[2024] Pass your ACP-01101 exam with this 100% Free ACP-01101 Braindump
View All ACP-01101 Actual Exam Questions, Answers and Explanations for Free
NEW QUESTION # 38
(Note: This exam question rotors to the Shoot Sot Manager functionality in the Windows version and the Project Manager functionality in the Mac The Mac version appears in the parentheses.)
A CAD designer is working with a sheet set (project) The existing sheets (layouts) required are shown in the sheet set (project) in the exhibit.
The designer needs to add a new sheet (layout) from a different protect location, keeping the new sheet (layout) settings.
Which workflow should they use to add the new sheet (layout) to the existing shoot sot (project)?
- A. Create a new sheet subset (group)
- B. import a new layout from a default template.
- C. Import a new layout from the project drawing
- D. Create a new sheet (layout) In the sheet set (project)
Answer: C
Explanation:
* Open the Sheet Set Manager:
* Access the Sheet Set Manager from the 'View' tab on the ribbon or type SHEETSET in the command line.
* Navigate to the Desired Project:
* Ensure that the current project (sheet set) is selected in the Sheet Set Manager.
* Import a New Layout:
* Right-click on the sheet set or the appropriate subset (group) where you want to add the new sheet.
* Select Import Layout as Sheet from the context menu.
* Select the Source Drawing:
* In the 'Select Drawing' dialog, navigate to the project drawing that contains the layout you want to import.
* Select the layout(s) you wish to import and click Open.
* Confirm the Import:
* The imported layout(s) will now appear in the sheet set, retaining the original layout settings.
References:
* AutoCAD Documentation on the Sheet Set Manager: Sheet Set Manager
NEW QUESTION # 39
You have the drawing shown in the exhibit.
You need to place the polygon and the rectangle on the same layer as the circle.
Which command should you use to complete the task in the least number of steps?
- A. Copy
- B. Make Current (LAYMCUR)
- C. ByLayer
- D. Match Properties
Answer: D
Explanation:
Explanation
match properties is a command that allows you to apply the properties of one object to another object. You can use this command to change the layer of an object by selecting an object on the desired layer as a source.
To use this command, you can either:
* Click on the Match Properties icon in the Properties panel of the Home tab.
* Type MATCHPROP at the command prompt and press Enter.
Then, you can follow these steps:
* Select an object on the same layer as the circle as a source object and press Enter.
* Select the polygon and the rectangle as destination objects and press Enter.
Now you have placed the polygon and the rectangle on the same layer as the circle.
NEW QUESTION # 40
Refer to exhibit.
Exhibit 1:
Exhibit 2:
in Exhibit 1, a CAD designer is drawing a line, but the dimension input box to specify its length is missing Which function should be enabled to display the dimension input box shown in Exhibit 2?
- A. Dynamic Input
- B. Orthomode
- C. Polar Tracking
- D. Object Snap Tracking
Answer: A
Explanation:
The function that needs to be enabled to display the dimension input box while drawing a line is "Dynamic Input." This feature provides a command interface near the cursor, allowing you to input dimensions and commands directly where you are drawing.
* Dynamic Input:
* Effect: Displays input boxes for dimensions and commands near the cursor.
* Usage: Facilitates real-time input of lengths, angles, and other parameters directly while drawing.
* How to Enable:
* Command: DYNMODE
* Toggle: You can toggle Dynamic Input on or off using the F12 key or by typing DYNMODE and setting it to 1.
NEW QUESTION # 41
Your company asks you to research alternative editable CAD formats to export to for non-AutoCAD users.
Which three alternative CAD file formats can be exported from AutoCAD? (Select 3)
- A. STL
- B. IAM
- C. BMP
- D. RVT
- E. DWF
Answer: A,B,E
Explanation:
Explanation
https://knowledge.autodesk.com/support/revit/learn-explore/caas/CloudHelp/cloudhelp/2022/ENU/Revit-Docum
NEW QUESTION # 42
Which two objects support associative dimensions? (Select 2)
- A. Images
- B. Polylines
- C. Arcs
- D. Hatches
Answer: B,C
Explanation:
associative dimensions adjust to changes in the geometric objects they measure. Dimension associativity defines the relationship between geometric objects and the dimensions that give their distance and angles.
Based on 2 and 3, dimensions in a layout may be associated to objects in model space when the DIMASSOC system variable is set to 2.
NEW QUESTION # 43
You are using the HATCH command in a drawing. You select the internal point that corresponds with the X as shown in the following exhibit.
Move each setting from the list on the left to the corresponding result on the right.
Answer:
Explanation:
Explanation:
Box 1 = ignore island detection
Box 2 = Outer island detection
https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2021/ENU/AutoCAD
NEW QUESTION # 44
Refer to the exhibit.
The exhibit shows a plan view of an office arrangement. There is also a table of area of each room areas, which displays the area of each room highlighted with a bold polyline.
The room number labels in the plan are denoted by blocks; made up of a rectangle and a room number attribute.
Which entity in the drawing is used to put the graphical representation of the room number in the Room No.
column in the table?
- A. Rectangle and text
- B. Block
- C. Single line text
- D. Attribute
Answer: D
Explanation:
Explanation
a block attribute is a tag or label that attaches data to a block. The data can be extracted and displayed in a table. Therefore, the entity in the drawing that is used to put the graphical representation of the room number in the Room No. column in the table is B. Attribute.
http://autocadtip.com/how-to-create-block-attribute-in-autocad.html
NEW QUESTION # 45
Exhibit
The viewport scales in the title block shown are field value as extracted from the properties of each viewport.
When using the Insert Field command to edit the text value and generate the viewport scale, which object property should you use, if the default scale list is being used?
- A. Object name
- B. Visual style
- C. Standard scale
- D. Display locked
Answer: C
Explanation:
The object property that you should use when using the Insert Field command to generate the viewport scale, if the default scale list is being used, is the "Standard scale".
The "Standard scale" property is used to specify the standard scale factor for the viewports. It represents a value in the format of 1:n, where n is the scale factor. For example, if you set the standard scale to 1:50, the viewport will display objects at a scale of 50 units per drawing unit.
To use this property in the Insert Field command, you can select "Object" in the "Field category" dropdown and "Standard scale" from the "Field names" dropdown. This will insert a field code that will automatically update the viewport scale based on the properties of the viewport.
NEW QUESTION # 46
Refer to the exhibit.
The exhibit shows a set of ornamental garden stairs going up to a walkway as part of a landscaping design.
You need to make sure that the edge of the top step in shown in a different linetype, as shown by the dashed line in the exhibit.
Which prompt in the OFFSET command should you use?
- A. Current
- B. Source
- C. Through
- D. Erase
Answer: A
Explanation:
Explanation
The Current prompt should be used to make sure that the edge of the top step is shown in a different linetype, as shown by the dashed line in the exhibit. This way, you can set a different linetype for your current layer before using the OFFSET command4.
https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2021/ENU/AutoCAD
NEW QUESTION # 47
You have two viewports at different viewport scales as shown in the exhibit. The geometry and dimensions were created in model space.
The viewport scales are 1 16 and 1:5. The dimension text height is the same for both viewports in the layout.
Evaluate the graphic and complete the statements by selecting the correct options from the drop-down lists.
Answer:
Explanation:
Explanation:
Box 1 = annotative
an annotative dimension style is a dimension style that automatically adjusts the size of dimensions based on the viewport scale. An annotative dimension style has an icon next to its name in the Dimension Style Manager dialog box. The dimension style is annotative because the dimension text height is the same for both viewports in the layout, even though they have different viewport scales1.
Box 2 = associativeThe DIMASSOC is at its default value of 2, therefore the dimensions are associative because they are linked to and update with the measured geometry3.
NEW QUESTION # 48
Drawings from different sources have been combined and resulted in duplicate background elements that are slightly offset from each other Some of the layer names match and other layers have an E prefix, indicating that they are existing.
To clean up the drawing, the Overkill (OVERKILL) command is used.
Which two settings will resolve the duplicate background and offsetting issues? (Select 2)
- A. Ignore Layer object property
- B. Ignore Color object property
- C. Ignore Transparency
- D. Tolerance value
- E. Maintain associative objects
Answer: A,D
Explanation:
Explanation
You need to ignore layer object property to remove duplicates that have different layer names but are otherwise identical4. You also need to set a tolerance value that is larger than the offset distance between the objects5.
NEW QUESTION # 49
You need to convert the two sets of parallel lines shown in 1 into the objects shown in 2 without repeating the command.
What should you use?
- A. The FILLET command with the Polyline option
- B. The CHAMFER command with the Polyline option
- C. The FILLET command with the Multiple option
- D. The CHAMFER command with the Multiple option
Answer: D
Explanation:
Explanation
According to the AutoCAD for Design and Drafting documents, the CHAMFER command creates a beveled corner between two lines, while the FILLET command creates a rounded corner between two lines. Both commands can be used with the Polyline option to apply chamfers or fillets to all corners of a 2D polyline1.
However, in this case, the lines are not polylines but separate line segments. Therefore, using the Polyline option will not work. Instead, you can use the Multiple option to chamfer or fillet multiple sets of lines without restarting the command2.
NEW QUESTION # 50
Refer to exhibit.
Viewport A was copied to create Viewport B in the same layout.
Viewport B needs to display the trail system in blue and all other content as gray as shown.
Which changes should the CAL) designer make to display the linework in Viewport b as requested?
- A. Create a property filler group to assign the correct colors to the layer
- B. Change the VP layer colors as requested
- C. Force the color of the trees and trail in model space for each viewport
- D. Change the layer colors as requested
Answer: B
Explanation:
To achieve the desired appearance where the trail system is blue and all other content is gray in Viewport B, the designer needs to utilize the viewport layer properties.
* Open the Layer Properties Manager:
* Type LAYER in the command line and press Enter.
* Modify VP Layer Colors:
* In the Layer Properties Manager, find the layers that need to be changed (the trail system and other content layers).
* Select the specific viewport (Viewport B) from the "Viewport Overrides" column.
* Change the Colors for Viewport B:
* For the trail system layer, set the color to blue.
* For all other layers, set the color to gray.
* This can be done by double-clicking the color cell in the "VP Color" column and selecting the desired color.
* Apply Changes:
* Close the Layer Properties Manager after making the necessary changes. The viewport overrides will apply, showing the trail system in blue and other content in gray in Viewport B.
NEW QUESTION # 51
You need to configure the layout viewports shown in the exhibit.
Which three methods can you use to create the viewports in a layout tab? (Select 3)
- A. Create a new page setup.
- B. From the Viewports dialog box: select a viewport configuration.
- C. From the View Manager dialog box, generate named views and add them as layout viewpoints.
- D. Clip a viewport to multiple different shapes by using the VPCLIP command.
- E. Create individual viewports by using the MVIEW command.
Answer: B,C,E
Explanation:
a layout viewport is a window that displays a view of model space on a layout tab. You can create multiple layout viewports to display different views of your model at different scales.
To create the viewports in a layout tab, you can use three methods:
* From the Viewports dialog box: select a viewport configuration
* Create individual viewports by using the MVIEW command
* From the View Manager dialog box, generate named views and add them as layout viewpoints These methods will allow you to create and arrange viewports on your layout tab.
https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2018/ENU/AutoCAD
NEW QUESTION # 52
Refer to the exhibit.
The exhibit shows a set of ornamental garden stairs going up to a walkway as part of a landscaping design.
You need to make sure that the edge of the top step in shown in a different linetype, as shown by the dashed line in the exhibit.
Which prompt in the OFFSET command should you use?
- A. Current
- B. Source
- C. Through
- D. Erase
Answer: A
Explanation:
The Current prompt should be used to make sure that the edge of the top step is shown in a different linetype, as shown by the dashed line in the exhibit. This way, you can set a different linetype for your current layer before using the OFFSET command4.
https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2021/ENU/AutoCAD
NEW QUESTION # 53
In which order should you perform the actions to rotate square (1) to match the angle of square (2).
Move all actions to the answer area and place them in the correct order.
Answer:
Explanation:
Explanation
rotate is a command that rotates selected objects around a base point to an absolute angle. You can specify the base point and the rotation angle by entering values or selecting points. You can also use the reference option to align objects with other objects.
* 1- Start the Rotate command, select the square, and press Enter
* 4- Specify the base point
* 5- Select the Reference option
* 3- Select the lower left corner and the lower right corner as the first and second points of the reference angle
* 2- Enter a value of 0 for the new angle and press Enter
NEW QUESTION # 54
A company's central server holds project directories that contain drawings. Team members who work onsite copy a directory locally to work offline.
Users often report that external references (xrefs) cannot be loaded after copying the project directories to their local machine from the company's central server.
How should you make sure that the users can load the xrefs without error?
- A. Set the external references to use absolute paths
- B. Set the Reference Type of the xrefs to Overlay
- C. Set the Reference Type of the xrefs to Attachment
- D. Set the external references to use relative paths
Answer: D
Explanation:
Explanation
the external references use relative paths to load them without error after copying them locally from a central server. This way, you can avoid broken links due to changes in drive letters or folder names.
https://grabcad.com/tutorials/working-with-external-references-xrefs-autocad
NEW QUESTION # 55
Refer to exhibit.
Exhibit 1:
Exhibit 2:
A CAD designer edits two different dimensions by double-clicking on each dimension.
The first dimension has a dark solid color background behind the dimension text, as shown in exhibit 1. The second dimension contains thy dimension text but no background color, as shown in exhibit 2.
When the dimensions are not being edited, they look the same.
Why docs the second dimension look different?
- A. A background mask has been enabled on the dimension text
- B. The dimension style has designated a frame around the text.
- C. The dimension text field has been replaced
- D. The dimension has a different layer assigned to It.
Answer: A
Explanation:
* Inspect the Dimension Properties:
* Double-click on the first dimension to open the text editor. Notice the dark solid color background behind the dimension text.
* This indicates that a background mask is enabled for this dimension.
* Check the Background Mask Settings:
* Select the dimension and go to the Properties palette.
* Under the 'Text' section, find the 'Fill Color' or 'Background Mask' setting. Ensure it is set to an appropriate color (e.g., the same as the background).
* Compare with the Second Dimension:
* Double-click on the second dimension and observe the absence of a background color during editing.
* In the Properties palette, confirm that the 'Background Mask' is either disabled or set to 'None.'
* Adjust Settings if Needed:
* If you want both dimensions to have a background mask, enable the 'Background Mask' for the second dimension and choose the desired color.
References:
* AutoCAD Documentation on dimension styles and background masks: Dimension Styles
NEW QUESTION # 56
Exhibit.
A CAD designer receives a drawing with an existing trace and update it by adding the new hole as indicated by the arrow in the exhibit.
What displays in the Traces palette after the CAD designer adds their information to the existing trace?
- A. Another Trace numbered 001 In the palette, with the contributor name displayed
- B. Another Trace numbered 002 in the palette
- C. Another unnamed Trace in the palette
- D. Another contributor in the existing Trace In the palette.
Answer: D
Explanation:
* Understanding Traces:
* Traces in AutoCAD allow multiple users to collaborate on a drawing by adding comments and updates.
* Each Trace keeps a history of contributions and modifications made by different users.
* Adding Information to Existing Trace:
* When a CAD designer updates a drawing by adding a new hole, this action is recorded in the existing Trace.
* The Trace palette will show contributors and modifications, maintaining a detailed record.
* Expected Result:
* After adding the new hole, the existing Trace will be updated to show another contributor.
* This helps in tracking changes and identifying who made specific updates.
* Conclusion:
* The Traces palette will display another contributor in the existing Trace after the update.
References:
* AutoCAD User Guide on Using Traces.
* AutoCAD Help Documentation on Collaboration Tools.
NEW QUESTION # 57
......
ACP-01101 dumps Free Test Engine Verified By It Certified Experts: https://www.passreview.com/ACP-01101_exam-braindumps.html
ACP-01101 Exam Free Practice Test with100% Accurate Answers: https://drive.google.com/open?id=1tZsZumPTYlff7uAuH9ozwkeyn31Lu1Xm