2023 Latest IBM C1000-140 Real Exam Dumps PDF
C1000-140 Exam Dumps, C1000-140 Practice Test Questions
NEW QUESTION 23
What must be created before the Use Case Manager app can be used?
- A. Security Profile
- B. Authorized Service Token
- C. Custom DSM
- D. User roles
Answer: C
NEW QUESTION 24
Where is a custom log source type created?
- A. DSM editor
- B. Network Activity tab
- C. Log Source Management app
- D. Qradar command line interface
Answer: A
NEW QUESTION 25
A QRadar deployment professional needs to transfer the configuration of a distributed environment (one Console and one EP, not using HA) onto an All-in-One (AIO) system to run some forensics against data that will be added later.
What approach should the deployment professional suggest for building the new AIO?
- A. Use rsync to transfer the contents of the /store partition to the new system.
- B. Because the destination environment does not have the same number of appliances, the only option is to use the content management tool (CMT) to transfer the security configuration.
- C. The configuration of the source environment should be backed up and then restored on the new AIO. After the system is up, the EP can be removed only by use of back-end PSQL commands.
- D. The configuration of the source environment should be backed up and then restored on the new AIO. After the system is up, the EP can be removed by use of the GUI.
Answer: C
NEW QUESTION 26
What is the directory where a backup archive file needs to be placed so that QRadar can automatically import it?
- A. /storetmp/imports/backups
- B. /store/backupHost/inbound
- C. /storetmp/backups
- D. /store/imports/inbound
Answer: B
NEW QUESTION 27
What approach does QRadar take when it imposes EPS license (not hardware) limits on events that temporarily spike above that limit?
- A. Excessive events in a spike cause a System Notification that advises the customer to increase their EPS license allocation.
- B. QRadar EPS license allocation is implemented with a hard cutoff to ensure resources are not saturated.
- C. QRadar EPS licensing is measured as an average over a 24-hour period, which allows spikes to be handled gracefully.
- D. During the spike, excess events are written to a queue, and they are processed after the EPS rate drops.
Answer: C
NEW QUESTION 28
What does QRadar attempt to do when the system generates "Accumulator is falling behind" warnings?
- A. Time-series graphs and reports omit columns for the period when the problem occurred.
- B. QRadar tries to aggregate the events and flows during the next 60 seconds.
- C. QRadar automatically drops the incoming events and flows during that time period.
- D. The events that QRadar processes during that period are categorized as stored.
Answer: D
NEW QUESTION 29
Which type of network hierarchy can be configured in QRadar?
- A. /24 range of IP addresses
- B. Any range of IP addresses
- C. IPv6 only
- D. IPv4 only
Answer: B
NEW QUESTION 30
A QRadar deployment professional designs a multi-tenant environment where each tenant is permitted a quantity of events per second (EPS).
In a discussion with the service provider (who provides the security monitoring services to each tenant), how should the deployment professional describe the licensing options available?
- A. The domain sets EPS limits, so each tenant needs to have only one domain. This way, over-license buffering can be used to handle EPS spikes.
- B. Per-tenant EPS limits can be set if the tenants are defined by event collectors. Then over-license buffering can be used to handle EPS spikes.
- C. If each domain and tenant is defined by log source groups, the EPS limit can be shared by the log source groups used for each tenant. Over-license buffering is defined at the event collector.
- D. Per-tenant EPS limits can be set, but any events over the EPS will be dropped from the pipeline; over-license buffering will not be used to handle EPS spikes.
Answer: A
NEW QUESTION 31
The /store for a QRadar HA setup was migrated to a Fibre Channel device. High Availability is not needed on this cluster, and it needs to be disconnected.
What changes are required before disconnecting the HA cluster in this scenario?
- A. Edit the /etc/fstab on only the primary HA host to remove the noauto option from /store and /storetmp.
- B. No changes are required before disconnecting the HA cluster.
- C. Edit the /etc/fstab on only the secondary HA host to remove the noauto option from /store and /storetmp.
- D. Edit the /etc/fstab on the primary HA host and secondary HA host to remove the noauto option from /store and /storetmp.
Answer: D
NEW QUESTION 32
A deployment professional is about to add a secondary appliance to a QRadar high availability deployment. It is confirmed that both the primary and the secondary appliances are on the same QRadar version. However, the hardware configuration of both appliances is different.
What must be confirmed before adding the secondary appliance to the high availability deployment?
- A. The combined size of the /store and /transient partitions on the secondary host must be equal to or larger than the /store partition on the primary host.
- B. The primary host must contain more physical interfaces than the secondary.
- C. The combined size of the /store and /transient partitions on the primary host must be larger than the /store partition on the secondary host.
- D. The secondary host must use a different management interface than the primary HA host.
Answer: A
NEW QUESTION 33
For the management of applications with Qradar Assistant, which of these is not an option?
- A. Start All Instances
- B. Create New Instance
- C. Pause All Instances
- D. Delete All Instances
Answer: C
NEW QUESTION 34
A QRadar deployment professional was asked to plan a system migration from an on-premises, appliance-based environment to an AWS environment. As part of this transition, the Ariel data must be moved to the new logical appliances and must be searchable by using the existing mechanisms (for example, to filter by log source).
Which approach can the deployment professional use to migrate the configuration after the VM is built (and before the Ariel data is restored)?
- A. Use rsync to transfer the contents of the /store partition to the new system
- B. Export the security content with CMT and import using the REST-API
- C. Use the Content Management Tool (CMT) to transfer the security configuration
- D. Use the QRadar configuration backup and restore process to transfer all configurations
Answer: B
NEW QUESTION 35
What must a deployment professional select when defining a new flow source?
- A. The source IP address
- B. The flow source type
- C. The router brand
- D. The destination port
Answer: B
NEW QUESTION 36
When adding a Data Node to an Event Processor, what are the minimum bandwidth and maximum latency requirements?
- A. 1 Gbps link and 10 ms latency
- B. 10 Gbps link and 100 ms latency
- C. 10 Gbps link and 10 ms latency
- D. 1 Gbps link and 100 ms latency
Answer: C
NEW QUESTION 37
Which industry standard security framework is incorporated into the QRadar 7.4.3 environment, which allows the QRadar deployment professional to link rules and building blocks to coverage in the framework?
- A. NIST Cybersecurity Framework
- B. Lockheed Martin Cyber Kill Chain
- C. MITRE ATT&CK
- D. US DoD Diamond Model
Answer: D
NEW QUESTION 38
A QRadar deployment professional wants to integrate a dynamic data set like asset information so that QRadar can use the latest information in the new data set to correlate the rules and alerts.
How can the deployment professional achieve this?
- A. Import the dynamic data in the reference set and use these reference sets in rules and building blocks.
- B. Use the UCM app.
- C. Use the QRadar Search to search each item in the list of imported data set.
- D. Use the Threat Intelligence app.
Answer: C
NEW QUESTION 39
......
PDF (New 2023) Actual IBM C1000-140 Exam Questions: https://www.passreview.com/C1000-140_exam-braindumps.html
Dumps Moneyack Guarantee - C1000-140 Dumps UpTo 90% Off: https://drive.google.com/open?id=1D0b9ecqEB-_V6I4HonYUvgzeztD9fJGY