack with stacking cables in a ring topology.
Connect two Floor f members to the network core with one fiber connection each
Answer: B,C
NEW QUESTION 48
Refer to the exhibit.
A customer needs to support resilient wireless services
What is one way that this design helps to minimize me impact of a railed access layer switch on these services?
- A. The 8400s and G405s use Virtual Switching Extension (VSX) in cone and access.
- B. The switches support Smart Rate and dual home AP connections.
- C. Each access layer switch has two redundant links to the core.
- D. APS in the same area connect to different switches.
Answer: B
NEW QUESTION 49
......
HPE6-A80 Dumps Updated Practice Test and 62 unique questions: https://www.passreview.com/HPE6-A80_exam-braindumps.html
Latest Aruba Certified Design Expert (ACDX) HPE6-A80 Actual Free Exam Questions: https://drive.google.com/open?id=1cepPiYlzYZ2pojUDmvsf8QNUwWxuFaWH