2023 Realistic NCM-MCI-5.20 Dumps Latest Nutanix Practice Tests Dumps
NCM-MCI-5.20 Dumps PDF - NCM-MCI-5.20 Real Exam Questions Answers
Nutanix NCM-MCI-5.20 (Nutanix Certified Master - Multicloud Infrastructure 5.20) Exam is designed for IT professionals who want to demonstrate their expertise in managing and deploying Nutanix infrastructure across multiple clouds. NCM-MCI-5.20 exam covers a wide range of topics, including configuration and management of Nutanix clusters, integration with public cloud providers, monitoring and troubleshooting, and disaster recovery. The NCM-MCI-5.20 exam is intended for experienced Nutanix professionals who have already earned the Nutanix Certified Professional (NCP) and Nutanix Certified Advanced Professional (NCAP) certifications.
NEW QUESTION # 40
A customer has NearSync configured. When the administrator tries to restore a snapshot from 3 minutes ago, it is not available. The snapshots are happening at 15-minute intervals instead of at the 5-minute configured interval. When the protection domain was initially set up, the snapshots were happening at the expected 5-minute interval.
What should the customer do to enable the snapshots to happen at the expected interval?
- A. Change the protection domain to use Async DR
- B. Configure the protection domain to take snapshots on 15-minute intervals
- C. Fix a connectivity issue because the protection domain reverted to Async
- D. Utilize Metro Availability to meet this requirement
Answer: C
NEW QUESTION # 41
A system administrator needs to shut down an AHV node in a Nutanix cluster without causing service disruption. The administrator checks data resiliency and verifies that the cluster can tolerate a node down.
Which three steps should the administrator perform next? (Choose three.)
Answer:
Explanation:
1 allow vms
2 sd CVM
3 sd node
NEW QUESTION # 42
An administrator has been tasked with delivering a report on all nutanix Field Advisors (FAs) Affecting each of the clusters.
What is the most efficient way to collect this data?
- A. Review Field Advisories published on the Support Portal
- B. Review the discoveries information on the support Portal
- C. Use Prism to run NCC and Check for information on FAs
- D. Request an environmental audit from the Nutanix Support
Answer: C
NEW QUESTION # 43
An administrator is deploying an application using Nutanix Volumes. After configuring the volume group and connecting the guest's iSCSI initiator to the volume group, they begin performance testing.
The administrator learns that performance on the virtual disk attached to the iSCSI initiator is far less than that of a virtual disk connected directly to the VM.
Which situation is causing this condition?
- A. The duster data services IP address is a bottleneck, shared with other iSCSI traffic
- B. The performance test is generating small block random 10.
- C. Data Locality ensures that VM attached disks are always faster than iSCSI volumes.
- D. The VM's iSCSI traffic is being routed to the data services IP subnet
Answer: A
NEW QUESTION # 44
Which command should an administrator run from the CLI to view the uplink state of all AHV nodes in the cluster?
- A. manage_ovs show_uplinks
- B. allssh manage_ovs show_uplinks
- C. manage ovs show uplinks
- D. allssh show_uplinks
Answer: B
NEW QUESTION # 45
After the migration, some SQL queries take longer to execute than prior to migration.
The following SQL best practices were applied while creating the SQL VM on Nutanix:
* 8 vDisks per SQL server VM
* Database and Log files on separate vDisk
* 2 TempDB database drives and 1 TempDB log drive
What should the administrator to do improve the SQL Server performance?
- A. Redistribute existing data by creating additional database files and disable autogrowth
- B. Create multiple SQL log files and disable autogrowth
- C. Redistribute existing data by creating additional database file and enable autogrowth
- D. Create multiple TempDB data files and enable autogrowth
Answer: C
NEW QUESTION # 46
An administrator is configuring software only. Data-at-Rest Encryption on their Nutanix cluster. They are planning to deploy a third-party key management server (KMS).
Where should this server be hosted?
- A. As a single VM on the Nutanix cluster
- B. As a clustered VM setup on the Nutanix cluster
- C. As a single VM deployed on the host that contains the Prism leader CVM
- D. On hardware external to the Nutanix duster
Answer: D
Explanation:
NEW QUESTION # 47
A company's Security team has requested that all IT resources be hardnened.
What should an administrator do to increase the security of the ntuanix environment ?
- A. Enable Flow
- B. Enable Cluster Lockdown
- C. Enable STIG
- D. Enable Prism Central KMS
Answer: B
NEW QUESTION # 48
An administrator needs to replace an aging SAN and move to a hyper-converged infrastructure. The existing environment consists of the following hosts that are connected to the SAN:
* 5xAIX hosts
* 3x Hyper-V hosts
* 9xESXi hosts
* 2x physical SQL Clusters (Windows Server 2012R2 hosts)
After deploying a Nutanix AHV cluster, which two actions should the administrator take to meet the requirements? (Choose two.)
- A. Migrate the ESXi and Hyper-V workloads using Move.
- B. Deploy Files to support the AIX hosts.
- C. Migrate the ESXI workloads to AHV using Move.
- D. Deploy Volumes to support the AIX and SQL workloads.
Answer: A,D
NEW QUESTION # 49
An administrator is implementing a VDI solution. The workload will be a series of persistent desktops in a dedicated storage container within a four-node cluster. Storage optimizations should be set on the dedicated storage container to give optimal performance including during a node failure event.
Which storage optimizations should the administrator set to meet the requirements?
- A. Compression only
- B. Deduplication and Erasure Coding
- C. Compression, Deduplication, and Erasure Coding
- D. Compression and Deduplication
Answer: B
Explanation:
Reference:
NEW QUESTION # 50
How should an administrator enable the recycle bin on a nutanix cluster?
- A. Select Retain Deleted VMs for 24h in the cluster details page of the cluster setting
- B. select Retain Deleted VMs for 8h in the cluster Details Page of the cluster setting
- C. Select the Enable Recycle Bin checkbox on the storage Overview page
- D. Select the enable recycle bin checkbox in the configure CVM page of the cluster setting
Answer: A
NEW QUESTION # 51
A systems administrator needs to add more VMs to their Nutanix cluster.
Which two actions should the administrator perform to determine if the current cluster can accommodate the new VMs? (Choose two.)
- A. Enable Deduplication and Erasure Coding.
- B. Utilize Optimize Resources for VM efficiency.
- C. Determine utilization with Cluster Runway.
- D. Perform an Inventory with Life Cycle Management.
Answer: B,C
Explanation:
Reference:
NEW QUESTION # 52
An administrator inherits a new Nutanix environment and logs in to a CVM to check the network configuration. The configuration is as follows:
Which action should the administrator take to improve network performance?
- A. Add eth0 and eth1 to the br0-up bond
- B. Configure VLAN tagging both on br0 and br1 and their physical interfaces.
- C. Remove one 10 Gbs interface from br0-up to make sure all 10 Gbs can be used.
- D. Configure balance-sib or balance-tcp mode for br0-up if switch configuration allows
Answer: D
NEW QUESTION # 53
An administrator receives reports that VDI desktop performance in an 8-node Nutanix VDI environment is poor. Opening applications takes between 1 and 2 minutes.
When investigating the issue, the following conditions are found:
* Cluster memory utilization: 80%
* Cluster SSD utilization: 70%
* Average VM CPU Wait Time: 11%
* CVM CPU utilization: 75%
Which action should be taken to improve VDI performance?
- A. Add memory to the nodes in the cluster.
- B. Add CPU resources to the cluster.
- C. Increase the number of vCPU cores allocated to the CVM.
- D. Increase the amount of SSD storage in the cluster.
Answer: B
NEW QUESTION # 54
Which Nutanix Product Provide S3-Compatible Storage?
- A. Files
- B. Objects
- C. Mine
- D. Volumes
Answer: B
NEW QUESTION # 55
Refer to the exhibit.
An administrator has configured Prism Central to email daily digest of alerts on a cluster, after a week, administrator notices that digests are not being received.
What is the most likely cause of the issue?
- A. Nutanix support is not enabled as a recipient
- B. the recipient address is not registered with Nutanix
- C. the SMTP server is not configured properly
- D. the tunnel connection has not been enabled
Answer: C
NEW QUESTION # 56
An administrator receives an error indicating that the CVMs in the cluster are not syncing to any NTP servers. An investigation of the issue finds:
* The NTP servers are configured in Prism
* The time on all CVMs is the same
* Both the CVMs and AHV hosts are configured for the UTC time zone
Which two steps can be taken to troubleshoot this issue? (Choose two.)
- A. Restart the chronos service on all CVMs.
- B. On a CVM. run the command a Hash ntpq -pn.
- C. Restart genesis on all CVMs.
- D. Confirm that the NTP servers are reachable from the CVMs.
Answer: B,D
NEW QUESTION # 57
An administrator has planned a RAM upgrade on a 3-node Nutanix cluter.
Which step should be performed first, for a non-disruptive memory upgrade?
- A. Power off one host at time
- B. Stop one CVM at time
- C. Live Migrate VMs
- D. Run NCC
Answer: D
NEW QUESTION # 58
A Nutanix cluster is equipped with four nodes. Four VMs on this cluster have been configured with a VM-VM anti-affinity policy and are each being hosted by a different node.
What occurs to the cluster and these VMs during an AHV upgrade?
- A. One node hosts two VMs while the node being upgraded is in maintenance mode.
- B. The AHV pre-upgrade checks fail until the four VMs are powered off.
- C. The AHV pre-upgrade checks fail until the administrator disables the anti-affinity policy.
- D. One VM out of the four powers down when the node hosting it reboots.
Answer: C
NEW QUESTION # 59
......
Nutanix Certified Master - Multicloud Infrastructure (NCM-MCI) 5.20 Certification Exam is designed for IT professionals who want to validate their skills and knowledge in managing and maintaining Nutanix’s multicloud infrastructure. NCM-MCI-5.20 exam is an advanced-level certification that requires a deep understanding of Nutanix’s products and services, as well as practical experience in deploying and managing multicloud environments.
Nutanix Certified Master - Multicloud Infrastructure (NCM-MCI) 5.20 Certification Exam is designed to test the skills and knowledge of IT professionals when it comes to managing and deploying Nutanix solutions across multicloud infrastructure. NCM-MCI-5.20 exam covers a range of topics, including installation, configuration, and management of Nutanix clusters, as well as the integration of public cloud services and virtualization technologies.
NCM-MCI-5.20 Premium Exam Engine pdf Download: https://www.passreview.com/NCM-MCI-5.20_exam-braindumps.html
NCM-MCI-5.20 Exam [2023] Dumps Nutanix PDF Questions: https://drive.google.com/open?id=1qtOeBamwaKw4O-79xXRrlYdiqKrI3mZ6