[2024] 300-610 All-in-One Exam Guide Practice To your 300-610 Exam!
Preparations of 300-610 Exam 2024 CCNP Data Center Unlimited 206 Questions
Cisco 300-610 certification is an excellent way for IT professionals to enhance their skills and advance their careers in the data center industry. Designing Cisco Data Center Infrastructure certification is recognized globally and is highly valued by employers. It is a challenging certification, but those who pass the exam will have a deep understanding of Cisco data center technologies and will be well-equipped to design and implement complex solutions.
Exam Overview
Before going for the Cisco 300-610 test, you need to know the details of its structure and syllabus to be ready for the application. Thus, it is important to know that you will be given 90 minutes to clear 60 multiple-choice questions. To pass the exam, you should gain at least 825 points. Also, please note that the test is available in the English language and the voucher will cost you $300.
NEW QUESTION # 10
Which two naming formats identify target or initiator iSCSI nodes? (Choose two.)
- A. WWN
- B. EUI
- C. IQN
- D. OUI
- E. WWPN
Answer: A,C
NEW QUESTION # 11
Refer to the exhibit.
An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)
- A. NPV feature on the Cisco MDS Series.
- B. NPIV feature on the Cisco MDS Series
- C. SAN Pin Groups on the Cisco UCS Fabric Interconnects.
- D. Smart Zoning feature on the Cisco UCS Fabric Interconnects
- E. end-host mode feature on the Cisco UCS Fabric Interconnects
Answer: A,B
NEW QUESTION # 12
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION # 13
A network engineer must design a Cisco HyperFlex solution based on these requirements:
* two clusters in the main data center consisting of five HyperFlex nodes
* one edge node for the remote branch
* cluster nodes that use one rack unit of space
Which two devices should be used in the remote branch cluster for this design? (Choose two.)
- A. UCS B200
- B. Fabric Interconnect 6300
- C. HX220c
- D. Gigabit Ethernet Switch
- E. HX240c
Answer: A,E
NEW QUESTION # 14
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Answer:
Explanation:
Explanation
NEW QUESTION # 15
What are two functions of a Network Services Orchestrator in an NFV environment? (Choose two.)
- A. It operates at the resource-facing services layer and provides overall lifecycle management at the network service level.
- B. It provides an API-based northbound interface for transparent integration with systems that operate at the resource-facing services layer.
- C. It provides a standards-based northbound interface for transparent integration with systems that operate at the customer-facing services layer.
- D. It operates at the customer-facing services layer and provides the management interface for the virtual network devices.
- E. It provides a standards-based southbound interface for transparent integration with systems that operate at the customer-facing services layer.
Answer: A,B
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/net_mgmt/msx/3_4/solution_overview/ Cisco_VMS_Sol_Overview.pdf
NEW QUESTION # 16
What is an advantage of using OTV as compared to VPLS for data center redundancy?
- A. uses a proactive MAC advertisement
- B. prevents loops on point-to-point links
- C. provides full-mesh connectivity
- D. provides head-end replication
Answer: B
NEW QUESTION # 17
Which two types of service profile templates does Cisco UCS support? (Choose two.)
- A. connected
- B. temporary
- C. permanent
- D. initial
- E. updating
Answer: D,E
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/ UCSM_GUI_Configuration_Guide_141_chapter28.html#concept_C9D27CE2AA1245EA976DAA79F5BC6808
NEW QUESTION # 18
Drag and drop the technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 19
Drag the appropriate from the left onto the current UDLD modes of operation on the right.
Answer:
Explanation:
NEW QUESTION # 20
An engineer working for a private telecommunication company with an employee ID 4419 90 979 is installing a pair of Nexus 7000 Series Switches and must deploy the solution with these requirements
* The environment must be separated for test and production purposes
* The separation should include control, data and management plane with fault domain isolation and improved security
* The test environment needs only F2 series line cards and a maximum of 256 VLANs Which set of actions meets these requirements?
- A. Use VDC for each of the environments
Configure limit-resource module-type functionality for the test VDC
Enable limit resource vlan for the test VDC. - B. Use VRF for each of the environments
Configure limit-resource module-type functionality for the test VDC.
Enable module-type for the VRF - C. Use VDC for each of the environments
Configure allow feature set for both VRFs
Enable limit-resource vlan maximum for the test VRF - D. Use VRF faQUMIife environments
Configure allow feature set for both VRFs
Enable limit-resource vlan minimum for the test VRF
Answer: A
NEW QUESTION # 21
Refer to the exhibit.
A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?
- A. Each uplink that connects an IOM is configured as a discrete link.
- B. Cisco UCS Manager creates two separate fabric port channels.
- C. Cisco UCS Manager creates a single fabric port channel.
- D. The port channel is disabled until an administrator enables it manually.
Answer: B
Explanation:
Section: Compute Design
NEW QUESTION # 22
After experiencing traffic disruptions from the failure of a single router, a customer asks an engineer to design a solution that will prevent this from occurring in the future. While examining the customer's environment, the engineer discovers that the routers are manufactured by a variety of different vendors, and they have varying amounts of CPU and memory resources. Additionally, several of the customer's applications require the ability to fine-tune the load-balancing parameters between multiple routers. Which solution should be used to meet these requirements?
- A. VRRP
- B. FHRP
- C. GLBP
- D. HSRP
Answer: A
Explanation:
Load balancing can be done by having different VRRP groups and configuring different servers with different default gateways. HSRP and GLBP are Cisco proprietary.
NEW QUESTION # 23
A company Is using Cisco UCS and wants a network orchestration solution to meet these requirements :
centrally manage compute and storage platforms
reduce the time it takes to detect an outage
easily exchange data with TAC to reduce resolution times
The company does not have in-house knowledge about scripting. Which solution must the company choose?
- A. Cisco Intersight
- B. Cisco DCNM
- C. Cisco HyperFlex
- D. Cisco UCS Central
Answer: A
NEW QUESTION # 24
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION # 25
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION # 26
A company purchased a Cisco UCS system with four 5108 Chassis populated with UCS B-Series servers. The environment consists of nine Cisco HyperFlex rack servers.
An engineer must provision virtual machines using an orchestration tool to optimize overall deployment time.
Which orchestration must be used to meet this requirement?
- A. Cisco Intersight
- B. Cisco DNA Center
- C. Cisco Network Assurance
- D. Cisco AppDynamic
Answer: A
NEW QUESTION # 27
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION # 28
Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?
- A. UDLD
- B. MCP
- C. BFD
- D. LLDP
Answer: A
Explanation:
Section: Network Design
NEW QUESTION # 29
Which technology enables Layer 2 extension between remote data center sites?
- A. DMVPN
- B. OTV
- C. GRE
- D. FCIP
Answer: B
Explanation:
Section: Network Design
Explanation/Reference: https://netcraftsmen.com/spanning-layer-2-between-data-centers/
NEW QUESTION # 30
Drag the requirements from the left onto the correct policy types on the right.
Answer:
Explanation:
NEW QUESTION # 31
Which two methods mitigate congestion in a SAN network? (Choose two.)
- A. Configure the port monitor to allow categorization of a specific device as slow.
- B. Use the port-monitor command to detect slow drain devices.
- C. Configure the port channel to enable individual buffer-to-buffer credits.
- D. Configure ER_RDY to allow splitting of each ISL between switches into separate virtual links.
- E. Configure the flow control for the FC to use R_RDY.
Answer: A,B
Explanation:
Reference:
cisco_mds9000_interfaces_config_guide_8x/congestion_avoidance_isolation.html
NEW QUESTION # 32
A company has added a new FCoE storage array to increase the performance of datastore access for end users. This storage array is directly connected to the Cisco Nexus 5672UP switches using four 10G port-channel interfaces. After deployment, the end users fail to access the datastore compared to the older solution. A network engineer verified the port-channel interface and finds that the congestion occurs when PFC frames are generated at the FCoE ingress interface. Which action must be taken to resolve the congestion issue?
- A. Reserve bandwidth for FCoE VLAN on the port-channel interface connected with storage.
- B. Increase the queuing buffer in the port-channel interface connected to the storage array.
- C. Add an additional FCoE VLAN to the SAN network.
- D. Enable the FCoE class in QoS on Cisco Nexus 5672UP switches.
Answer: D
NEW QUESTION # 33
Drag and drop the technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 34
A network engineer must design a data center network with four Cisco Nexus 7706 switches. The switches will be installed in primary and secondary data centers in vPC domains. The two data centers must be connected via Layer 2 links and provide the maximum throughput, redundancy, and avoid port-blocking spanning-tree design.
Which deployment model meets these requirements?
- A. dual-sided dual vPC
- B. single-sided dual vPC
- C. dual-sided single vPC
- D. single-sided single vPC
Answer: A
NEW QUESTION # 35
......
Focus on 300-610 All-in-One Exam Guide For Quick Preparation: https://www.passreview.com/300-610_exam-braindumps.html
Practice To 300-610 - PassReview Remarkable Practice On your Designing Cisco Data Center Infrastructure Exam: https://drive.google.com/open?id=1tN_ukrwL9eVhOqKJMva2SxfhKrAYzhFU