Guaranteed Success in CCA-AppDS 1Y0-241 Exam Dumps
Citrix 1Y0-241 Daily Practice Exam New 2021 Updated 65 Questions
Main 1Y0-241 Exam Details
Citrix 1Y0-241 brings a maximum of 64 questions, some of which may be unscored, and the passing mark is 61%. The time limit for this exam is not the same for all applicants. For instance, native English speakers will have a maximum of 90 minutes to complete the test, with no extension granted when this period elapses. On the other hand, non-native English speakers who may want to take the exam from a country where English is purely a foreign language will have the regular 90 minutes along with additional 30 minutes that are given automatically. Lastly, non-native English speakers from English-speaking countries will get the same extension (30 minutes) but only after getting approval from Citrix.
Difficulty in writing Citrix 1Y0-241: Deploy and Manage Citrix ADC 13 with Traffic Management Exam
There are many problems a Candidate faced when Candidates start preparing for the Citrix 1Y0-241 exam. If a candidate wants to prepare for the Citrix 1Y0-241 exam without any problem and get good grades in the exam. Then they have to choose the best Citrix 1Y0-241 dumps for real exam questions practice. Many websites are offering the latest Citrix 1Y0-241 exam questions and answers but these questions are not verified by Citrix certified experts and that’s why many are failed in their just first attempt. PassReview is the best platform which provides the candidate with the necessary Citrix 1Y0-241 questions that will help him to pass the Citrix 1Y0-241 exam the first time. The candidate will not have to take the Citrix 1Y0-241 exam twice because with the help of Citrix 1Y0-241 exam dumps the candidate will have every valuable material required to pass the Citrix 1Y0-241 exam. We are providing the latest Citrix 1Y0-241 practice test and that is the reason why this is the one that he needs to use and there are no chances to fail when a candidate will have valid dumps from PassReview. We have the guarantee that the questions that we have will be the ones that will pass candidates in the Citrix 1Y0-241 exam on the very first attempt.
NEW QUESTION 28
A Citrix Administrator needs to configure a Citrix ADC high availability (HA) pair with each Citrix ADC in a different subnet.
What does the administrator need to do for HA to work in different subnets?
- A. Turn on Independent Network Configuration (INC) mode.
- B. Configure SyncVlan
- C. Turn on HA monitoring on all interfaces
- D. Turn on fail-safe mode.
Answer: A
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/system/high-availability-introduction/ configuring-high-availability-nodes-different-subnets.html
NEW QUESTION 29
Scenario: A Citrix Administrator executed the command below in an active-active, global server load balancing (GSLB) setup.
set gslb parameter -ldnsprobeOrder DNS PING TCP
The order to calculate the _____ for dynamic proximity will be the DNS UDP query followed by the ping and then TCP. (Choose the correct option to complete the sentence.)
- A. Empty Domain Service (EDS)
- B. Time to live (TTL)
- C. Round-trip time (RTT)
- D. Multiple IP responses (MIR)
Answer: C
NEW QUESTION 30
A Citrix Administrator needs to configure a Citrix ADC high availability (HA) pair with each Citrix ADC in a different subnet.
What does the administrator need to do for HA to work in different subnets?
- A. Turn on Independent Network Configuration (INC) mode.
- B. Configure SyncVlan
- C. Turn on HA monitoring on all interfaces
- D. Turn on fail-safe mode.
Answer: A
NEW QUESTION 31
Scenario:
POLICY 1:
add rewrite action ACT_1 corrupt_http_header Accept-Encoding
add rewrite policy POL_1 HTTPS.REQ.IS_VALID ACT_1
POLICY 2:
add rewrite action ACT_2 insert_http_header Accept-Encoding "\"identity\"" add rewrite policy POL_2 "HTTP.REQ.IS_VALID " ACT_2 How can a Citrix Administrator successfully bind the above rewrite policies to the load-balancing vServer lb_vsrv so that POL_2 is evaluated after POL_2 is evaluated?
- A. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -type REQUEST
- B. bind lb vServer lb_vsrv -policyName POL_1 -priority 110 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
- C. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
- D. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression END -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 80 -gotoPriorityExpression NEXT -type REQUEST
Answer: B
NEW QUESTION 32
Scenario: A Citrix Administrator needs to configure a Responder policy, so that the string "/mytraining" is added to every URL path received.
The administrator should use these commands to accomplish this:
>add responder action Redirect_Act redirect "HTTP.REQ.URL.PATH_AND_QUERY+\"mytraining\"" - responseStatusCode 302
>add responder policy Redirect_Pol___________Redirect_Act
>bind lb vServer lb_vsrv_www -policyName Redirect_Pol -priority 100 -gotoPriorityExpression END - type_______ (Choose the correct option to complete the set of commands.)
- A. "(HTTP.REQ.URL.STARTSWITH(\"mytraining\"))"
RESPONSE - B. "(HTTP.REQ.URL.STARTSWITH(\"mytraining\"))"
REQUEST - C. "!(HTTP.REQ.URL.ENDSWITH(\"mytraining\"))"
RESPONSE - D. "!(HTTP.REQ.URL.ENDSWITH(\"mytraining\"))"
REQUEST
Answer: A
NEW QUESTION 33
Scenario: A Citrix Administrator is managing a Citrix Gateway with a standard Platform license and remote employees in the environment. The administrator wants to increase access by 3,000 users through the Citrix Gateway using VPN access.
Which license should the administrator recommend purchasing?
- A. Citrix ADC Upgrade
- B. Citrix ADC Burst Pack
- C. Citrix Gateway Express
- D. Citrix Gateway Universal
Answer: D
NEW QUESTION 34
Scenario: A Citrix Administrator configured a responder policy as follows:
> add responder action Redirect_Act respondwith
"DIAMETER.NEW_REDIRECT(\"aaa://host.example.com\")"
> add responder policy Redirect_Pol "diameter.req.avp(264).value.eq(\"host1.example.net\")" Redirect_Act
> bind lb vServer vs1 -policyName Redirect_Pol -priority 10 -type REQUEST What will be the effect of this configuration?
- A. Response originated from "host1.example.net" will be redirected to "host.example.com".
- B. Response originated from "host.example.net" will be redirected to "host1.example.com".
- C. Request originated from "host.example.net" will be redirected to "host1.example.com".
- D. Request originated from "host1.example.net" will be redirected to "host.example.com".
Answer: D
NEW QUESTION 35
Which feature can a Citrix Administrator use to create a consistent set of front-end SSL parameters across multiple SSL vServers?
- A. SSL policy
- B. SSL multiplexing
- C. SSL bridge
- D. SSL profile
- E. SSL policy
Answer: D
NEW QUESTION 36
Scenario: A Citrix Administrator executed the following command in a global server load balancing (GSLB) environment:
set gslb site SiteB -triggerMonitor MEPDOWN
What will be the effect of this command on the default service monitoring behavior on a remote site?
- A. The service monitor will take precedence over Metric Exchange Protocol (MEP).
- B. The service monitor is invoked only when Metric Exchange Protocol (MEP) has marked the service as DOWN.
- C. The service monitor is invoked only when Metric Exchange Protocol (MEP) connectivity has been lost between Site A and Site B.
- D. The state of the GSLB service will always be controlled by Metric Exchange Protocol (MEP).
Answer: B
NEW QUESTION 37
Scenario: A Citrix ADC receives packets destined for a MAC address owned by the Citrix ADC. The destination IP address of the packets does NOT belong to the Citrix ADC. Layer 3 mode is enabled by default on the Citrix ADC.
The Citrix ADC will __________ the packets in this scenario. (Choose the correct option to complete the sentence.)
- A. drop
- B. process
- C. route
- D. bridge
Answer: C
Explanation:
Explanation/Reference:
Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/getting-started-with-citrix-adc/configure- system-settings/configure-modes-packet-forwarding.html
NEW QUESTION 38
Scenario: A Citrix ADC is configured with Interface 1/1 and bound to VLAN 40. A Citrix Administrator executed the below command:
> bind vlan 10 -ifnum 1/1
What is the result of executing this command on the Citrix ADC?
- A. Interface 1/1 is bound to VLAN 20, and native VLAN is 40.
- B. Interface 1/1 is bound to VLAN 20, and native VLAN is 20.
- C. Interface 1/1 is bound to VLAN 20, and native VLAN is 1.
- D. Interface 1/1 is bound to VLAN 20, and native VLAN is NOT changed.
Answer: D
NEW QUESTION 39
Scenario: A load-balancing vServer is configured to utilize the least bandwidth load-balancing method. A service attached to this vServer is brought into the effective state during production hours.
During the startup of a vServer, which load-balancing method is used by default?
- A. Round-robin
- B. Least bandwidth
- C. Least connections
- D. Custom load
Answer: C
NEW QUESTION 40
A Citrix Administrator configured global server load balancing (GSLB) for www.citrix.com, with two ADNS services named Citrix ADC 1 and Citrix ADC 2 in the setup.
Which record does the administrator need to add on the parent DNS server to delegate requests from www.citrix.com to Citrix ADC 1 and Citrix ADC 2?
- A. Canonical Name (CNAME)
- B. Address (A) record
- C. Pointer Record (PTR)
- D. Name Server (NS) record
Answer: D
NEW QUESTION 41
Which mode does a Citrix Administrator need to configure to allow a Citrix ADC to control the packetforwarding function based on the route table lookups?
- A. USIP
- B. Layer 2
- C. MBF
- D. Layer 3
Answer: D
NEW QUESTION 42
Scenario: A Citrix Administrator configured Citrix ADC load balancing to send requests to one of three identical backend servers. Each server handles multiple protocols, and load balancing is set up in round-robin mode.
The current load-balancing setup on the Citrix ADC is:
* One load-balancing vServer with one externally accessible VIP
* One service created for each protocol type
* One server entity for each backend resource
During business hours, the administrator wants to make changes to one backend server without affecting the other servers.
What is the most efficient way for the administrator to ensure that all traffic is routed away from the server without impeding responses from other resources?
- A. Disable the backend service entity targeted for change.
- B. Disable the backend server entity targeted for change.
- C. Disable the load-balancing vServer.
- D. Unbind the correct server entity from the load-balancing vServer.
Answer: C
NEW QUESTION 43
Scenario: The primary content switching vServer has gone down. To troubleshoot, a Citrix Administrator has issued the following command:
> show csvserver CSV
CSV (10.1.100.100:443) - HTTPS Type: CONTENT
State: UP
Last state change was at Mon Jun 29 15:20:43 2020
Time since last state change: 1 day, 06:47:58 610
Client Idle Timeout: 180 sec
Down state flush: ENABLED
Disable Primary vServer On Down: DISABLED
Appflow logging: ENABLED
Port Rewrite: DISABLED
State Update: DISABLED
Default: Content Precedence: URL
vServer IP and Port insertion: OFF
Persistence:
NONE redirect: http://www.site1.com/mysite1/maintenance
Backup: vServer-LB-2
Listen Policy: NONE
IcmpResponse: PASSIVE
RHIstate: PASSIVE
Traffic Domain: 0
Based on this output, where will the subsequent request be redirected?
- A. 10.1.100.100:443
- B. http://www.site1.com/mysite1/maintenance
- C. vServer-LB-2
- D. Backup content switching vServer
Answer: B
NEW QUESTION 44
Which two steps are necessary to configure global server load balancing (GSLB) service selection using content switching (CS)? (Choose two.)
- A. Bind the GSLB domain to the GSLB vServer.
- B. Configure CS policies that designate a load-balancing vServer as the target vServer.
- C. Bind the domain to the CS vServer instead of the GSLB vServer.
- D. Configure a CS vServer of target type GSLB.
Answer: B,D
NEW QUESTION 45
Scenario: A Citrix Administrator manages an environment that has a Citrix ADC high availability (HA) pair running on two MPX appliances. The administrator notices that the state of the secondary Citrix ADC is
'Unknown'.
What is causing the secondary state to be 'Unknown'?
- A. The administrator made both Citrix ADCs primary.
- B. TCP port 22 is disabled between the primary and secondary ADCs.
- C. The remote procedure call (RPC) nodes are incorrectly configured.
- D. The synchronization on the secondary appliance is disabled.
Answer: C
NEW QUESTION 46
......
Test Engine to Practice 1Y0-241 Test Questions: https://www.passreview.com/1Y0-241_exam-braindumps.html
Use Valid 1Y0-241 Exam - Actual Exam Question & Answer: https://drive.google.com/open?id=1vzlkQ6emjnB6jCMs_QDNBPYXPevkcwFS