Authentic Best resources for 156-315.80 Test Engine Practice Exam
[2022] 156-315.80 PDF Questions - Perfect Prospect To Go With PassReview Practice Exam
How much 156-315.80 Exam Cost
The price of The price of the 156-315.80 exam is $250 USD.
NEW QUESTION 248
To enable Dynamic Dispatch on Security Gateway without the Firewall Priority Queues, run the following
command in Expert mode and reboot:
- A. fw ctl multik set_mode 4
- B. fw ctl multik set_mode 1
- C. fw ctl Dyn_Dispatch on
- D. fw ctl Dyn_Dispatch enable
Answer: A
NEW QUESTION 249
Which web services protocol is used to communicate to the Check Point R80 Identity Awareness Web API?
- A. XLANG
- B. XML-RPC
- C. SOAP
- D. REST
Answer: D
Explanation:
The Identity Web API uses the REST protocol over SSL. The requests and responses are HTTP and in JSON format.
Reference: https://sc1.checkpoint.com/documents/R80.10/WebAdminGuides/EN/ CP_R80.10_IdentityAwareness_AdminGuide/html_frameset.htm?topic=documents/R80.10/WebAdminGuides/ EN/CP_R80.10_IdentityAwareness_AdminGuide/148699
NEW QUESTION 250
What is true about VRRP implementations?
- A. You cannot have a standalone deployment
- B. VRRP membership is enabled in cpconfig
- C. You cannot have different VRIDs in the same physical network
- D. VRRP can be used together with ClusterXL, but with degraded performance
Answer: A
Explanation:
Reference:
https://sc1.checkpoint.com/documents/R76/CP_R76_Gaia_WebAdmin/87911.htm
NEW QUESTION 251
To fully enable Dynamic Dispatcher with Firewall Priority Queues on a Security Gateway, run the following command in Expert mode then reboot:
- A. fw ctl Dynamic_Priority_Queue enable
- B. fw ctl multik set_mode 1
- C. fw ctl Dynamic_Priority_Queue on
- D. fw ctl multik set_mode 9
Answer: D
Explanation:
References:
NEW QUESTION 252
Which remote Access Solution is clientless?
- A. Endpoint Security Suite
- B. Mobile Access Portal
- C. SecuRemote
- D. Checkpoint Mobile
Answer: B
Explanation:
Explanation/Reference: https://sc1.checkpoint.com/documents/R77/CP_R77_Firewall_WebAdmin/92708.htm
NEW QUESTION 253
Which of the following is NOT an attribute of packet acceleration?
- A. VLAN tag
- B. Protocol
- C. Destination port
- D. Source address
Answer: A
Explanation:
Connections are identified by the 5 tuple attributes: source address, destination address, source port, destination port, protocol. When the packets in a connection match all the 5 tuple attributes, the traffic flow can be processed on the accelerated path.
NEW QUESTION 254
Which command shows actual allowed connections in state table?
- A. fw tab -t connection
- B. fw tab -t StateTable
- C. fw tab connections
- D. fw tab -t connections
Answer: D
NEW QUESTION 255
As an administrator, you may be required to add the company logo to reports. To do this, you would save the logo as a PNG file with the name 'cover-company-logo.png' and then copy that image file to which directory on the SmartEvent server?
- A. SFWDIR/smartevent/conf
- B. $RTDIR/smartview/conf
- C. $FWDIR/smartview/conf
- D. $RTDIR/smartevent/conf
Answer: B
NEW QUESTION 256
With MTA (Mail Transfer Agent) enabled the gateways manages SMTP traffic and holds external email with
potentially malicious attachments. What is required in order to enable MTA (Mail Transfer Agent)
functionality in the Security Gateway?
- A. Traffic on port 25
- B. Threat Prevention Software Blade Package
- C. Endpoint Total Protection
- D. Threat Cloud Intelligence
Answer: B
NEW QUESTION 257
In the Check Point Firewall Kernel Module, each Kernel is associated with a key, which specifies the type of traffic applicable to the chain module. For Wire Mode configuration, chain modules marked with
__________________ will not apply.
- A. 0
- B. 1
- C. 2
- D. ffff
Answer: B
NEW QUESTION 258
When Configuring Endpoint Compliance Settings for Applications and Gateways within Mobile Access, which of the three approaches will allow you to contuju'1* individual policies for each application?
- A. Medium Approach
- B. Basic Approach
- C. Strong Approach
- D. Very Advanced Approach
Answer: A
NEW QUESTION 259
Which 3 types of tracking are available for Threat Prevention Policy?
- A. Syslog, None, User-defined scripts
- B. None, Log, Syslog
- C. SMS Alert, Log, SNMP alert
- D. Alert, SNMP trap, Mail
Answer: A
NEW QUESTION 260
Full in the blank: the command___________ provides the most complete restoration of a RBO configuration.
- A. upgrade_ import
- B. fwm dbimport -p <export file>
- C. cpinfo -recover
- D. cpconfig
Answer: A
NEW QUESTION 261
You have successfully backed up Check Point configurations without the OS information. What command would you use to restore this backup?
- A. import backup
- B. migrate import
- C. cp_merge
- D. restore_backup
Answer: B
NEW QUESTION 262
The following command is used to verify the CPUSE version:
- A. [Expert@HostName:0]#show installer status
- B. [Expert@HostName:0]#show installer status build
- C. HostName:0>show installer build
- D. HostName:0>show installer status build
Answer: D
Explanation:
References:
NEW QUESTION 263
Can multiple administrators connect to a Security Management Server at the same time?
- A. Yes, every administrator has their own username, and works in a session that is independent of other administrators.
- B. Yes, all administrators can modify a network object at the same time
- C. Yes, but only one has the right to write.
- D. No, only one can be connected
Answer: A
Explanation:
Explanation/Reference: https://sc1.checkpoint.com/documents/R80.20_M1/WebAdminGuides/EN/ CP_R80.20_M1_SmartProvisioning_AdminGuide/html_frameset.htm?topic=documents/R80.20_M1/ WebAdminGuides/EN/CP_R80.20_M1_SmartProvisioning_AdminGuide/16727
NEW QUESTION 264
Which process is used mainly for backward compatibility of gateways in R80.X? It provides communication with GUI-client, database manipulation, policy compilation and Management HA synchronization.
- A. fwm
D18912E1457D5D1DDCBD40AB3BF70D5D - B. cpd
- C. cpm
- D. fwd
Answer: A
NEW QUESTION 265
DLP and Geo Policy are examples of what type of Policy?
- A. Unified Policies
- B. Standard Policies
- C. Inspection Policies
- D. Shared Policies
Answer: D
Explanation:
References:
NEW QUESTION 266
Which of to the following is true about
- A. It is a full layer 3 VPN client
- B. It offers full enterprise mobility management
- C. It does not support all VPN authentication methods
- D. It is supported only on IOS phones and Windows PCs
Answer: B
NEW QUESTION 267
Capsule Connect and Capsule Workspace both offer secured connection for remote users who are using their mobile devices. However, there are differences between the two.
Which of the following statements correctly identify each product's capabilities?
- A. Workspace can support any application, whereas Connect has a limited number of application types which it will support.
- B. For credential protection, Connect uses One-time Password login support and has no SSO support, whereas Workspace offers both One-Time Password login support as well as SSO for specific applications.
- C. Workspace supports ios operating system, Android, and WP8, whereas Connect supports ios operating system and Android only
- D. For compliance/host checking, Workspace offers the MDM cooperative enforcement, whereas Connect offers both jailbreak/root detection and MDM cooperative enforcement.
Answer: B
NEW QUESTION 268
Using mgmt_cli, what is the correct syntax to import a host object called Server_1 from the CLI?
- A. mgmt._cli add object "Server-1" ip-address "10.15.123.10" --format json
- B. mgmt_cli add-host "Server_1" ip_address "10.15.123.10" --format txt
- C. mgmt_cli add host name "Server_1" ip-address "10.15.123.10" --format json
- D. mgmt_cli add object-host "Server_1" ip-address "10.15.123.10" --format json
Answer: C
Explanation:
Explanation
Example:
mgmt_cli add host name "New Host 1" ip-address "192.0.2.1" --format json
* "--format json" is optional. By default the output is presented in plain text.
NEW QUESTION 269
Using mgmt_cli, what is the correct syntax to import a host object called Server_1 from the CLI?
- A. mgmt._cli add object "Server-1" ip-address "10.15.123.10" --format json
- B. mgmt_cli add-host "Server_1" ip_address "10.15.123.10" --format txt
- C. mgmt_cli add host name "Server_1" ip-address "10.15.123.10" --format json
- D. mgmt_cli add object-host "Server_1" ip-address "10.15.123.10" --format json
Answer: C
Explanation:
Example:
mgmt_cli add host name "New Host 1" ip-address "192.0.2.1" --format json
* "--format json" is optional. By default the output is presented in plain text.
NEW QUESTION 270
Which utility allows you to configure the DHCP service on Gaia from the command line?
- A. ifconfig
- B. dhcp_ofg
- C. cpconfig
- D. sysconfig
Answer: D
NEW QUESTION 271
......
Best updated resource for 156-315.80 Online Practice Exam: https://www.passreview.com/156-315.80_exam-braindumps.html
Realistic Practice 156-315.80 Check Point Certified Security Expert - R80 Exam Braindumps: https://drive.google.com/open?id=1cANeM8ygD9dOZ6gus9VLucURFQWnuL_d